-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
Anycubic Mega S 3D Printer
- Works Out Of the Box, 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners, The rigid metal frame can minimize the shaking to improve the print quality
- Upgraded Extruder Design, Titan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy
- Resume Print and Sensor Detection, Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage, One click to resume from the last recorded position when suffering power outages, And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost, printing volume reaches 8.27 x 8.27 x 8.07 inches
- ANYCUBIC Ultrabase, Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print
- More Function, TFT Touch Screen, As responsive as operating on the phone, All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours professional customer service
₹13,223.00Anycubic Mega S 3D Printer
₹13,223.00 -
Creality Ender-3 FDM 3D Printer + PLA Black
- Easy and Quick Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrusion; V-Shape with POM wheels makes it move noiseless, smoothly, and durable.
- Safety Protected Power Supply: Only needs 5 minutes for the hotbed to reach 110℃.
- It is a great project for middle school and high school-aged students. The perfect gift to spark a lifelong love for science and engineering, and provide a deeper understanding of machinery and robotics.
Modeling Technology : FDM(Fused Deposition Modeling） Printing Size : 220x220x250mm Printing Speed : 180mm/s Filament : 1.75mm PLA, TPU, ABS Working Mode : Online or SD offline Filament : White ₹12,898.00Creality Ender-3 FDM 3D Printer + PLA Black
₹12,898.00 -
YiHua 995D Hot Air Blower with Soldering Iron
The temperature fluctuation range ±1°C. Working Temperature Adjustable from 100 – 250 to 500C. Iron soldering station adapt to correct a temperature deviation caused by the environmental impact or replacement of heating elements, fans, soldering irons etc. The temperature range is corrected: ±50C.
Digital Display: With LED Screen digital display, shows temperature so you can easy control the temperature. Easy to deal with large joints, small spots and solder joint de-soldering. Operation Parameters Rated voltage 220V 50Hz Total Power 50W +/-10% Constant Temperature Power.
₹12,500.00 -
Quadcopter Drone DIY Kit – V2
Drone DIY Kit Package Contents:
1 x F450 Quadcopter Frame
1 x Flysky i6 Radio Transmitter and Receiver with programmer
4 x 30A ESC
4 x A2212 1000/1400 KV Brushless Motor
1 x Naze 32 Flight Control Board
4 x 1045 (2CW+2CCW) Black Propeller
1 x Lipo Battery ChargerFeatures:
F450 Frame based Quadcopter Kit
Includes 30A ESC for speed control and Lipo battery Charger
Flight Control board Naze 32/ KK 2.1.5
Flysky i6 Radio controller transmitter receiver wireless
Includes Brushless motors and Propellers₹12,500.00Quadcopter Drone DIY Kit – V2
₹12,500.00 -
Ender 3 FDM 3D Printer
Features
- Easy and Quick Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrusion; V-Shape with POM wheels makes it move noiseless, smoothly, and durable.
- Safety Protected Power Supply: Only needs 5 minutes for the hotbed to reach 110℃.
- It is a great project for middle school and high school-aged students. The perfect gift to spark a lifelong love for science and engineering, and provide a deeper understanding of machinery and robotics.
-
Max Print Speed : 80mm/s Auto Levelling : NA Print Bed Removeable : NA Supported files : STL，OBJ，G-Code Camera : NA Connectivity : USB or SD offline
₹12,122.00Ender 3 FDM 3D Printer
₹12,122.00 -
Anycubic Kobra Neo-3D Printer
Technical Specifications
● Leveling: 25-point automatic leveling
● Printing platform: 8.7 x 8.7 inches / 220 x 220 mm
● Filament run-out detection: optional
● Printing material: PLA / ABS / PETG & TPU
● Nozzle size: ø 0.4 mm (replaceable)
● Nozzle temperature: ≤ 500 °F / 260 °C
● Hot bed temperature: ≤ 230 °F / 110 °C
● Printing speed: ≤100 mm/s (Max speed)
● Control panel: 2.4″ LCD screen with a control knob
● Z-axis: single threaded rod
● Printing dimensions: 250 x 220 x 220 mm (HWD)
● Machine dimensions: 490 x 445 x 443 mm
₹12,100.00Anycubic Kobra Neo-3D Printer
₹12,100.00 -
Robotics & AI Kit
Robotics & AI Kit
- Expansion Board – 1
- Microcontroller Board/ Microprocessor Board – 1
- Ultrasonic Sensor – 2
- Potentiometer Module – 4
- Light Sensor – 4
- Servo Motor – 6
- Magnetic Sensor – 1
- LED Module – 4
- Flame Sensor – 1
- Push To Lock Switch Module – 4
- IR Sensor – 1
- DC Motor – 4
- Microcontroller Board/ Microprocessor Board – 1
- Soil Moisture Sensor – 1
- Push Button Switch Module – 4
- Seven Segment Display – 1
- Temperature Sensor – 1
- Buzzer Module – 1
₹11,823.00Robotics & AI Kit
₹11,823.00 -
Quadcopter Drone DIY Kit – V1
- Built from quality glass fiber and polyamide nylon.
