-
6V to 12V Mini Vacuum/Air Pump
- Wide operating voltage range (6V – 12V DC) for flexible power options.
- Compact and lightweight design for easy installation in tight spaces.
- Low noise and low power consumption for efficient operation.
- Durable construction ensures long-lasting performance.
- Ideal for vacuum suction, air sampling, and small pneumatic applications.
₹95.00 (Price is Exclusive of GST)6V to 12V Mini Vacuum/Air Pump
₹95.00 (Price is Exclusive of GST) -
CH340G SOIC16 USB to Serial TTL-RS232 converter IC (Pack of 2)
- Full speed USB device interface, conforms to USB Specification Version 2.0, only needs crystal and
capacitance external. - Emulate standard serial interface, used to upgrade the former peripheral device, or add excess serial
interface through USB. - Totally compatible with the serial application program in a computer endpoint Windows operation system.
- Hardware full duplex serial interface, set transceiver buffer, supports communication baud rate varies
from 50bps to 2Mbps. - Supports common MODEM liaison signal RTS, DTR, DCD, RI, DSR and CTS.
- Through adding level converter equipment to supply RS232, RS485, RS422 and another interface.
- Supports IrDA criterion SIR infrared communication, supports baud rate varies from 2400bps to
115200bps.
₹98.00 (Price is Exclusive of GST)CH340G SOIC16 USB to Serial TTL-RS232 converter IC (Pack of 2)
₹98.00 (Price is Exclusive of GST) - Full speed USB device interface, conforms to USB Specification Version 2.0, only needs crystal and
-
CP2102 USB 2.0 to TTL UART Serial convertor Module
Features:-
Stable and reliable chipset CP2102.
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 6pin connector.
6pins for 3.3V, RST, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Byte receive buffer; 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
₹99.00 (Price is Exclusive of GST)CP2102 USB 2.0 to TTL UART Serial convertor Module
₹99.00 (Price is Exclusive of GST) -
28BYJ-48 Stepper Motor
- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm
₹99.00 (Price is Exclusive of GST)28BYJ-48 Stepper Motor
₹99.00 (Price is Exclusive of GST) -
MAX7219 Dot Led Matrix Module MCU Control LED Display Module
- Driver Chip:Â MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 320 mA
- Display Dimensions: 32x32x6 (LxWxH) mm
- PCD Dimensions: 50×32 (LxW) mm
₹100.00 (Price is Exclusive of GST)MAX7219 Dot Led Matrix Module MCU Control LED Display Module
₹100.00 (Price is Exclusive of GST) -
₹100.00 (Price is Exclusive of GST)6 Feet USB 2.0 to RS232 DB9 Serial Adapter Cable
₹100.00 (Price is Exclusive of GST) -
Infrared TSOP Obstacle Avoidance Sensor Module
- Detection distance: 2-40cm
- IO Interface: 4-wire interfaces (- / + / S / EN)
- Output signal: TTL level
- Adjustment: adjust multi-turn resistance
- Effective angle: 35 °
₹100.00 (Price is Exclusive of GST)Infrared TSOP Obstacle Avoidance Sensor Module
₹100.00 (Price is Exclusive of GST) -
5MM IR Transmitter and Receiver LED TX RX Pair Photodiode
R TX RX size: 5mm diameter package
IR LED current rating: 30mA nominal, 600mA pulse loading at 1% duty cycle
IR LED wavelength: 940nM
Photodiode peak response wavelength: 940nM”₹100.00 (Price is Exclusive of GST)5MM IR Transmitter and Receiver LED TX RX Pair Photodiode
₹100.00 (Price is Exclusive of GST) -
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Features :
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
₹100.00 (Price is Exclusive of GST)CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
₹100.00 (Price is Exclusive of GST) -
₹102.00 (Price is Exclusive of GST)
Yellow 0.28″ Mini 2 Wire Dc Voltmeter 0.2-100v Digital Display Voltmeter Gauge LED Voltage
₹102.00 (Price is Exclusive of GST) -
4 Channel 5V Relay Module
- 5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
- Equipped with high-current relay, AC250V 10A; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Indication LED’s for Relay output status.
₹105.00 (Price is Exclusive of GST)4 Channel 5V Relay Module
₹105.00 (Price is Exclusive of GST) -
Aluminum GT2 Timing Pulley 36 Tooth 8mm Bore For 6mm Belt
- Outer Diameter: 25.5 mm.
- Inner Diameter: 8 mm.
- Width: 17 mm.
- Weight: 14 gm.
- Material: Aluminum.
- No. of teeth: 36 on each side
₹105.00 (Price is Exclusive of GST)Aluminum GT2 Timing Pulley 36 Tooth 8mm Bore For 6mm Belt
₹105.00 (Price is Exclusive of GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
