No products in the cart.
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹390.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)
Readytosky 80A ESC 2-6S Brushless ESC Speed Controller for RC Drone
Features:
- Security power function: When the power is turned on, regardless of the throttle stick at any position will not start the motor immediately to prevent personal injury
- Throttle range calibrated function: to adapt the throttle differences between different strokes, improve the linearity of throttle response
- programmed project (available throttle stick or card LED parameter settings):
- Brake setting: No brake / with brake
- Battery Type: Lithium battery / NiMH
- Low Voltage Protection Mode: Soft Shutdown / hard off
- Low Voltage Protection Threshold: low / medium / high
- start mode: Normal / Soft / Super-soft and start
- Timing: low / medium / high
- Restore factory defaults
- Comprehensive protection features:
- Under-voltage protection: the program set by the user when the battery voltage is below the protection threshold, ESC automatically reduces the output power
- Overvoltage Protection: input voltage exceeds the input range are not allowed to start, automatic protection, also issued a hasty “beep” Warning
- Overheat protection: built-in temperature detection circuit that automatically reduces the output power ESC temperature is too high
- Remote signal loss protection: remote control signal is lost for 1 second to reduce the power, and then have two seconds to turn off without the remote control signal output
₹1,866.00 (Price is Exclusive of GST)Readytosky 80A ESC 2-6S Brushless ESC Speed Controller for RC Drone
₹1,866.00 (Price is Exclusive of GST)Solderless 400 pin breadboard – Normal Quality – Without Packing
Specifications and features:
- 400 tie points
- 1 Double strip, Total 300 tie points
- 2 Power lanes, Total 100 tie points in power lanes
- Perfect for Arduino shield prototyping and testing
- Plastic housing, metal contact clips
₹38.00₹58.00(Price is Exclusive of GST)Solderless 400 pin breadboard – Normal Quality – Without Packing
₹38.00₹58.00(Price is Exclusive of GST)GL-12 840 Points Solderless Breadboard
Features:
- 100% brand new and high quality
- Practical and useful
- Solderless breadboard with 840 points
- Completely reusable and have a self-adhesive back
- Easy component placement
₹50.00 (Price is Exclusive of GST)GL-12 840 Points Solderless Breadboard
₹50.00 (Price is Exclusive of GST)Orange 12V 20 RPM Johnson Geared DC Motor Grade A Quality Encoder Compatible
Features :
- Grade A Quality branded Johnson DC Motor.
- It has sturdy construction.
- Shaft equips metal bushes for long life.
- It comes with High-Quality gears.
- The shaft has a hole for better coupling.
₹400.00 (Price is Exclusive of GST)Orange 12V 20 RPM Johnson Geared DC Motor Grade A Quality Encoder Compatible
₹400.00 (Price is Exclusive of GST)Orange 12V 300 RPM Johnson Geared DC Motor – Grade A Quality-Encoder Compatible
Features :
- Grade A Quality branded Johnson DC Motor.
- It has a sturdy construction.
- Comes with a Rear shaft for encoder mounting
- Shaft equips metal bushes for long life.
- It comes with High-Quality gears.
- The shaft has a hole for better coupling.
₹335.00 (Price is Exclusive of GST)Orange 12V 300 RPM Johnson Geared DC Motor – Grade A Quality-Encoder Compatible
₹335.00 (Price is Exclusive of GST)TB6600 Stepper Motor Driver Controller
Features :
- H bridge bipolar constant current drive.
- The biggest 4.0 A Eight kinds of output current are optional.
- The biggest 32 To subdivide 6 kinds of subdivision modes selectable.
- Input signal high-speed photoelectric isolation.
- A total of standard single pulse interface.
- Offline retention function.
- The semi-enclosed casing can adapt to a more stringent environment.
- Provide energy saving half automatic current lock function.
₹300.00 (Price is Exclusive of GST)TB6600 Stepper Motor Driver Controller
₹300.00 (Price is Exclusive of GST)Leadshine DM542 Digital Stepper Motor Driver
Features:
- Extremely cost-effective
- Good high-speed performance
- Automatic idle-current reduction
- 3-state current control technology
- Self-adjustment technology
- Pure-sinusoidal current control technology
- TTL compatible and optically isolated input
- 15 selectable resolutions in decimal and binary, up to 25,600 steps/rev
- Suitable for 2-phase and 4-phase motors
- DIP switch current setting with 8 different values
- Support PUL/DIR and CW/CCW modes
- Short-voltage, over-voltage, over-current protection
₹2,536.00 (Price is Exclusive of GST)Leadshine DM542 Digital Stepper Motor Driver
₹2,536.00 (Price is Exclusive of GST)12mm Square Flange Bushing Linear Bearing LMK12LUU
Features :
- Smooth moving
- Low friction
- High rigid
- Long life
- Economical and easy to maintain.
₹206.00 (Price is Exclusive of GST)12mm Square Flange Bushing Linear Bearing LMK12LUU
₹206.00 (Price is Exclusive of GST)NEEMA 17-JK42HS48-1684-0.44N-m D Type 5.5Kg
Features :
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
₹825.00 (Price is Exclusive of GST)NEEMA 17-JK42HS48-1684-0.44N-m D Type 5.5Kg
₹825.00 (Price is Exclusive of GST)NEEMA 23-JK57HS51-2804-10.1kg-cm Round Type
Features :
- Comparably more powerful than NEMA17 motors.
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
₹1,096.00 (Price is Exclusive of GST)NEEMA 23-JK57HS51-2804-10.1kg-cm Round Type
₹1,096.00 (Price is Exclusive of GST)NEEMA 23-JK57HS76-2804-1.89N m Stepper Motor – Round Type Shaft
Features :
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
₹1,430.00 (Price is Exclusive of GST)NEEMA 23-JK57HS76-2804-1.89N m Stepper Motor – Round Type Shaft
₹1,430.00 (Price is Exclusive of GST)
