-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST)
-
GT2 Aluminium Timing Pulley 60 teeth 5mm Bore
GT2 toothed pulley with 2mm pitch teeth, suitable for use with GT2 neoprene reinforced nylon or steel reinforced polyurethane belts to be chosen depending on the type of end use. Made entirely of aluminium.
Such a pulley reduces backwash due to accelerations and directional changes, ensuring good resolution when used on automatic system such as 3D printer and small CNC systems.
Features:
- High Quality Aluminium
- Excellently Machined
- Durable and practical
- Minimizes the chance of the belt slipping
- Easy to use
₹205.00 (excl. GST)GT2 Aluminium Timing Pulley 60 teeth 5mm Bore
₹205.00 (excl. GST) -
GT2 Close-Loop Rubber Timing Belt for 3D Printer
Features:
- Type: Closed Loop
- Length: 158 mm
- Width: 6mm
- Good quality and durable low noise
₹75.00 (excl. GST)GT2 Close-Loop Rubber Timing Belt for 3D Printer
₹75.00 (excl. GST) -
GT2 Close-Loop Rubber Timing Belt for 3D Printer
GT2 Close-Loop Rubber Timing Belt
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 188mm
- Belt Height: 1.52 mm
- Tooth Height: 0.76mm
- Shape: Closed Loop
₹43.00 (excl. GST)GT2 Close-Loop Rubber Timing Belt for 3D Printer
₹43.00 (excl. GST) -
GT2 Open Loop Timing Belt 6mm Width for 3D Printer-5 Meter
GT2 Open Loop Timing Belt
Features:
- Precision registration and timing with no loss of high torque carrying capability
- Minimal vibration and chordal effectPositive slip proof engagement
- Wide speed range, especially important when the entire speed range is developed from a single source
- Virtually no elongation (stretching) due to wear
- Power transmission efficiency is not lost with the use
- A clean operation, no need for lubrication
- Reduced noise.
- Long, dependable trouble-free service.
₹485.00 (excl. GST)GT2 Open Loop Timing Belt 6mm Width for 3D Printer-5 Meter
₹485.00 (excl. GST) -
GT2 Timing Belt 200mm Width-6mm Closed-Loop Rubber Belt
GT2 Timing Belt 200mm Width-6mm
1 x GT2 Timing Belt 200mm Width-6mm Closed-Loop Rubber Belt for 3D Printer
₹46.00 (excl. GST)GT2 Timing Belt 200mm Width-6mm Closed-Loop Rubber Belt
₹46.00 (excl. GST) -
GT2 Timing Belt 400mm Width-6mm Closed-Loop Rubber Belt for 3D Printer
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 400mm
- Belt Height: 1.52 mm
- Tooth Height: 0.76mm
- Shape: Closed Loop
₹66.00 (excl. GST)GT2 Timing Belt 400mm Width-6mm Closed-Loop Rubber Belt for 3D Printer
₹66.00 (excl. GST) -
GT2 Timing Idler Pulley 20 Tooth For 6mm Belt 20 Tooth 5mm Bore-2Pcs
For precise motion control, GT2 belts and pulleys offer excellent precision at a great price. This pulley is meant for use with GT2 6mm wide belts only – MXL belts will slip due to the different tooth profiles.
Features:
- Adopting high-quality Aluminum Alloy material，sturdy and durable
- Adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively
₹216.00 (excl. GST)GT2 Timing Idler Pulley 20 Tooth For 6mm Belt 20 Tooth 5mm Bore-2Pcs
₹216.00 (excl. GST) -
GY-271 HMC5883L 3-axis Electronic Compass Module
GY-271 HMC5883L 3-axis
- 3-axis magnetic electronic compass.
- Precise heading information.
- Operating Voltage: 3 -5 V DC.
- Driver Chip: HMC5883L.
- Communication: I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
₹118.00 (excl. GST)GY-271 HMC5883L 3-axis Electronic Compass Module
₹118.00 (excl. GST) -
GY-273 HMC5883L Triple Axis Magnetometer Sensor Module
Features:
- 1-2 degree heading accuracy.
- A range of -8 to +8 Gauss.
- Communication: IIC communication protocol.
₹175.00 (excl. GST)GY-273 HMC5883L Triple Axis Magnetometer Sensor Module
₹175.00 (excl. GST) -
GY-51 LSM303DLH 3-Axis Magnetic Field Acceleration Module
Features:
- Integrated three-axis magnetometer and a tri-axial accelerometer with a digital interface.
- Comes with automatic detection.
- Also incorporates high-performance accelerometers.
- Accelerometers can run on LOW power mode.
₹276.00 (excl. GST)GY-51 LSM303DLH 3-Axis Magnetic Field Acceleration Module
₹276.00 (excl. GST) -
GY-521 ADXL335 Module 3-axis Analog Output Accelerometer
Features :
- Onboard LDO Voltage regulator
- Can be interfaced with a 3V3 or 5V Microcontroller.
- All necessary Components are populated.
- Ultra-Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build-in ultra-low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high current electronics
- Power LED
- Designed for 5V logic level
₹115.00 (excl. GST)GY-521 ADXL335 Module 3-axis Analog Output Accelerometer
₹115.00 (excl. GST) -
HC-05 Bluetooth Module
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2
- Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution
- Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes
₹170.00₹275.00(excl. GST)HC-05 Bluetooth Module
₹170.00₹275.00(excl. GST)
