-
TEC1 12706 Thermoelectric Cooler 6A Peltier Module
Features:
Colour: white
Material: plastic + ceramics
Rated voltage: 12v
Rated power: 50~72w₹210.00 (Price is Exclusive of GST)TEC1 12706 Thermoelectric Cooler 6A Peltier Module
₹210.00 (Price is Exclusive of GST) -
Waterproof Ultrasonic Obstacle Sensor, Reversing Radar Sensor with Separate Probe
- Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions
- Small size, easy to use
- Operating Voltage: 5 V
- Sonar Sensing Range: 25-450 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 KHz
₹210.00 (Price is Exclusive of GST)Waterproof Ultrasonic Obstacle Sensor, Reversing Radar Sensor with Separate Probe
₹210.00 (Price is Exclusive of GST) -
IMAX B3 7-4V 11-1V Lithium Lipo RC Battery Balance Charge
Input voltage: AC 110V-240V
Balance charge current: 850mA
Display: Green & Red LED
Case: Plastic
Max charge power:10WBalance Charger for 7.4V-11.1V
₹215.00 (Price is Exclusive of GST)IMAX B3 7-4V 11-1V Lithium Lipo RC Battery Balance Charge
₹215.00 (Price is Exclusive of GST) -
BTS7960 Stepper Motor Driver Module 43A H-Bridge High-Power
Features :
- PWM capability of up to 25 kHz combined with active freewheeling.
- Switched mode current limitation for reduced power dissipation in overcurrent.
- Status flag diagnosis with current sense capability.
- Overtemperature shut down with latch behavior.
- Overvoltage lockout.
- Undervoltage shut down.
- Driver circuit with logic level inputs.
- Adjustable slew rates for optimized EMI.
- 74AHC244 Schmitt-trigger Octal buffer/line driver for ESD protection (Inputs accepts voltages higher than VCC).
Input port:
- RPWM: forward level or PWM signal input, active high.
- LPWM: Reverse level or PWM signal input, active high.
- R_EN: forward drive enable input, high-level enable, low level off.
- L_EN: Reverse drive enable input, high-level enable, low level off.
- R_IS: forward drive current alarm output.
- L_IS: Reverse drive current alarm output.
- VCC: +5 V power output, 5V power supply connection with the microcontroller.
- GND: signal common low end.
₹215.00 (Price is Exclusive of GST)BTS7960 Stepper Motor Driver Module 43A H-Bridge High-Power
₹215.00 (Price is Exclusive of GST) -
Orange A Grade ICR18350 3.7V 900mAh 4C Li-ion Battery
- Model No.: ICR18350
- Capacity (mAh): 900mAh
- Minimum capacity: 880mAh
- Nominal Voltage (V): 3.7V
- Discharge voltage: 3.0V
- Max. Charging Voltage (V): 4.20V
₹215.00 (Price is Exclusive of GST)Orange A Grade ICR18350 3.7V 900mAh 4C Li-ion Battery
₹215.00 (Price is Exclusive of GST) -
GT2 Timing Idler Pulley 20 Tooth For 6mm Belt 20 Tooth 5mm Bore-2Pcs
For precise motion control, GT2 belts and pulleys offer excellent precision at a great price. This pulley is meant for use with GT2 6mm wide belts only – MXL belts will slip due to the different tooth profiles.
 Features:
- Adopting high-quality Aluminum Alloy material，sturdy and durable
- Adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively
₹216.00 (Price is Exclusive of GST)GT2 Timing Idler Pulley 20 Tooth For 6mm Belt 20 Tooth 5mm Bore-2Pcs
₹216.00 (Price is Exclusive of GST) -
Digital Voltage Tester Meter
1.Model Number -Voltmeter usb
2.Measurement Range-3-7.5V
3.Type-Digital
4.Material-plastic
₹217.00 (Price is Exclusive of GST)Digital Voltage Tester Meter
₹217.00 (Price is Exclusive of GST) -
Stanley Bent Nose Pliers 200mm
The angled nose is capable of gripping and maneuvering objects in obstructed situations
Bent nose plier 6”, 8” carbon steel polished₹220.00 (Price is Exclusive of GST)Stanley Bent Nose Pliers 200mm
₹220.00 (Price is Exclusive of GST) -
51-152 Steel Shaft Claw Hammer
- Shaft 15% longer for better balance and control
- Soft grip ergonomic handle for comfort and grip
- Fully heat treated carbon steel head for strength,durability and safety
₹220.00 (Price is Exclusive of GST)51-152 Steel Shaft Claw Hammer
₹220.00 (Price is Exclusive of GST) -
Stanley Adjustable Wrench
Features
- Forged chrome vanadium steel construction for improved rigidity and durability providing long service life
- Black phosphate finish provides superb corrosion and abrasion resistance and improved grip for confident operation
- Etched measurement markings on jaw opening in both metric and SAE for convenient identification of fastener sizing
₹220.00 (Price is Exclusive of GST)Stanley Adjustable Wrench
₹220.00 (Price is Exclusive of GST) -
Water Protection Level Sensor Photoelectric -ROBFS-IR02B Diameter 14MM
Water Protection Level Sensor
- Model: FS-IR02
- Type: Photoelectric Liquid Level Sensor
- Operating Voltage: 5V DC
- Output Current: 12mA
- Operating Temperature: – 25 ~ 105 °C
- Material: Polycarbonate
₹220.00 (Price is Exclusive of GST)Water Protection Level Sensor Photoelectric -ROBFS-IR02B Diameter 14MM
₹220.00 (Price is Exclusive of GST) -
Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
Wheatstone bridge formation of Load Cell:
HX711 (24 bit Analog to Digital Converter)
HX 711 is a precision 24-bit analog to digital converter (ADC) specially designed for Weigh scales and industrial control applications to interface directly with a bridge sensor.
Simply connect Load cell wires to the HX711 module based on their color, then connect DAT (Data) pin to Arduino Analog pin A1 and connect CLK (Clock) pin to Arduin0 Analog pin A0, Put Vcc and GND supply from Arduino power source pins.
₹222.00 (Price is Exclusive of GST)Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
₹222.00 (Price is Exclusive of GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
