-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹638.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹638.00(Price is Exclusive of GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹264.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹264.00 (Price is Exclusive of GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (Price is Exclusive of GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹207.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹207.00 (Price is Exclusive of GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)
- “SW-420 Vibration Sensor Module” already exists in your wishlist
-
18 Pin IC Base – DIP IC Socket Connector
- Product type: IC base
- Function: to easy insert, remove and reinsert the programmable chips and ICs in the PCD and neglect the component damage because of heat during soldering
- Number of pins: 18
- Package contains: 5 x 18 pin IC base.
₹5.00 (Price is Exclusive of GST)18 Pin IC Base – DIP IC Socket Connector
₹5.00 (Price is Exclusive of GST) -
₹5.00 (Price is Exclusive of GST)RGB 5mm Light Emitting Diode (Red, Blue, Green LED)
₹5.00 (Price is Exclusive of GST) -
270k Ohm Resistors, 1/4 Watt, 5% (Pack of 5)
Features-
Resistance: 270K Ohm,
Power Rating: 1/4Watt,
Approximate Maximum Current:Â 1.1mA
₹5.00₹10.00(Price is Exclusive of GST)270k Ohm Resistors, 1/4 Watt, 5% (Pack of 5)
₹5.00₹10.00(Price is Exclusive of GST) -
1K ohm Resistor (Pack of 5)
Features-
Resistance: 1K Ohm,
Power Rating: 8 Watt,
Tolerance: 5 %
₹5.00₹10.00(Price is Exclusive of GST)1K ohm Resistor (Pack of 5)
₹5.00₹10.00(Price is Exclusive of GST) -
220pF 1206 Surface Mount Multilayer Ceramic Capacitor– (pack of 5)
Features:
- Supplied in tape on reel
- Nickel-barrier end termination
- RoHS compliant
- Halogen Free compliant
₹5.00 (Price is Exclusive of GST)220pF 1206 Surface Mount Multilayer Ceramic Capacitor– (pack of 5)
₹5.00 (Price is Exclusive of GST) -
1uF (1000nF) 50V Capacitor 1206 SMD Package – (pack of 5)
Features:
- Supplied in tape on reel
- Nickel-barrier end termination
- RoHS compliant
- Halogen Free compliant
₹5.00 (Price is Exclusive of GST)1uF (1000nF) 50V Capacitor 1206 SMD Package – (pack of 5)
₹5.00 (Price is Exclusive of GST) -
2K ohm Metal Variable Resistor Preset – ELCON
- Part No: EP085-2K
- Manufacturer: ELCON
- Value: 2k ohm
- Rotation Angle: 230 Deg
₹5.00 (Price is Exclusive of GST)2K ohm Metal Variable Resistor Preset – ELCON
₹5.00 (Price is Exclusive of GST) -
PC817 SMD Transistor Output Optocoupler
- SMD Packaging.
- 10 to 20mA Collector current.
- 50mA Forward current.
- 6V Reverse voltage.
- 200mW Total power dissipation.
- Applications: Communications & Networking, Industrial.
₹5.00 (Price is Exclusive of GST)PC817 SMD Transistor Output Optocoupler
₹5.00 (Price is Exclusive of GST) -
₹5.00 (Price is Exclusive of GST)223 1KV Ceramic Capacitor
₹5.00 (Price is Exclusive of GST) -
33K 1KV Ceramic Capacitor
Important Considerations:-
Tolerance:
Capacitors have a tolerance rating, which specifies the acceptable variation from the stated capacitance value. For example, a 10% tolerance means the actual capacitance could be 10% higher or lower than 33,000 pF.Â
-
Dielectric:
The dielectric material (like ceramic) influences the capacitor’s characteristics, such as operating temperature range and voltage handling.Â
-
Physical Size:The physical size of the capacitor will vary depending on the specific type and manufacturer, but it will be larger than a lower voltage capacitor with the same capacitance due to the need to withstand higher voltages.Â
₹5.00 (Price is Exclusive of GST)33K 1KV Ceramic Capacitor
₹5.00 (Price is Exclusive of GST) -
-
22 1KV High Voltage Ceramic Disc Capacitor
- ±10% tolerance
- 1kV
- 22pF
₹5.00 (Price is Exclusive of GST)22 1KV High Voltage Ceramic Disc Capacitor
₹5.00 (Price is Exclusive of GST) -
47 1KV High Voltage Capacitor, Radial Lead
-
High-Voltage Circuits:
These capacitors are suitable for applications like power supplies, amplifiers, and voltage regulators where high voltages are present.Â
-
Snubber Circuits:
They can be used in snubber circuits for power supplies to protect other components from voltage spikes.Â
-
Filtering and Decoupling:They can also be used for filtering and decoupling high-frequency noise in various electronic circuits.Â
₹5.00 (Price is Exclusive of GST)47 1KV High Voltage Capacitor, Radial Lead
₹5.00 (Price is Exclusive of GST) -
