-
Speed Measuring Sensor Groove Coupler Module For Arduino
Speed Measuring Sensor
- Using imported groove optical coupling sensor, width 5mm.
- It has the output state light, if output high level, the lights are off. if output low level, it on.
- If it covered, it will output high level; otherwise, its output low level.
- Good signal and waveform, with a strong driving ability for more than 15mA.
- Equipped with a fixed bolt hole, easy install.
- Use the LM393 wide voltage comparer.
₹29.00 (excl. GST)Speed Measuring Sensor Groove Coupler Module For Arduino
₹29.00 (excl. GST) -
Pluto DIY Nano Drone Kit Pluto 1.2
Pluto DIY Nano Drone Kit Pluto 1.2
- Build your drone with available spares and open-source designs.
- Easy C++ API structure with open-source code.
- Start with simple “Alt Hold + Motion Control” and progress to advanced acrobatics.
- Created at IIT Bombay, made in India, and crash-resistant.
- Access open-source content and projects.
₹7,000.00 (excl. GST)Pluto DIY Nano Drone Kit Pluto 1.2
₹7,000.00 (excl. GST) -
ABS Plastic Landing Gear for Quadcopter (Pack of 4) – Made in INDIA
ABS Plastic Landing Gear for Quadcopter
- Color: Black
- Material: ABS Plastic
- Length: ~190mm
- Ground Clearance: 150 mm
- Compatibility: Q450 and S500 Frames
- Weight: 75 gm (total of 4)
₹132.00 (excl. GST)ABS Plastic Landing Gear for Quadcopter (Pack of 4) – Made in INDIA
₹132.00 (excl. GST) -
Tensioner Torsion Spring for GT2 6MM Timing Belt used in 3D Printer – 5Pcs
Tensioner Torsion Spring
5 x Tensioner Torsion Spring for GT2 6MM Timing Belt used in 3D Printer
₹40.00 (excl. GST)Tensioner Torsion Spring for GT2 6MM Timing Belt used in 3D Printer – 5Pcs
₹40.00 (excl. GST) -
Radial Ball Bearing 625ZZ for 3D Printer/ Robot – 4Pcs
Radial Ball Bearing
- Model: 625ZZ
- Quality: ABEC-3
- Dimensions: 4.6x16x5 mm
- ID (inner diameter): 4.6mm
- OD (outer diameter): 16mm
- Thickness: 5mm
₹55.00 (excl. GST)Radial Ball Bearing 625ZZ for 3D Printer/ Robot – 4Pcs
₹55.00 (excl. GST) -
8mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP08
8mm Bore Inner Ball Mounted
- Type: KP08
- Material: zinc alloy
- Bore Diameter:8mm
- Mounting Hole Diameter: 5 mm
- Durable with high precision
- Can withstand great weight
₹83.00 (excl. GST)8mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP08
₹83.00 (excl. GST) -
606ZZ Bearing 6x17x6 Stainless Steel Shielded Miniature Bearings – 2 Pcs
606ZZ Bearing 6x17x6
- Model: 606ZZ
- Inside diameter (ID): 6 mm.
- Outside diameter (OD): 17 mm.
- Width: 6 mm.
- Weight: 5 gm (each)
₹42.00 (excl. GST)606ZZ Bearing 6x17x6 Stainless Steel Shielded Miniature Bearings – 2 Pcs
₹42.00 (excl. GST) -
696ZZ Bearing 6x15x5 Stainless Steel Shielded Miniature Bearings (4Pcs)
696ZZ Bearing 6x15x5
- Model: 696ZZ
- Inside diameter (ID): 6 mm.
- Outside diameter (OD): 15 mm.
- Width: 5 mm.
- Weight: 16 gm. (Each has 3 gm).
₹82.00 (excl. GST)696ZZ Bearing 6x15x5 Stainless Steel Shielded Miniature Bearings (4Pcs)
₹82.00 (excl. GST) -
GT2 Timing Belt 200mm Width-6mm Closed-Loop Rubber Belt
GT2 Timing Belt 200mm Width-6mm
1 x GT2 Timing Belt 200mm Width-6mm Closed-Loop Rubber Belt for 3D Printer
₹46.00 (excl. GST)GT2 Timing Belt 200mm Width-6mm Closed-Loop Rubber Belt
₹46.00 (excl. GST) -
GT2 Close-Loop Rubber Timing Belt for 3D Printer
GT2 Close-Loop Rubber Timing Belt
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 188mm
- Belt Height: 1.52 mm
- Tooth Height: 0.76mm
- Shape: Closed Loop
₹43.00 (excl. GST)GT2 Close-Loop Rubber Timing Belt for 3D Printer
₹43.00 (excl. GST) -
IR2110 High and Low Side Driver IC DIP-14 Package
IR2110 High and Low Side Driver
Features:-
- Floating channel designed for bootstrap operation Fully operational to +500V or +600V Tolerant to negative transient voltage dV/dt immune
- Gate drive supply range from 10 to 20V
- Undervoltage lockout for both channels
- 3.3V logic compatible Separate logic supply range from 3.3V to 20V Logic and power ground ±5V offset
- CMOS Schmitt-triggered inputs with pull-down
- Cycle by cycle edge-triggered shutdown logic
- Matched propagation delay for both channels
- Outputs in phase with inputs
₹108.00 (excl. GST)IR2110 High and Low Side Driver IC DIP-14 Package
₹108.00 (excl. GST) -
MC1458P Amplifier IC
MC1458P Amplifier IC
This general purpose amplifier MC1458P OP amp is a simple circuit component used for signal amplification. Its typical dual supply voltage is ±9|±12 V, with a minimum of ±5 V and maximum of ±15 V. This op amp has a temperature range of 0 °C to 70 °C. This device uses dual power supplies. It has 2 channels per chip. This device utilizes bipolar technology.
₹57.00 (excl. GST)MC1458P Amplifier IC
₹57.00 (excl. GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale