-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
ISD1820 Sound/Voice Board Recording Module
Feature:
- Working voltage: 3 ~ 5V
- Board size:54 x 38 mm
- ISD1820 Sound/Voice Board Recording
- 100% Brand new and high-quality Board
- ISD1820 chip with an Onboard microphone.
₹135.00 (excl. GST)ISD1820 Sound/Voice Board Recording Module
₹135.00 (excl. GST) -
Jumper Wire Female to Female 20 cm (Set of 40 Piece)
Features :
Compatible with 2.54mm spacing pin headers
40pcs chromatic color jump wire
High quality and in good working condition
Durable and reusable
Easy to install and use
A popular choice for construction or repair
Be used for the electronic project and Genuine Arduino product
Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
₹45.00₹60.00(excl. GST)Jumper Wire Female to Female 20 cm (Set of 40 Piece)
₹45.00₹60.00(excl. GST) -
₹45.00
₹60.00(excl. GST)Jumper Wire Male to Female 20 cm (Set of 40 Piece)
₹45.00₹60.00(excl. GST) -
Jumper Wire Male to Male 20 cm (Set of 40 Piece)
40 pc male to male
- Each cable length about 20cm or 8-inch
- The male ends meant for insertion into standard 0.1 inch (2.54mm) female sockets and the female ends are meant for insertion onto standard 0.1 inch (2.54mm) male headers
- Suitable for Arduino breadboard kit project, PCB project, pc motherboard, etc
- Through the pin connection, without welding, fit for fast circuit test.
₹45.00₹60.00(excl. GST)Jumper Wire Male to Male 20 cm (Set of 40 Piece)
₹45.00₹60.00(excl. GST) -
Junior Hacksaw Blades – 12 inch
A pack of ten 150mm blades made from a strong but flexible carbon steel to ensure extra long life.
₹800.00 (excl. GST)Junior Hacksaw Blades – 12 inch
₹800.00 (excl. GST) -
Key Display For AVR, Boards compatible | New 8-Bit Digital LED Tube 8-Bit TM638 Module | Robotics Science Project
- It only need to read the relevant register to send display data or test button so it save mcu resources effectively., Package contents: 1 key display module for avr arduino
- 8 bits, 8 keys, 8 leds, 8 digital tubes, common cathode led digital tube
- The advantage is only three io ports will be occupied when it drives
- Scm doesn’t need to work for scaning display and key scaning
₹150.00 (excl. GST) -
KK2.1.5 Flight Controller Board-Multi-Rotor LCD
- MCU : Atmega644 PA
- Gyro/Acc: MPU6050
- Auto-level: Yes
- Input Voltage: 4.8-6.0V
- AVR interface: standard 6 pin.
- Signal from Receiver: 1520us (5 channels).
- Signal to ESC: 1520us.
₹3,500.00 (excl. GST)KK2.1.5 Flight Controller Board-Multi-Rotor LCD
₹3,500.00 (excl. GST) -
KP000 10mm Bore Inner Ball Mounted Pillow Block Insert Bearing
Features :
- Durable with high precision
- Can withstand great weight
- The angle between the inner bearing and the outer fixing ring is adjustable
- Easy to install
₹140.00 (excl. GST)KP000 10mm Bore Inner Ball Mounted Pillow Block Insert Bearing
₹140.00 (excl. GST) -
KP08 8mm Bore Inner Ball Mounted Pillow Block Insert Bearing
Features :
- Durable with high precision
- Can withstand great weight
- The angle between the inner bearing and the outer fixing ring is adjustable
- Easy to install
₹142.00 (excl. GST)KP08 8mm Bore Inner Ball Mounted Pillow Block Insert Bearing
₹142.00 (excl. GST) -
L clamp for Johnson Gear Motor Mounting
- Material: Mild Steel
- Thickness: 1.5 mm
- Motor Mounting Hole: 3 mm
- Bracket Mounting Hole: 3 mm
- Weight: 18 gm (each)
₹12.00 (excl. GST)L clamp for Johnson Gear Motor Mounting
₹12.00 (excl. GST) -
L293D Motor Driver Board
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
₹45.00 (excl. GST)L293D Motor Driver Board
₹45.00 (excl. GST) -
L293D Motor Driver IC
- Can be used to run Two DC motors with the same IC.
- 4 microcontroller pins
- Speed and Direction control is possible
- Motor voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(vss): 4.5V to 7V
₹30.00 (excl. GST)L293D Motor Driver IC
₹30.00 (excl. GST)
