-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
- “1K ohm Resistor (Pack of 5)” already exists in your wishlist
-
Advanced Johnson/Mini Gear Motor L Clamp (Bracket)
Advanced Johnson/Mini Gear Motor L Clamp
- Material: Mild Steel
- Thickness: 1.5 mm
- Motor Mounting Hole: 3 mm
- Bracket Mounting Hole: 4 mm
- Weight: 34 gm
₹126.00 (excl. GST)Advanced Johnson/Mini Gear Motor L Clamp (Bracket)
₹126.00 (excl. GST) -
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
Features :
- Microstep resolutions:Â full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Adjustable current control lets you set the maximum current output with a potentiometer. Hence lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45Â V maximum supply voltage
- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3Â V and 5Â V systems
- Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
- Short-to-ground and shorted-load protection
- 4-layer, 2Â oz copper PCB for improved heat dissipation
- Exposed solderable ground pad below the driver IC on the bottom of the PCB
₹126.00 (excl. GST)DRV8825 Stepper Motor Driver with Aluminum Heat Sink
₹126.00 (excl. GST) -
XBee Shield V03 Module Wireless Control
Applications :
- PC via a USB cable directly connected with XBee adapters.
- Bluetooth Bee configures or uses as a data-transmission.
- Arduino board pro mini downloader.
Features :
- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
- 3.3v and 5v dual power output.
- 3.3v and 5v IO compatible.
- USB 2.0 protocol.
- Bitbang mode ready.
- Easily connected to a PC via mini USB Cable.
- XBee-setting support software X-CTU.
₹126.00 (excl. GST)XBee Shield V03 Module Wireless Control
₹126.00 (excl. GST) -
Mini DIY Walking Robot
Mini DIY Walking Robot
Kit contains:
1.motor
2.Battery
3.Dc clip
₹125.00 (excl. GST)Mini DIY Walking Robot
₹125.00 (excl. GST) -
4×4 Matrix 16 Keyboard Keypad
4×4 Matrix 16 Keyboard Keypad
- Easy communication with any microcontroller.
- Tactile type switches.
- Over 1,000,000 operations per key.
- Contact rated for 12V dc @ 20mA.
- Over 1,000,000 operations per key.
₹125.00 (excl. GST)4×4 Matrix 16 Keyboard Keypad
₹125.00 (excl. GST) -
SG90 Continuous Rotation 360 Degree Servo Motor
Features :Â
- High resolution
- Accurate positioning
- Fast control response
- Constant torque throughout the servo travel range
- Excellent holding power
₹125.00 (excl. GST)SG90 Continuous Rotation 360 Degree Servo Motor
₹125.00 (excl. GST) -
Aluminum GT2 20 Tooth Timing Pulley 6.35mm Bore For 6mm Belt
FEATURES-
- Material: Aluminum.
- No. of teeth: 20.
- Outer Diameter: 16mm.
- Inner Diameter: 6.35mm.
- Length: 14 mm.
- Weight: 6 gm.
₹125.00 (excl. GST)Aluminum GT2 20 Tooth Timing Pulley 6.35mm Bore For 6mm Belt
₹125.00 (excl. GST) -
Soldering Iron Temperature-280 to 450 Degree Celsius
Features :
- The workhorse of electronic industries. The highest and the most popular product.
- General purpose for all electronic applications.
- Attains full operating Temperature within a seconds.
- Slide on a Replaceable tip.
- Cool Grip Insulating Nylon Handle.
- High Quality Built Material.
- Hook provided to Hang.
- Portable, Lightweight and easy to use.
- With Durable heating element designed for long Life.
₹125.00 (excl. GST)Soldering Iron Temperature-280 to 450 Degree Celsius
₹125.00 (excl. GST) -
Raspberry Pi 3 Official ABS Case Box
The Raspberry Pi 3 Official Case for Raspberry Pi 3 Model B only Red/White is a 5-part Enclosure for Raspberry Pi 2 Model B and Raspberry Pi B+. Official case for the Raspberry Pi from the Raspberry Pi Foundation.This case has a very attractive strawberry red and white color. It is made up of ABS.
₹125.00 (excl. GST)Raspberry Pi 3 Official ABS Case Box
₹125.00 (excl. GST) -
Automatic Dawn to Dusk Sensor Board with Relay and LDR for Solar Based Street Light
Features:
LDR Based Sensor
On Board 12V Relay to Control Solar street Light
Relay will automatically turn ON in Low lighting Condition and will turn OFF when lighting is adequate
Pefect to control Solar based Garden light or Street light
Works best in open Natural Light Source₹125.00 (excl. GST) -
RF Wireless Transmitter Receiver Module (Red) – 433 MHz
Features:
- Transmitter Module employs a crystal-stabilized oscillator, ensuring accurate frequency control for best range performance
- Range in open space (Standard Conditions) : 100 Meters
- No requirement of external RF components except Antenna
- RX Supply Current: 3.5 mA. RX Typical Sensitivity: 105 Dbm
- Low Power Consumption
₹125.00 (excl. GST)RF Wireless Transmitter Receiver Module (Red) – 433 MHz
₹125.00 (excl. GST) -
MFRC-522 RC522 RFID Module
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- The low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Working current：13 – 26mA / DC 3.3V
- Standby current：10 – 13mA / DC 3.3V
- Sleep current：<80uA
- Peak current：<30mA
- Working frequency：13.56MHz
- Card reading distance ：0～60mm （Mifare1 card）
₹125.00 (excl. GST)MFRC-522 RC522 RFID Module
₹125.00 (excl. GST)
