- “eSun PLA+ 1.75mm 3D Printing Filament 1kg-Red” already exists in your wishlist
-
Roofer A Grade INR18650-2200A 3.7V 2200mAh 1C Li-ion Battery
- Model No.: INR 18650 2200
- Capacity (mAh): 2200
- Output Voltage: 3.7V
- Charge Rate: 1C
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
₹165.00 (Price is Exclusive of GST)Roofer A Grade INR18650-2200A 3.7V 2200mAh 1C Li-ion Battery
₹165.00 (Price is Exclusive of GST) -
Orange A Grade ISR 18650 3.7V 2000mAh 10C Li-ion Battery
- Model No.: ISR18650-2000
- Capacity (mAh): 2000
- Output Voltage: 3.7V
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
₹166.00 (Price is Exclusive of GST)Orange A Grade ISR 18650 3.7V 2000mAh 10C Li-ion Battery
₹166.00 (Price is Exclusive of GST) -
CJMCU-34725 TCS34725 Color Sensor RGB Module
- Operating Voltage: 3.3V
- Supply Voltage: 3.3V-5V
- The TCS3472 device provides digital return values for red, green, blue (RGB) and bright light sensing
- Color management is more accurate.
- The high sensitivity.
- Wide dynamic range.
- IR shading filters make the TCS3472 ideal.
₹168.00 (Price is Exclusive of GST)CJMCU-34725 TCS34725 Color Sensor RGB Module
₹168.00 (Price is Exclusive of GST) -
N30 High Magnetic Motor with Propeller (Set of 2)
- Axis diameter:1mm
- Axis length:8mm
- Electrical size:20*10*12mm
₹170.00 (Price is Exclusive of GST)N30 High Magnetic Motor with Propeller (Set of 2)
₹170.00 (Price is Exclusive of GST) -
Arduino Nano V3
- Operating Voltage (logic level): 5V
- With USB cable and Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
₹170.00 (Price is Exclusive of GST)Arduino Nano V3
₹170.00 (Price is Exclusive of GST) -
EasyMech Bracket For NEMA23 Stepper Motor – Straight
Features :
- Most accurate design for NEMA23 Stepper Motor
- Made from High-Quality MS.
- Equips extra holes for user-defined motor fitting.
₹170.00 (Price is Exclusive of GST)EasyMech Bracket For NEMA23 Stepper Motor – Straight
₹170.00 (Price is Exclusive of GST) -
Hi Link HLK PM01 5V/3W Switch Power Supply Module
Features:
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test
- Low power consumption, environmental protection, no-load loss <0.1W
Environmental conditions:
- Technical indicators: Single bit
- Working temperature: – 20-60 +degree
- Storage temperature: + 80-40 -degree
- Relative humidity: 5-95%
- The cooling way: Natural cooling
- The atmospheric pressure: 80-106Kpa
- The altitude: 2000M or less.
₹170.00 (Price is Exclusive of GST)Hi Link HLK PM01 5V/3W Switch Power Supply Module
₹170.00 (Price is Exclusive of GST) -
Right Side MK8 extruder Aluminum 3D Printer Block
Specifications and Features:
- Right Short Side MK8 Extruder
- High-Quality Replacement for your blocked/damaged MK8 Extruder
- Available in 3 different types to support dual extruder setup
- Material: Aluminum alloy
- Weight: 60gm
₹170.00 (Price is Exclusive of GST)Right Side MK8 extruder Aluminum 3D Printer Block
₹170.00 (Price is Exclusive of GST) -
4A DC-DC Step-down Adjustable Constant Voltage Module
. High-power LED driver.
2. Lithium battery(or lead accumulator) charge.
3. Vehicle-mounted power supply.
4. Low voltage system power supply.
5. 6V, 12V, 14V, 24V battery charge.
6. On-board laptop power supply.
7. Regulated power supply.
8.Low voltage power supply system₹170.00 (Price is Exclusive of GST)4A DC-DC Step-down Adjustable Constant Voltage Module
₹170.00 (Price is Exclusive of GST) -
Component/IC Extraction Tool
IC Extraction Tool
- Dimensions : 97 x 45 x 14 mm
- Weight: 21 grams
- The PLCC can be easily removed from the substrate without damaging any IC conductors.
- Fits: The chip extraction tool is perfectly suitable for motherboards, microcontrollers, and programmers.
- Can be used to remove PLCC and IC from Sockets
- Made up of High-Quality Steel for durability
- Plastic Shielding to Prevent Shocks
₹170.00 (Price is Exclusive of GST)Component/IC Extraction Tool
₹170.00 (Price is Exclusive of GST) -
Official Raspberry Pi 5 Bumper Case
- Suitable for Raspberry 5
- Made from flexible silicone rubber
- Full access to the power button
- Mounting holes remain accessible underneath
₹170.00 (Price is Exclusive of GST)Official Raspberry Pi 5 Bumper Case
₹170.00 (Price is Exclusive of GST) -
Glue Gun 20 WATT 7MM HOT MELT
- Suitable for paper and crafts purposes only
- Glue gun will not heat up enough to melt glue in AC
- Take 5 to 8 minutes to heat
- Compatible glue stick thickness: 11 mm
₹173.00 (Price is Exclusive of GST)Glue Gun 20 WATT 7MM HOT MELT
₹173.00 (Price is Exclusive of GST)
