-
Tensioner Torsion Spring for GT2 6MM Timing Belt-5Pcs
Features:
- Maintain optimal belt tension to ensure high-quality prints every time.
- it is compatible with 6mm GT2 timing belts.
- It will absorb belt vibration.
- It can be mounted on top of the belts and requires no removal.
₹80.00 (Price is Exclusive of GST)Tensioner Torsion Spring for GT2 6MM Timing Belt-5Pcs
₹80.00 (Price is Exclusive of GST) -
ELM327 OBD2 Bluetooth Interface Auto Car Scanner V1.5
Functions:
- Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
- Clear trouble codes and turn off the MIL (“Check Engine” light)
- Display current sensor data, including:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure.
Specifications and Features:
1. Works with all OBD-II compliant vehicles.2. Wireless (Bluetooth).3. Software included for Palm, PDA.4. Software included for Windows PC.5. Software included for Windows Smartphone.6. Supports ISO 9141, KWP2000.7. Supports SAE J1850.8. Supports CAN bus.10. Colour: White.₹647.60 (Price is Exclusive of GST)ELM327 OBD2 Bluetooth Interface Auto Car Scanner V1.5
₹647.60 (Price is Exclusive of GST) -
Waveshare 320×240 Resistive Touch LCD Display (2.8 Inch)
Features:
- Onboard touch controller, smoother touch experience than solutions that directly use AD pins for touching.
- SPI interface requires a few pins.
- Programmable backlight control, power saving.
- Comes with development resources and a manual (examples for STM32/AVR/PIC).
₹1,220.00 (Price is Exclusive of GST)Waveshare 320×240 Resistive Touch LCD Display (2.8 Inch)
₹1,220.00 (Price is Exclusive of GST) -
ORANGE 3296W Adjustable Potentiometer Kit- 50PCS
Features:
- Used in the fields of electronic products.
-
High precision mechanism design offers acute operation and long service life.
-
Compact and lightweight, easy to carry and dismantling.
₹670.00 (Price is Exclusive of GST)ORANGE 3296W Adjustable Potentiometer Kit- 50PCS
₹670.00 (Price is Exclusive of GST) -
Orange Quick Two-Port Butt Press Test CH-2 250V Connector Kit- 55PCS
Features:
- The shell is made from high standard flame retardant engineering plastic, practical and long service life
- With a good-quality steel clamp pin of good elasticity and good conductive copper core, connectors can serve their purpose well
- Fast wire connection operation without drilling screw holes speeds up the wiring process, quite convenient
- Connect the live wire to the part with l sign, and neutral wire to the part with n sign, the sign is clearly visible
- There are 55 quick connectors and you can replace joints and electrical taping with these connectors
- The connectors can be reused and stored in a plastic box provided.
₹330.00 (Price is Exclusive of GST)Orange Quick Two-Port Butt Press Test CH-2 250V Connector Kit- 55PCS
₹330.00 (Price is Exclusive of GST) -
ORANGE Small Car Blade Fuse Clippers Kit- 120PCS
Kit Includes:
12 x 2A Blade Fuse
12 x 3A Blade Fuse
12 x 5A Blade Fuse
12 x 7.5A Blade Fuse
12 x 10A Blade Fuse
12 x 15A Blade Fuse
12 x 20A Blade Fuse
12 x 25A Blade Fuse
12 x 30A Blade Fuse
12 x 35A Blade Fuse
₹365.00 (Price is Exclusive of GST)ORANGE Small Car Blade Fuse Clippers Kit- 120PCS
₹365.00 (Price is Exclusive of GST) -
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Features :
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
₹100.00 (Price is Exclusive of GST)CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
₹100.00 (Price is Exclusive of GST) -
STM32F401CCU6 Minimum System Board Microcomputer STM32 ARM Core Board
Features :
- 100% Brand new and high-quality STM32 Board
- 84 MHz work frequency.
- 256K flash memory,64K SRAM.
- 1.7-3.6V power, I/O.
- 4-26MHz crystal.
- Onboard the Type-C USB interface, you can give the board power supply and USB communication.
₹238.20 (Price is Exclusive of GST)STM32F401CCU6 Minimum System Board Microcomputer STM32 ARM Core Board
₹238.20 (Price is Exclusive of GST) -
Lemon Lithium Polymer Battery Pack 1800mAh 3S 45C/90C
Features:
- Guaranteed leak proof operation in any position except inverted
- The expected life span of two to three years in float service applications
- Operation in a broad range of ambient temperatures
- Recovery capabilities even after deep discharges
- Compact, quick and simple to install, require low maintenance
₹1,610.00 (Price is Exclusive of GST)Lemon Lithium Polymer Battery Pack 1800mAh 3S 45C/90C
₹1,610.00 (Price is Exclusive of GST) -
Creality Ender 3 V2 3D Printer
It’s the same old Ender-3 3D Printer experience, improved with current hardware that includes a 32-bit mainboard, silent stepper motor drivers, a much cleaner appearance and design, plus plenty of other, smaller, touches.
Features:
- Integrated Compact Design
- Multiple improved upgrades
- Ultra silent printing
₹17,170.00 (Price is Exclusive of GST)Creality Ender 3 V2 3D Printer
₹17,170.00 (Price is Exclusive of GST) -
Orange Lithium Polymer Battery Pack 3300mAh 2S 25C/50C (7.4V)
Safety Precautions :
- Avoid over-charging or over-discharging the batteries.
- Do n0t put it beside the high-temperature condition.
- Don’t throw it into the fire or Water
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹1,595.00 (Price is Exclusive of GST)Orange Lithium Polymer Battery Pack 3300mAh 2S 25C/50C (7.4V)
₹1,595.00 (Price is Exclusive of GST) -
Orange Lithium Polymer Battery Pack 1800mAh 3S 40C/80C (11.1V)
Precautions :
- Avoid over-charging or over-discharging the batteries.
- Do n0t put it beside the high-temperature condition.
- Don’t throw it into the fire or Water
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹1,345.00 (Price is Exclusive of GST)Orange Lithium Polymer Battery Pack 1800mAh 3S 40C/80C (11.1V)
₹1,345.00 (Price is Exclusive of GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
