No products in the cart.
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹390.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)
Radial Ball Bearing 625ZZ for 3D Printer/ Robot – 4Pcs
It’s needed for most types of RepRap 3D printers. Our bearings come pre-lubricated from the manufacturer so that no additional lubrication is required to be applied. These protect the bearing from dust or any possible corrosion.
The SKF Premium quality, Versatile, and robust Deep Groove Ball Bearings are the most common bearing type found in a wide variety of applications. ZZ is equal to double metal shields one metal shield mounted on each side of the bearings and the bearings are lubricated for ensuring longer life.
₹110.00 (Price is Exclusive of GST)Radial Ball Bearing 625ZZ for 3D Printer/ Robot – 4Pcs
₹110.00 (Price is Exclusive of GST)684 ZZ Bearing 4x9x4 Shielded Miniature Ball Bearings-4Pcs
The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan.
Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
Each bearing has a HIGH load carrying capacity, which is around 250 kg to 500 kg.
- Inner Diameter (ID): 4 mm
- Outer Diameter (OD): 9 mm
- Width (mm): 4
₹130.00 (Price is Exclusive of GST)684 ZZ Bearing 4x9x4 Shielded Miniature Ball Bearings-4Pcs
₹130.00 (Price is Exclusive of GST)KP000 10mm Bore Inner Ball Mounted Pillow Block Insert Bearing
Features :
- Durable with high precision
- Can withstand great weight
- The angle between the inner bearing and the outer fixing ring is adjustable
- Easy to install
₹140.00 (Price is Exclusive of GST)KP000 10mm Bore Inner Ball Mounted Pillow Block Insert Bearing
₹140.00 (Price is Exclusive of GST)KP08 8mm Bore Inner Ball Mounted Pillow Block Insert Bearing
Features :
- Durable with high precision
- Can withstand great weight
- The angle between the inner bearing and the outer fixing ring is adjustable
- Easy to install
₹142.00 (Price is Exclusive of GST)KP08 8mm Bore Inner Ball Mounted Pillow Block Insert Bearing
₹142.00 (Price is Exclusive of GST)GT2 Timing Idler Pulley 20 Tooth For 6mm Belt 20 Tooth 5mm Bore-2Pcs
For precise motion control, GT2 belts and pulleys offer excellent precision at a great price. This pulley is meant for use with GT2 6mm wide belts only – MXL belts will slip due to the different tooth profiles.
Features:
- Adopting high-quality Aluminum Alloy material，sturdy and durable
- Adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively
₹216.00 (Price is Exclusive of GST)GT2 Timing Idler Pulley 20 Tooth For 6mm Belt 20 Tooth 5mm Bore-2Pcs
₹216.00 (Price is Exclusive of GST)GT2 Close-Loop Rubber Timing Belt for 3D Printer
Features:
- Type: Closed Loop
- Length: 158 mm
- Width: 6mm
- Good quality and durable low noise
₹75.00 (Price is Exclusive of GST)GT2 Close-Loop Rubber Timing Belt for 3D Printer
₹75.00 (Price is Exclusive of GST)Tensioner Torsion Spring for GT2 6MM Timing Belt-5Pcs
Features:
- Maintain optimal belt tension to ensure high-quality prints every time.
- it is compatible with 6mm GT2 timing belts.
- It will absorb belt vibration.
- It can be mounted on top of the belts and requires no removal.
₹80.00 (Price is Exclusive of GST)Tensioner Torsion Spring for GT2 6MM Timing Belt-5Pcs
₹80.00 (Price is Exclusive of GST)GT2 Aluminium Timing Pulley 60 teeth 5mm Bore
GT2 toothed pulley with 2mm pitch teeth, suitable for use with GT2 neoprene reinforced nylon or steel reinforced polyurethane belts to be chosen depending on the type of end use. Made entirely of aluminium.
Such a pulley reduces backwash due to accelerations and directional changes, ensuring good resolution when used on automatic system such as 3D printer and small CNC systems.
Features:
- High Quality Aluminium
- Excellently Machined
- Durable and practical
- Minimizes the chance of the belt slipping
- Easy to use
₹205.00 (Price is Exclusive of GST)GT2 Aluminium Timing Pulley 60 teeth 5mm Bore
₹205.00 (Price is Exclusive of GST)Aluminum GT2 Timing Pulley 40 Tooth 5mm Bore For 6mm Belt
This pulley has 40 teeth and a 5mm inner bore. Two set screws can be used to attach it firmly to any 5mm diameter shaft. Full aluminum construction means these are very light and very durable.
Specifications-
- Material: Aluminum.
- No. of teeth: 40.
- Outer Diameter: 27 mm.
- Inner Bore Diameter: 5mm.
₹156.00 (Price is Exclusive of GST)Aluminum GT2 Timing Pulley 40 Tooth 5mm Bore For 6mm Belt
₹156.00 (Price is Exclusive of GST)PowerMax Dual Channel Brushed ESC Motor Controller with EBD – 60A
- PowerMax Series Brushed Motor Controllers are dual channel motor controllers capable of driving 2 brushed DC motors.
- Signal-loss failsafe
- Synchronous rectification,
- Rregenerative braking, and an
- Isolated heat sink plate.
- The Powermax series can be used with any standard RC signals.
- Best option for Robowar Use.
₹4,900.00₹6,500.00(Price is Exclusive of GST)PowerMax Dual Channel Brushed ESC Motor Controller with EBD – 60A
₹4,900.00₹6,500.00(Price is Exclusive of GST)PowerMax Dual Channel Brushed ESC Motor Controller with EBD – 20A
- PowerMax Series Brushed Motor Controllers are dual channel motor controllers capable of driving 2 brushed DC motors.
- Signal-loss failsafe
- Synchronous rectification,
- Rregenerative braking, and an
- Isolated heat sink plate.
- The Powermax series can be used with any standard RC signals.
- Best option for Robowar Use.
₹2,700.00₹3,500.00(Price is Exclusive of GST)PowerMax Dual Channel Brushed ESC Motor Controller with EBD – 20A
₹2,700.00₹3,500.00(Price is Exclusive of GST)ELM327 OBD2 Bluetooth Interface Auto Car Scanner V1.5
Functions:
- Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
- Clear trouble codes and turn off the MIL (“Check Engine” light)
- Display current sensor data, including:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure.
Specifications and Features:
1. Works with all OBD-II compliant vehicles.2. Wireless (Bluetooth).3. Software included for Palm, PDA.4. Software included for Windows PC.5. Software included for Windows Smartphone.6. Supports ISO 9141, KWP2000.7. Supports SAE J1850.8. Supports CAN bus.10. Colour: White.₹580.00 (Price is Exclusive of GST)ELM327 OBD2 Bluetooth Interface Auto Car Scanner V1.5
₹580.00 (Price is Exclusive of GST)
