-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
- “1K ohm Resistor (Pack of 5)” already exists in your wishlist
-
Metal Potentiometer 10k Volumable (Pack of 5)
- Resistance: 10k Ω.
- Tolerance: 20%.
- Shaft Length: 15mm
Potentiometers are very useful in changing the electrical parameters of a system. It is a single turn 10k Potentiometer with a rotating knob. These potentiometers are also commonly called as a rotary potentiometer or just POT in short.
₹90.00₹100.00(excl. GST)Metal Potentiometer 10k Volumable (Pack of 5)
₹90.00₹100.00(excl. GST) -
MPR121 Touch Sensor Controller Module
- Connection Interface: I2C.
- Operating Voltage: 2.5-3.6 VDC
- Â Application: Capacitive Touch Sensor Controller
- Number of touch inputs:12
- Material: Alloy+Plastic
₹90.00 (excl. GST)MPR121 Touch Sensor Controller Module
₹90.00 (excl. GST) -
Power Adaptor Dual Pin 5 Volt 1 Amps
- Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz.
- Input current (mA): 100.
- Output Power: 5V 2A
- Load regulation (%): ±5.
- Input Plug: 2-Pin EU type.
- Output Plug: 2 in 1 dual DC Jack (5.5mm + 4mm).
₹90.00 (excl. GST)Power Adaptor Dual Pin 5 Volt 1 Amps
₹90.00 (excl. GST) -
Power Adaptor Dual Pin 12 Volt 1 Amps
- Stabilized Output, low ripple & low interference Ideal for CCTV Cameras / Routers / Modems / Cordless Phones / Set Top Boxes / Wireless Devices / POS Machines etc.
- Plug Type – 2 Pin
- 5.5mm DC Pin & 4.00mm Pin Combo
- Power supply for LED, SMD, LED strip, RGB LED strip
- Color as show on picture. Package includes 1 item.
₹90.00 (excl. GST)Power Adaptor Dual Pin 12 Volt 1 Amps
₹90.00 (excl. GST) -
9 Volt Power Adaptor Single Pin 1 Amps
- Material: Plastic
- Colour: Black
- Dimensions (L x B x H): 6.5 cm x 3.5 cm x 10 cm
- Weight: 120 g
- Warranty: 6 Months Seller Warranty on Manufacturing Defects
- Care Instructions: Check specifications before use
₹90.00 (excl. GST)9 Volt Power Adaptor Single Pin 1 Amps
₹90.00 (excl. GST) -
Power Adaptor Dual Pin 9 Volt 1 Amps
- AC Input Voltage: 100 ~ 240 V.
- Output Voltage(V): 9.
- Output Current (Amp): 1.
- Rated Frequency (Hz): 50 – 60.
- Cable Length: Approx 1.1m
₹90.00 (excl. GST)Power Adaptor Dual Pin 9 Volt 1 Amps
₹90.00 (excl. GST) -
L298N 2A Current Motor Driver Board
- Lo Logical voltage:Â 5V
- Drive voltage: 5V-35V
- Logical current:Â 0-36mA
- Drive current: 2A (max. single bridge)
- Max power:Â 25W
- Dimensions:Â 44 x 44 x 28 (LxWxH)mm
- Weight:Â 26 gm
₹90.00₹99.00(excl. GST)L298N 2A Current Motor Driver Board
₹90.00₹99.00(excl. GST) -
16×2 Yellow or Green Backlight Alphanumeric Character LCD Display
- 16×2 LCD display Green LED Backlight
- The contrast of the screen can also be controlled by varying the voltage at the contrast control pin
- It is easy to interface with most micro controllers
₹90.00 (excl. GST)16×2 Yellow or Green Backlight Alphanumeric Character LCD Display
₹90.00 (excl. GST) -
HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module
- Wide operating voltage range: the default operating voltage DC4.5V-20V.
- Automatic induction: to enter the sensing range of the output is high, people leave the sensor range automatically delay off high, output low. Ultra-small size.
₹89.00 (excl. GST)HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module
₹89.00 (excl. GST) -
MQ9 Gas Carbon Monoxide, Methane and LPG Gas Sensor Module
- Good sensitivity to CO/Combustible Gas
- High sensitivity to Methane, Propane, and CO
- Long life and low cost
- Simple drive circuit
- Input voltage: DC 5±0.2V
- Current Consumption: 150mA
₹88.00 (excl. GST)MQ9 Gas Carbon Monoxide, Methane and LPG Gas Sensor Module
₹88.00 (excl. GST) -
MQ7 Carbon Monoxide Gas Sensor Module
- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
₹88.00 (excl. GST)MQ7 Carbon Monoxide Gas Sensor Module
₹88.00 (excl. GST) -
MQ6 Liquified Petroleum Isobutane Propane Gas Sensor module
- Operating Voltage: 5V DC
- Indication of the signal output
- Dual signal output (analog output, and TTL level output)
- 0 ~ 5V analog output voltage, the higher the concentration, the higher the voltage
- High sensitivity to hydrogen
- Can be resistant to ethanol steam, LPG (petroleum), smoke interference
- Has a long life and reliable stability
- Fast response and recovery characteristicsApplications of MQ6 LPG Gas Sensor Module:-
- Gas leak detection system
- Fire/Safety detection system
- Domestic gas leakage detector
- Industrial Combustible gas detector
- Portable gas detector
- Gas leak alarm
- Gas detector
₹88.00 (excl. GST)MQ6 Liquified Petroleum Isobutane Propane Gas Sensor module
₹88.00 (excl. GST)
