-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST)
-
Nano And Uno Multi-Purpose Expansion Board For Nano 3.0
- Compatible with Arduino NANO
- All digital and analog pins breakout
- Compact size;
- External power supply current support
- Leads all pins out, convenient for wiring and doing experiments.
₹85.00 (excl. GST)Nano And Uno Multi-Purpose Expansion Board For Nano 3.0
₹85.00 (excl. GST) -
Metal Robot Chassis for 4WD Robo Car
- Metal Body
- Available in two color red & grey
- Many perforated holes have given for easy attachment of the development board and sensors
- Center Shaft gear motor and side shaft gear motor can be used for this chassis.
₹85.00 (excl. GST)Metal Robot Chassis for 4WD Robo Car
₹85.00 (excl. GST) -
Official Raspberry Pi 5 Camera FPC Cable – 200mm
- FPC Cable Type: Camera Cable
- Length: 200 mm
₹83.00 (excl. GST)Official Raspberry Pi 5 Camera FPC Cable – 200mm
₹83.00 (excl. GST) -
Official Raspberry Pi 5 Camera FPC Cable – 200mm
- FPC Cable Type: Camera Cable
- Length: 200 mm
₹83.00 (excl. GST)Official Raspberry Pi 5 Camera FPC Cable – 200mm
₹83.00 (excl. GST) -
8mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP08
8mm Bore Inner Ball Mounted
- Type: KP08
- Material: zinc alloy
- Bore Diameter:8mm
- Mounting Hole Diameter: 5 mm
- Durable with high precision
- Can withstand great weight
₹83.00 (excl. GST)8mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP08
₹83.00 (excl. GST) -
IRS2104 PDIP-8 Gate Driver
IRS2104 PDIP-8 Gate Driver
Features:
- Floating channel designed for bootstrap operation
- Fully operational to +600 V
- Tolerant to negative transient voltage, dV/dt immune
- Gate drive supply range from 10 V to 20 V
- Undervoltage lockout
- 3.3 V, 5 V, and 15 V input logic compatible
- Cross-conduction prevention logic
- Internally set deadtime
- High-side output in phase with input
- Shutdown input turns off both channels
- Matched propagation delay for both channels
₹82.00 (excl. GST)IRS2104 PDIP-8 Gate Driver
₹82.00 (excl. GST) -
696ZZ Bearing 6x15x5 Stainless Steel Shielded Miniature Bearings (4Pcs)
696ZZ Bearing 6x15x5
- Model: 696ZZ
- Inside diameter (ID): 6 mm.
- Outside diameter (OD): 15 mm.
- Width: 5 mm.
- Weight: 16 gm. (Each has 3 gm).
₹82.00 (excl. GST)696ZZ Bearing 6x15x5 Stainless Steel Shielded Miniature Bearings (4Pcs)
₹82.00 (excl. GST) -
MP3-TF-16P MP3 SD Card Module with Serial Port
Application
- Car navigation voice broadcast
- Road transport inspectors, toll voice prompts
- The train station, bus station voice prompts security check
- Electric power, telecommunications, financial operating room voice prompts
- The vehicle into or out of the channel to verify the voice prompts
- Border control channel voice prompts
- Multi-channel voice alarm or voice guidance equipment operation
- Electric sightseeing bus safety with voice notices
- Electrical and mechanical equipment failure alarm
- Fire alarm voice prompts
- Automatic broadcasting equipment, regular broadcast.
Specifications and Features :
- Supports sampling rates (kHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48.
- 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB.
- Fully supports FAT16, FAT32 file system, maximum support 32G TF card, support U disk to 32G, 64M bytes of NOR FLASH.
- A variety of control modes are available. IO control mode, serial mode, AD key control mode.
- The broadcast language spots feature, you can pause the background music being played. Advertising finished playing back background sound to continue playing.
- The audio data is sorted by folder, supports up to 100 folders, folders can assign every 255 Tracks
7,30 level adjustable volume, adjustable EQ 6.
₹82.00 (excl. GST)MP3-TF-16P MP3 SD Card Module with Serial Port
₹82.00 (excl. GST) -
Proto Shield Prototype expansion board for Arduino UNO
Features:
Power rails down the middle and sides
A reset button and an extra general use button
2x 3mm general use LEDs, red and green, as well as 2 matching resistors
A pass-thru ICSP stacking header so you can stack any kind of shield on top, and/or use an AVR programmer
A surface-mount chip area for up to 14 SOIC size parts
Compatible with tiny breadboards
Every pin is brought out
Gold plated pads₹82.00₹90.00(excl. GST)Proto Shield Prototype expansion board for Arduino UNO
₹82.00₹90.00(excl. GST) -
MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection
- Using high-quality dual-panel design, with power indicator and TTL signal output instructions.
- The switching signal having a DO (TTL) output and analog output AO.
- TTL output valid signal is low.
- The higher the voltage, the concentration of the analog output voltage is higher.
- A hydrogen gas detection with good sensitivity.
- Has a long life and reliable stability
₹80.00 (excl. GST)MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection
₹80.00 (excl. GST) -
6x15x5 696ZZ Stainless Steel Shielded Miniature Bearings – 4Pcs
The 6x15x5 696ZZ Bearings protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan.
Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
₹80.00 (excl. GST)6x15x5 696ZZ Stainless Steel Shielded Miniature Bearings – 4Pcs
₹80.00 (excl. GST) -
Tensioner Torsion Spring for GT2 6MM Timing Belt-5Pcs
Features:
- Maintain optimal belt tension to ensure high-quality prints every time.
- it is compatible with 6mm GT2 timing belts.
- It will absorb belt vibration.
- It can be mounted on top of the belts and requires no removal.
₹80.00 (excl. GST)Tensioner Torsion Spring for GT2 6MM Timing Belt-5Pcs
₹80.00 (excl. GST)
