No products in the cart.
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹390.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST)
5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (Lx W x H) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
- Fully Compatible with Raspberry Pi 3 and 4 Model B
- Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
₹750.00 (Price is Exclusive of GST)5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable
₹750.00 (Price is Exclusive of GST)12V 4 Channel Relay Module
1.Trigger Voltage(VDC):12
2.Trigger Current (MA):20
3.Switching Voltage (VAC):250@10A
4.Switching Voltage (VDC):30@10A
5.Operating Temperature (°C):-40 to 85
6.Opt. Relative Humidity(RH):20% ～ 85%
7.Storage condition (℃):-65 to 125
₹115.00 (Price is Exclusive of GST)12V 4 Channel Relay Module
₹115.00 (Price is Exclusive of GST)470 Ohm Carbon Film Resistor- Pack of 50 pcs
- Resistance Value: 470 Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 470 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors
₹50.00 (Price is Exclusive of GST)470 Ohm Carbon Film Resistor- Pack of 50 pcs
₹50.00 (Price is Exclusive of GST)Pro- Range 11.1V 5200mAh 45C 3S Hardcase Lithium Polymer Battery Pack
- Product: Pro- Range Hard-case Li-Po Battery
- Cell: 3S
- Capacity (mAh): 5200mAh
- Output Voltage (VDC): 11.1V
- Discharge Plug: Female T-connector
- Max. Charge Rate: 45C
₹3,771.00 (Price is Exclusive of GST)Pro- Range 11.1V 5200mAh 45C 3S Hardcase Lithium Polymer Battery Pack
₹3,771.00 (Price is Exclusive of GST)- ₹550.00 (Price is Exclusive of GST)
Lithion Power DC-DC Converter 48V-12V current 15A
₹550.00 (Price is Exclusive of GST) Lithion Power Bms(Battery Management System) semi smart S16-40A-NMC/LFP
PRODUCT CATEGORY: BATTERY MANAGEMENT SYSTEM
₹1,404.00 (Price is Exclusive of GST)Lithion Power Bms(Battery Management System) semi smart S16-40A-NMC/LFP
₹1,404.00 (Price is Exclusive of GST)Lithion Power Bms(Battery Management System) semi smart S13-40A-NMC/LFP
Product Category: BATTERY MANAGEMENT SYSTEM
₹1,404.00 (Price is Exclusive of GST)Lithion Power Bms(Battery Management System) semi smart S13-40A-NMC/LFP
₹1,404.00 (Price is Exclusive of GST)Bonka 14.8V 1300mAh 95C 4S Graphene Lithium Polymer Battery Pack
- Voltage(V): 14.8
- Configuration: 4S
- Capacity (mAh): 1300
- Discharge Rate: 95C
₹2,280.00 (Price is Exclusive of GST)Bonka 14.8V 1300mAh 95C 4S Graphene Lithium Polymer Battery Pack
₹2,280.00 (Price is Exclusive of GST)Bonka 14.8V 1500mAh 95C 4S Graphene Lithium Polymer Battery Pack
- Voltage(V): 14.8
- Configuration: 4S
- Capacity (mAh): 1500
- Discharge Rate: 95C
₹2,937.00 (Price is Exclusive of GST)Bonka 14.8V 1500mAh 95C 4S Graphene Lithium Polymer Battery Pack
₹2,937.00 (Price is Exclusive of GST)Orange 14.8V 1300mAh 100C 4S Graphene Lithium Polymer Battery Pack
- Model No: ORANGE 1300/4S-100C
- Capacity: 1300 mAh.
- Weight: 175 gm.
- Voltage: 15.2 VDC.
- Dimensions : 73 x 34 x 34(LxHxW)(mm ).
- Max Continuous Discharge : 100 C(150 A).
- Balance Plug: JST-XH.
- Discharge Plug: XT-60
₹2,806.00 (Price is Exclusive of GST)Orange 14.8V 1300mAh 100C 4S Graphene Lithium Polymer Battery Pack
₹2,806.00 (Price is Exclusive of GST)Orange 14.8V 1500mAh 100C 4S Graphene Lithium Polymer Battery Pack
- Model No: ORANGE 1500 / 4S-100C
- Capacity: 1500 mAh.
- Weight: 195 gm.
- Voltage: 15.2 VDC.
- Discharge Plug: XT-60
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹2,982.00 (Price is Exclusive of GST)Orange 14.8V 1500mAh 100C 4S Graphene Lithium Polymer Battery Pack
₹2,982.00 (Price is Exclusive of GST)GanFeng 3.2V 100Ah LiFePO4 Lithium Prismatic Battery Cell
- Model: Prismatic LiFePO4
- Nominal Voltage: 3.2V
- Nominal Capacity: 100Ah (100,000mAh)
- Charge Voltage: 3.65V
- Discharge Cutoff Voltage: 2.5V
- Cycle Life: >4,000 cycles (80% DOD)
- Max Charge Current: 1C (100A)
₹2,630.00 (Price is Exclusive of GST)GanFeng 3.2V 100Ah LiFePO4 Lithium Prismatic Battery Cell
₹2,630.00 (Price is Exclusive of GST)
