-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
SPDT ON-Off 3 Pin 2 Position Slide Switch 0.3A
- This is a mountable SPDTÂ switch great for use as a general control switch. The pins are spaced by 3.7mm (0.14″).
- This switch has two handy 2mm mounting holes on each side of the actuator, making it easy to install while providing a discreet slide switch for your next project.
- It is rated for 300mA at 125VAC
₹4.00 (excl. GST)SPDT ON-Off 3 Pin 2 Position Slide Switch 0.3A
₹4.00 (excl. GST) -
₹9.00 (excl. GST)Plastic Metal SPST 3 Pin 2 Way Toggle Switch 3A/5A AC 250V/125V
₹9.00 (excl. GST) -
WeMos d1 Mini pro – 16m Bytes External Antenna Connector esp8266 WiFi iot Board
- This is WEMOS D1 pro,it is a based on ESP-8266.
- New CP2104 USB-TO-UART IC.
- WIFI development board, 16M Bytes.
- Built-in ceramic antenna or external antenna.
- Same size as D1 mini, but more light.
₹665.00 (excl. GST)WeMos d1 Mini pro – 16m Bytes External Antenna Connector esp8266 WiFi iot Board
₹665.00 (excl. GST) -
D1R2SH Wemos D1 R2 WIFI ESP8266 Shield
- Voltage: 5v(maximum input voltage 24v). Current: 1a
- Input range: 0-3. 3V
- Support ota wireless upload
₹350.00 (excl. GST)D1R2SH Wemos D1 R2 WIFI ESP8266 Shield
₹350.00 (excl. GST) -
Optical Fingerprint Reader R307 Sensor Module
- Integrated image collecting and algorithm chip together, ALL-in-One
- Low power consumption, small size, excellent performance. Please be informed that the product required prior knowledge regarding the usage.
- Good image processing capabilities can successfully capture an image up to resolution 500 dpi.
- Fingerprint reader can conduct secondary development, can be embedded into a variety of end products
- Professional optical technology, precise module manufacturing techniques.
₹950.00₹1,050.00(excl. GST)Optical Fingerprint Reader R307 Sensor Module
₹950.00₹1,050.00(excl. GST) -
11.1V 5400mAH LiPo Battery
- This is a 11.1V LiPo battery pack with a capacity of 5400mAh.
- It produces a maximum charging rate of 5C and maximum discharging rate of 40C.
- Experts recommend to maintain a charging rate of 1-3C for the5400mAh LiPo battery.
- Suitable for most RC models such as remote control racing drone, helicopter, car, boat, etc.
- Compatible with balance charger. Package Included : 1 x 5400mah lipo Battery
₹4,000.00 (excl. GST)11.1V 5400mAH LiPo Battery
₹4,000.00 (excl. GST) -
TC-50 5V 2Amp Super Fast Charger with 1 Meter USB Cable
- Colour- White
- Compatible with any Android phone
- Connector GenderFemale-to-Male
₹300.00₹325.00(excl. GST)TC-50 5V 2Amp Super Fast Charger with 1 Meter USB Cable
₹300.00₹325.00(excl. GST) -
Temperature Humidity Time Display Meter with Clock – Hygrometer Thermometer Sensor
- Temperature Humidity Display Meter
- Wireless outdoor and indoor temperature (Fahrenheit or Celsius)
- Measures temperature and humidity level
- 1 x HTC (main unit) and 1 x AAA 1.5v Battery
- Includes clock, day, date and alarm function
- Provides for flip out bracket for free standing or wall fixing
₹300.00 (excl. GST) -
3D Pen Professional for 3D Printing Drawing Pen with 3 x 1.75mm ABS/PLA Filament
- The 3D printing pen has an ergonomic design that makes it comfortable for users.
- The 3D pen is a perfect gift for kids because it is safe and eco-friendly.
- The 3D pen for professionals is compatible with both 1.75mm ABS & PLA Filament.
- It features a Fast boot setup in just 30 seconds. You can draw and create quickly.
- This 3D printing pen is perfect for working professionals like architects, designers and model makers.
₹890.00 (excl. GST)3D Pen Professional for 3D Printing Drawing Pen with 3 x 1.75mm ABS/PLA Filament
₹890.00 (excl. GST) -
2.4″ Inch Touch Screen TFT Display Shield
- 2.4″ Touch LCD TFT display module for Arduino
- 240*320 pixels resolution
- Ability to display 262000 different colors
- The shield comes equipped with a microSD card slot.
- SPFD5408 controller with built-in video RAM buffer
₹500.00 (excl. GST)2.4″ Inch Touch Screen TFT Display Shield
₹500.00 (excl. GST) -
Breadboard-MB102 830 Points Bread Board/Solderless Pcb Circuit Test Board, White
- No soldering required
- Circuit electronics DIY
- Fit for jumper wire of 0. 8Mm diameter standard 2. 54Mm hole spacing
- Reusable for fast build a prototype of an electronic circuit will accept transistors, diodes, leds, resistors, capacitors and virtually all types of components
₹65.00 (excl. GST) -
3 in 1 Soil Tester Meter for Garden Lawn Plant Pot for Moisture, Light Meter, PH Sensor Tool Three-in-one Round Soil Tester
- 3 in 1 Soil Tester Meter
- Easy to use: no battery needed, plug and read.
- Scientifically accurate: keep your plants in a healthy range.
- Simply insert the probes into the soil, and you’ll get your reading.
₹450.00 (excl. GST)
