-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
Waveshare 12-bit I2C 16-Channel Servo Driver for micro: bit
Features of I2C 16-Channel Servo Driver:
- micro: bit edge connector, directly pluggable
- I2C controlled, using only 2 pins
- Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)
- Integrates 5V regulator, up to 3A output current, can be powered from the battery through VIN terminal
- Standard servo interface supports commonly used servo such as SG90, MG90S, MG996R, etc.
- Reserved I2C control pins, allows working with other control boards
- Comes with development resources and manual (micro: bit graphical examples like Bluetooth/2.4G wireless remote control)
₹1,257.00 (excl. GST)Waveshare 12-bit I2C 16-Channel Servo Driver for micro: bit
₹1,257.00 (excl. GST) -
Nova PM Sensor SDS011 High Precision Laser pm 2.5 Air Quality Detection Sensor
Features:
- Accurate and Reliable: laser detection, stable, good consistency.
- Quick response: response time is less than 10 seconds when the scene changes.
- Easy integration: UART output (or IO output can be customized), fan built-in.
- High resolution: the resolution of 0.3ug/m3.
₹2,078.00 (excl. GST)Nova PM Sensor SDS011 High Precision Laser pm 2.5 Air Quality Detection Sensor
₹2,078.00 (excl. GST) -
SeeedStudio Grove Ultrasonic Ranger
Comparison with HC-SR04
You might wonder why there is a need for this sensor when ultrasonic module HC-SR04 is already available in the market. The comparison of Grove Ultrasonic Ranger and traditional ultrasonic module HC-SR04 is as follows:
- The Grove – Ultrasonic Distance Sensor integrates a single-chip microcomputer, and the transmitting signal and the receiving signal share one pin by Time Division Multiplexing (TDM), so only one I/O pin is occupied. The HC-SR04 Ultrasonic (US) sensor comes with a 4 pin interface named VCC, Trig (signal output pin), Echo (signal input pin), and GND.
- Grove – Ultrasonic Distance Sensor module supports 3.3V as well as 5 V, but HC-SR04 only supports 5v voltage. As we know, the Raspberry pi I/O only supports 3.3v. Therefore, Grove Ultrasonic Ranger Sensor can be directly connected to the I/O of the Raspberry Pi, but HC-SR04 needs to use a voltage conversion circuit. The image of both the modules is as given below.
Features:
- Output: PWM
- 3.3 V / 5 V compatible
- Wide voltage level: 3.2 V~5.2 V
- Only 3 pins needed, so saves I/O resources
- Wide measurement range: 3 cm ~ 350 cm
- Easy to use: Just plug-and-play
₹334.00 (excl. GST)SeeedStudio Grove Ultrasonic Ranger
₹334.00 (excl. GST) -
FRC connector female 40 pin (Pack of 2)
-
Features/Specs:
- Gender: Female
- Connector Type: IDC
- Number Of Contacts: 40
- Number Of Rows: 2
- Pitch: 2.54mm
- Current Rating: 2A
- Mounting Type: Cable Mount
- Contact Material: Phosphor Bronze
- Minimum Operating Temperature: -65°C
- Maximum Operating Temperature: +105°C
- Housing Material: Thermoplastic
- Contact Plating: Nickel-plated terminals
- Color: Black
₹14.00 (excl. GST)FRC connector female 40 pin (Pack of 2)
₹14.00 (excl. GST) -
-
FRC connector male 40 pin (Pack of 2)
-
Features/Specs:
- 40 Pin Box Header Male Straight
- Arrangement: 20 x 2 pins
- Pitch: 2.54 mm
- Current Rating: 3 A max
- Working Voltage: 250V AC
- Gender: Male
- Connector Type: IDC
- Current Rating: 3A
- Insulation Resistance: 1000MΩ MIN
- Contact Impedance: 15mΩ MAX
- Mounting Type: PCB Mount
- Contact Material: Phosphor Bronze
- Operating Temperature: -25°C ~ +105°C
- Housing Material: Thermoplastic
