-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹638.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹638.00(Price is Exclusive of GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹264.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹264.00 (Price is Exclusive of GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (Price is Exclusive of GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹207.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹207.00 (Price is Exclusive of GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)
-
5V 8 Channel Relay Module
Features:
- The 8550 transistor drive, drive ability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
₹285.00 (Price is Exclusive of GST)5V 8 Channel Relay Module
₹285.00 (Price is Exclusive of GST) -
Samsung ICR18650-26JM 3.6V 2600mAh 2C Li-ion Battery
- Size : 18650.
- Chemistry : ICR
- Nominal Capacity : 2600mAh
- Nominal Voltage : 3.6V
- Discharge : 5.2A Max Continuous
- Positive : Flat
₹282.00 (Price is Exclusive of GST)Samsung ICR18650-26JM 3.6V 2600mAh 2C Li-ion Battery
₹282.00 (Price is Exclusive of GST) -
HLY 26650 3.6V 5000mAh 3C Lithium-Ion Rechargeable Cell
- Shape:Â Cylindrical Battery
- Battery Type:Â Lithium-Ion Rechargeable Battery
- Voltage: 3.6V
- Capacity: 5000mAh
- Discharge Rate: 3C
- Rechargeable: Yes
₹281.00 (Price is Exclusive of GST)HLY 26650 3.6V 5000mAh 3C Lithium-Ion Rechargeable Cell
₹281.00 (Price is Exclusive of GST) -
BAK NMC N18650CL-29 3.6V 2900mAh 3C Li-ion Battery
- Model: NMC 18650
- Voltage: 3.6V
- Current: 4A（25℃）
- Nominal capacity: 2900mAh
- Battery cell type: (3C)
₹281.00 (Price is Exclusive of GST)BAK NMC N18650CL-29 3.6V 2900mAh 3C Li-ion Battery
₹281.00 (Price is Exclusive of GST) -
HX IFR32700 3.2V 6000mAh 3C LiFePO4 Battery
- Battery Typ Lithium Iron Phosphate battery 32700
- Nominal Voltage 3.2V
- Battery Capacity 6000mAh
- Capacity 6000mah
- Good high-temperature performance
- Safe and reliable, environmentally friendly
₹281.00 (Price is Exclusive of GST)HX IFR32700 3.2V 6000mAh 3C LiFePO4 Battery
₹281.00 (Price is Exclusive of GST) -
Raspberry Pi GPIO Expansion Board One to Three
- Compatible With Raspberry Pi 3, 3B+,4B
- High-Quality Material
- Converts One GPIO into Three GPIO
₹281.00 (Price is Exclusive of GST)Raspberry Pi GPIO Expansion Board One to Three
₹281.00 (Price is Exclusive of GST) -
Force Sensor – 0.5″ Force Sensitive Resistor
Features:-
Easily customizable to a wide range of sizes.
Cost-effective.
Ultra-thin: 0.45 mm.
Robust: up to 10 million actuations.
Simple and easy to Integrate.Applications:-
Testing and Measurement Equipment.
Embedded Electronics.
OEM Development Kit.
Consumer Electronics.
Multimeter.₹280.00 (Price is Exclusive of GST)Force Sensor – 0.5″ Force Sensitive Resistor
₹280.00 (Price is Exclusive of GST) -
Power Extension Board with 4IN+2UN+5MT FT-3513
Features-
Shock Proof ABS cabinet
Key holes for wall mounting
High conductivity for long life
Ultra durable heavy duty body
₹280.00 (Price is Exclusive of GST)Power Extension Board with 4IN+2UN+5MT FT-3513
₹280.00 (Price is Exclusive of GST) -
KCX BT003 Bluetooth 4.2 Stereo Audio Receiver Wireless Module
- Operating Voltage: 3.3-5VDC
- Operating Current: 35mA
- Bluetooth Version: 4.2
- Stereo Channel Output
₹275.00 (Price is Exclusive of GST)KCX BT003 Bluetooth 4.2 Stereo Audio Receiver Wireless Module
₹275.00 (Price is Exclusive of GST) -
Foldscope Instrument
- Foldscope is the ultra-affordable, paper microscope that you assemble yourself. Designed to be extremely portable, durable, and to give optical quality similar to conventional research microscopes (magnification of 140X and 2-micron resolution), Foldscope brings hands-on microscopy to new places.
₹275.00 (Price is Exclusive of GST)Foldscope Instrument
₹275.00 (Price is Exclusive of GST) -
Orange A Grade IFR26650 3.2V 3300mAh 3C LiFePO4 Battery
- Shape:Â Cylindrical Battery
- Battery Type: LiFePO4 Battery
- High performance and capacity
- Flat top to suit many devices fitting
- Suitable for portable devices
₹271.00 (Price is Exclusive of GST)Orange A Grade IFR26650 3.2V 3300mAh 3C LiFePO4 Battery
₹271.00 (Price is Exclusive of GST) -
TowerPro MG996R Digital High Torque Servo Motor (360° Rotation)
- Weight: 55g
- Dimension: 40.7×19.7×42.9mm
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
- Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
- Operating voltage: 4.8 ~ 6.6V
- Gear Type: Metal gear
- Dead band width: 1us
- Wire length: 32cm
₹271.00 (Price is Exclusive of GST)TowerPro MG996R Digital High Torque Servo Motor (360° Rotation)
₹271.00 (Price is Exclusive of GST)