- Integrated PCB connections for direct soldering of your ESCs
- Pre-threaded brass sleeves for all of the frame bolts.
- Colored arms for orientation to keep you flying in the right direction.
- Large mounting tabs on main frame bottom plate for easy camera mounting.
- Easy assembly.
₹10,500.00Quadcopter Drone DIY Kit – V1
₹10,500.00 -
Basic Robotics kit
Basic Robotics kit
Breadboard – 1
DC Motor – 1
Buzzer – 1
Green LED – 1
Red LEDs – 2
Push Button Switches – 3
Slide Switch – 1
Red Alligator Clip – 1
Black Alligator Clip – 1
Connecting Towers – 6
10kΩ Resistor – 1
20kΩ Resistor – 1
3.3kΩ Resistor – 1
Capacitor – 1
Jumper Wires – 3
₹10,170.00Basic Robotics kit
₹10,170.00 -
Cretile Voyager Kit – (37 Cretiles and Accessories)
Set of 37 Cretile circuit modules:
- Battery/Power Supply – 1
- Battery/Power Supply – 2
- Geared Motor – 1
- Geared Motor – 2
- High Speed Motor
- Obstacle Sensor – 1
- Obstacle Sensor – 2
- Switch
- Buzzer
- Inverter – NOT Gate
- Dimmer
- Light Sensor
- Light
- Copy
- Submersible Water Pump
- Sensor Base – 1
- Sensor Base – 2
- Transmitter
- Receiver
- Pulse/Delay (Timing functionality)
- Pump/Motor
- Push Button – 1
- Push Button – 2
- Sound Sensor
- Motion Sensor
- Connectivity Sensor
- Limit Switch (approach sensor)
- Wire
- U-Right
- Robotic Wheel – 1
- Robotic Wheel – 2
- Pipe for pump
- Small Wheel
- USB Rechargeable 9V Battery
- Non-rechargeable 9V battery
- Pulley
- Fan Blade
These Cretile blocks can be used to create various projects. Your creativity will define what you can create out of it.
₹9,838.00 -
G1200 1200 x 12MP Multipurpose Digital Electronic Microscope with 7″ LCD Display
Save & output of Images and Videos: This LCD Screen digital microscope is equipped with a Micro SD card slot and 32G of the card. You can save the images and videos obtained during your observations to the 32G tf card and output.(Maximum support for 64G Micro SD cards)
Great Gift : This LCD digital microscope is perfect for circuit board inspection, QC inspection, watch/clock repair, textile industrial, kids education inspection, biological observation (not suitable for cells), medical professionals, scientific researchers, insects, coins, jewelry, and stamps. It’s the best gift for children, students, hobbyists, and other users.
₹9,500.00 -
ATL Package 4 (DIY Tinkering and Safety Equipments)
The Atal Tinkering Lab (ATL) initiative is aimed at enhancing the Indian Education System. It is converting thoughts to reality, where the young children (max 12 years of age) are being introduced to the world of technological innovation. ATL made to experience totally different microenvironments in Indian schools. This is allowing the children to work around their area of interest without having a fixed syllabus.
₹7,700.00₹8,500.00ATL Package 4 (DIY Tinkering and Safety Equipments)
₹7,700.00₹8,500.00