- Contact Plating: Nickel-plated terminals
- Color: Black
₹14.00 (excl. GST)FRC connector male 40 pin (Pack of 2)
₹14.00 (excl. GST) -
-
FRC connector male 8 pin (Pack of 2)
-
Features/Specs:
- Gender: Female
- Connector Type: IDC
- Current Rating: 2A
- Mounting Type: Cable Mount
- Number Of Contacts: 8
- Number Of Rows: 2
- Pitch: 2.54mm
- Contact Material: Phosphor Bronze
- Minimum Operating Temperature: -65°C
- Maximum Operating Temperature: +105°C
- Housing Material: Thermoplastic
- Contact Plating: Nickel-plated terminals
- Color: Black
₹22.00 (excl. GST)FRC connector male 8 pin (Pack of 2)
₹22.00 (excl. GST) -
-
FRC connector Female 8 pin (Pack of 2)
-
Features/Specs:
- Gender: Female
- Connector Type: IDC
- Current Rating: 2A
- Mounting Type: Cable Mount
- Number Of Contacts: 8
- Number Of Rows: 2
- Pitch: 2.54mm
- Contact Material: Phosphor Bronze
- Minimum Operating Temperature: -65°C
- Maximum Operating Temperature: +105°C
- Housing Material: Thermoplastic
- Contact Plating: Nickel-plated terminals
- Color: Black
₹22.00 (excl. GST)FRC connector Female 8 pin (Pack of 2)
₹22.00 (excl. GST) -
-
FRC connector Male (Pack of 2) 16 Pin
- 16 Pin Box Header Male Straight
- Arrangement: 8 x 2 pins
- Pitch: 2.54 mm
- Current Rating: 3 A max
- Working Voltage: 250V AC
₹8.00 (excl. GST)FRC connector Male (Pack of 2) 16 Pin
₹8.00 (excl. GST) -
FRC connector Female 16 pin (Pack of 2)
- Gender: Female; Connector Type: IDC; Current Rating: 2A
- Mounting Type: Cable Mount; Number Of Contacts: 16; Number Of Rows: 2; Pitch: 2.54mm
- Contact Material: Phosphor Bronze; Housing Material: Thermoplastic
- Contact Plating: Nickel-plated terminals; Color: Black
- Minimum Operating Temperature: -65°C; Maximum Operating Temperature: +105°C
₹8.00 (excl. GST)FRC connector Female 16 pin (Pack of 2)
₹8.00 (excl. GST) -
5th Gen Prusa i3 Desktop 3D Printer DIY Kit (Unassembled)
Features of Prusa i3 Desktop 3D Printer DIY Kit
- 3D flatbed printer.
- Acrylic Plate, more stable and durable.
- Support ABS, PLA, PVA, WOOD, and NYLON easy to use.
- Support SD card with LCD for off-line printing (Included with the printer).
- Support Bowden extruder.
- Can be used for printing different items like small components model, decoration etc.
- Special printing software, transfer the STL file to print file.
- Special frame design for you to see the printing process clearly.
- Can make true-to-life and high-resolution models and objects.
- Quiet while working.
- Max heated bed temperature about 110°C(adjustable).
- Max extruder temperature about 240°C.
₹19,371.00 (excl. GST)5th Gen Prusa i3 Desktop 3D Printer DIY Kit (Unassembled)
₹19,371.00 (excl. GST) -
Original Prusa Mini+ 3D Printer Kit
Features:
- Silent Trinamic 2209 stepper drivers
- 3 thermistors, fan RPM sensors
- A Bowden system with3:1 gearing
- Super PINDA probe – no temperature drift
- Fast preheat:Â PLA 1 min / ASA 3 min
- Sensor less homing for X and Y axes
- 2.8″ graphic 65k color screen with G-Code preview
- Prusament PLA sample weight: ~2×25 g
₹58,644.00 (excl. GST)Original Prusa Mini+ 3D Printer Kit
₹58,644.00 (excl. GST) -
Original Prusa MK3S+ 3D Printer Kit
 Features:
- Adapted to fit Prusa’s new filament sensor;
- Includes one Bondtech BMG extruder with a 3:1 gearing ratio;
- Optimized geometry for heat-sink cooling;
- Less moving weight to reduce vibration and ghosting;
- Professional SLS 3D printed housing.
₹73,830.00 (excl. GST)Original Prusa MK3S+ 3D Printer Kit
₹73,830.00 (excl. GST)