-
18650 Battery Holder/Development Board Compatible With Raspberry Pi3B/3B+
Features:
- I2C Battery Monitoring
- Built-in Li-ion Battery Charging
- Can Supply up to 6A Output Current
- Supports Charging Current of 1A
₹160.00₹180.00(Price is Exclusive of GST)18650 Battery Holder/Development Board Compatible With Raspberry Pi3B/3B+
₹160.00₹180.00(Price is Exclusive of GST) -
Portable Resistor LED Potentiometer Kit for UNO R3
- 1 sets Handy Portable Resistor Kit for Arduino Starter Kit UNO R3 LED potentiometer tact switch pin header
- High Quality kit for arduino
₹160.00 (Price is Exclusive of GST)Portable Resistor LED Potentiometer Kit for UNO R3
₹160.00 (Price is Exclusive of GST) -
12mm Square Flange Bushing Linear Bearing LMK12LUU
Features :
- Smooth moving
- Low friction
- High rigid
- Long life
- Economical and easy to maintain.
₹161.00 (Price is Exclusive of GST)12mm Square Flange Bushing Linear Bearing LMK12LUU
₹161.00 (Price is Exclusive of GST) -
Hi-Link Switch Power Supply Module (HLK PM01 5V/3W)
Hi-Link Switch Power Supply Module
Environmental conditions:
- Technical indicators: Single bit
- Working temperature: – 20-60 +degree
- Storage temperature: + 80-40 -degree
- Relative humidity: 5-95%
- The cooling way: Natural cooling
- The atmospheric pressure: 80-106Kpa
- The altitude: 2000M or less.
₹161.00 (Price is Exclusive of GST)Hi-Link Switch Power Supply Module (HLK PM01 5V/3W)
₹161.00 (Price is Exclusive of GST) -
801S Vibration Shock Sensor Module
- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
₹163.00 (Price is Exclusive of GST)801S Vibration Shock Sensor Module
₹163.00 (Price is Exclusive of GST) -
Orange ICR18650-22F 3.7V 2200mAh 2C Li-ion Battery
- Model No.: ICR18650-22F
- Capacity (mAh): 2200
- Output Voltage: 3.7V
- Charge Rate: 2C
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
₹164.00 (Price is Exclusive of GST)Orange ICR18650-22F 3.7V 2200mAh 2C Li-ion Battery
₹164.00 (Price is Exclusive of GST) -
0.96 Inch I2C/IIC 4pin OLED Display Module BLUE
Features of 4 pin 128 x 64 OLED Display
- Super High Brightness (Adjustable)
- Super High Contrast (Adjustable)
- Embedded Driver/Controller
- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- working voltage: 3.3V
- Control Chip: SSD1306
₹165.00 (Price is Exclusive of GST)0.96 Inch I2C/IIC 4pin OLED Display Module BLUE
₹165.00 (Price is Exclusive of GST) -
Roofer A Grade INR18650-2200A 3.7V 2200mAh 1C Li-ion Battery
- Model No.: INR 18650 2200
- Capacity (mAh): 2200
- Output Voltage: 3.7V
- Charge Rate: 1C
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
₹165.00 (Price is Exclusive of GST)Roofer A Grade INR18650-2200A 3.7V 2200mAh 1C Li-ion Battery
₹165.00 (Price is Exclusive of GST) -
Orange A Grade ISR 18650 3.7V 2000mAh 10C Li-ion Battery
- Model No.: ISR18650-2000
- Capacity (mAh): 2000
- Output Voltage: 3.7V
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
₹166.00 (Price is Exclusive of GST)Orange A Grade ISR 18650 3.7V 2000mAh 10C Li-ion Battery
₹166.00 (Price is Exclusive of GST) -
CJMCU-34725 TCS34725 Color Sensor RGB Module
- Operating Voltage: 3.3V
- Supply Voltage: 3.3V-5V
- The TCS3472 device provides digital return values for red, green, blue (RGB) and bright light sensing
- Color management is more accurate.
- The high sensitivity.
- Wide dynamic range.
- IR shading filters make the TCS3472 ideal.
₹168.00 (Price is Exclusive of GST)CJMCU-34725 TCS34725 Color Sensor RGB Module
₹168.00 (Price is Exclusive of GST) -
N30 High Magnetic Motor with Propeller (Set of 2)
- Axis diameter:1mm
- Axis length:8mm
- Electrical size:20*10*12mm
₹170.00 (Price is Exclusive of GST)N30 High Magnetic Motor with Propeller (Set of 2)
₹170.00 (Price is Exclusive of GST) -
Arduino Nano V3
- Operating Voltage (logic level): 5V
- With USB cable and Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
₹170.00 (Price is Exclusive of GST)Arduino Nano V3
₹170.00 (Price is Exclusive of GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
