No products in the cart.
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹390.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST)
84-096-23 127mm-5 Needle Nose Miniature Plier
- Long tempered jaws for working in hard to reach areas
- Forged steel construction
- Rust resistant finish
- Double dipped handle for comfort | Meets or exceeds ANSI standards
₹400.00 (Price is Exclusive of GST)84-096-23 127mm-5 Needle Nose Miniature Plier
₹400.00 (Price is Exclusive of GST)Stanley Bent Nose Pliers 200mm
The angled nose is capable of gripping and maneuvering objects in obstructed situations
Bent nose plier 6”, 8” carbon steel polished₹300.00 (Price is Exclusive of GST)Stanley Bent Nose Pliers 200mm
₹300.00 (Price is Exclusive of GST)Stanley 84-214-22 Wire Stripper 130mm
- Size: 130mm / 5 1/4- Inch
- Convenient hole for looping or bending wire
- Ideal for cutting, stripping speaker wire, appliance cords, etc
- Slide adjust for various gauge wire
₹200.00 (Price is Exclusive of GST)Stanley 84-214-22 Wire Stripper 130mm
₹200.00 (Price is Exclusive of GST)Stanley Combination Mini Plier, For Cutting, Size: 205 mm
- Color: Yellow and Black, Material: Plastic and Sturdy Steel
- Jaws and Cutting Edge are Induction Hardened & Tempered
- Black phosphate finish anti-rust protected
- Anti-rust Protected
- Package Contents: 1-Piece Plier
- Limited lifetime warranty offered on the product
₹450.00 (Price is Exclusive of GST)Stanley Combination Mini Plier, For Cutting, Size: 205 mm
₹450.00 (Price is Exclusive of GST)Stanley PLIER Long Nose, 203mm-8
- Features – Forged Steel Construction, Double dipped handles, Rust Resistant Finish
- Specifications – Part No. 84-102, Size: 203mm / 8″ Long Nose Plier
- Applications – Electric and Household applications
₹400.00 (Price is Exclusive of GST)Stanley PLIER Long Nose, 203mm-8
₹400.00 (Price is Exclusive of GST)External Nose Circlip Plier – 5 inch -84-332-23
- Limited lifetime warranty offered on the product
- This product comes in a proper packaging
- The first clamp fine polishing and processing blackening, good looking
₹350.00 (Price is Exclusive of GST)External Nose Circlip Plier – 5 inch -84-332-23
₹350.00 (Price is Exclusive of GST)Mini Hacksaw Blade 150mm
Here the hacksaw blades come in handy. These blades are fine-tooth saw blades, mainly made to cut metal.
₹250.00 (Price is Exclusive of GST)Mini Hacksaw Blade 150mm
₹250.00 (Price is Exclusive of GST)Mini Portable Digital Clamp Meter
- AC CURRENT RANGE: 10MA ~ 20A, 100MA ~ 200A, 1A ~ 400A.
- OVERLOAD PROTECTION: 400A ON ALL RANGES
- AC VOLTAGE: RANGE 1V ~ 450V
- DC VOLTAGE: RANGE 1V ~ 600V. OVERLOAD PROTECTION: 600V DC / (PEAK AC) ON ALL RANGES.
- RESISTANCE MEASUREMENT: 200K OHM RANGE.
₹550.00 (Price is Exclusive of GST)Mini Portable Digital Clamp Meter
₹550.00 (Price is Exclusive of GST)Mini Mutimeter -DT830D
Mini Multimeter-DT830D
1 piece each multimeter and bread board. All our products are made from quality items. We recommend that you read labels, warnings and directions of all products before use and not rely solely on the information. Care instruction keep away from the items or products which may cause damage to this product.
₹175.00 (Price is Exclusive of GST)Mini Mutimeter -DT830D
₹175.00 (Price is Exclusive of GST)Junior Hacksaw Blades – 12 inch
A pack of ten 150mm blades made from a strong but flexible carbon steel to ensure extra long life.
₹800.00 (Price is Exclusive of GST)Junior Hacksaw Blades – 12 inch
₹800.00 (Price is Exclusive of GST)Steel Frame Hacksaw -15-166 305mm/12”
- Depth of Throat: 220mm/8” 3/4”.Blade Size: 254mm / 12-Inch
- Structurally designed for maximum strength and durability
- Designed to cut metal and plastic in hard to reach places
- Ergonomically designed grip with thumb rest for maximum comfort
- Back blade stop for safe handling and use
₹700.00 (Price is Exclusive of GST)Steel Frame Hacksaw -15-166 305mm/12”
₹700.00 (Price is Exclusive of GST)Raspberry Pi 3 Official ABS Case Box
The Raspberry Pi 3 Official Case for Raspberry Pi 3 Model B only Red/White is a 5-part Enclosure for Raspberry Pi 2 Model B and Raspberry Pi B+. Official case for the Raspberry Pi from the Raspberry Pi Foundation.This case has a very attractive strawberry red and white color. It is made up of ABS.
₹125.00 (Price is Exclusive of GST)Raspberry Pi 3 Official ABS Case Box
₹125.00 (Price is Exclusive of GST)
