-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(excl. GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (excl. GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST)
-
Otto Humanoid Robot Kit For Robotics Learning
- Part Reference: Otto DIY Bot
- Application: For Robotics Learning
- Color: Varies and not constant as per image
- Structure Type: 3D Printed
₹1,350.00 (excl. GST)Otto Humanoid Robot Kit For Robotics Learning
₹1,350.00 (excl. GST) -
Otto Wheel Based Robot Kit for Robotics Learning
- Part Reference: Otto DIY Bot Wheel Based
- Application: For Robotics Learning
- Color: Varies and not constant as per image
- Structure Type: 3D Printed
- Microcontroller: Arduino Nano V3
₹1,250.00 (excl. GST)Otto Wheel Based Robot Kit for Robotics Learning
₹1,250.00 (excl. GST) -
Outdoor Monocular Astronomical Telescope-F36050 360/50mm
- PERFECT TELESCOPE F36050 SET – Give your little one an exciting glimpse of the cosmos with the Techtest Telescope F36050 Kit for Children! The set includes a telescope, 3 magnification lenses (H20mm, H6mm, 1.5X), zenith mirror, and a tabletop tripod stand for a steady image while exploring the skies.
- PERFECT FOR BEGINNERS – Inspire your little one’s love for astronomical, expose them to the beauty of the universe, and give them a head start when it comes to identifying stars and constellations. Our telescope with stand produces clear images to act as an effective educational toy for kids.
₹1,500.00 (excl. GST)Outdoor Monocular Astronomical Telescope-F36050 360/50mm
₹1,500.00 (excl. GST) -
OV7670 640×480 VGA CMOS Camera Image Sensor Module
Specifications and Features:
- MODEL: OV7670 640X480 VGA CMOS CAMERA
- Pixel Coverage: 3.6um x 3.6um;
- Duck Current: 12 mV/s at 6’C
- Support VGA, CIF and from CIF to 40 x 30 format;
- Vario Pixel method for sub-sampling; Auto Image Control: AEC, AGC, AWB, ABF, ABLC;
- Image Quality Control: Color saturation, hue, gamma, sharpness, and anti-blooming;
- ISP includes noise reduction and defect correction; Support image scaling; Lens shading correction;
- Flicker 50/60Hz auto-detection;
- Color saturation level auto adjust;
- Edge enhancement level auto adjust;
- De-noise level auto adjust
- High sensitivity for low light applications
- Low voltage suitable for embedded applications
- Standard sccb interface, compatible with i2c interface
₹108.00 (excl. GST)OV7670 640×480 VGA CMOS Camera Image Sensor Module
₹108.00 (excl. GST) -
P35 Small Float Level Control Switch Plastic Float Switch
Features:
- Long-lasting life
- Easy to use
₹85.00 (excl. GST)P35 Small Float Level Control Switch Plastic Float Switch
₹85.00 (excl. GST) -
Pagkis: 5pcs Non-Magnetic Stainless Steel Tweezers
- These are non-magnetic & self opening type (squeeze to close) tweezers.
- These can also be used for watch repair and jewelry repair work etc.
- These are made from good quality brushed stainless steel and are non magnetic
₹350.00 (excl. GST)Pagkis: 5pcs Non-Magnetic Stainless Steel Tweezers
₹350.00 (excl. GST) -
PAM8403 5V Two-channel Stereo Mini Class-D 3W+3W Audio Amplifier
PAM8403
    Application :
- Bluetooth Stereo Audio hands-free/headsets
- In robots that speak or generate sounds to indicate activities
- Portable Speakers
- LCD Monitors / TV Projectors
- Arduino or Raspberry Pi Game Machines
- Speaker Phones
₹20.00 (excl. GST)PAM8403 5V Two-channel Stereo Mini Class-D 3W+3W Audio Amplifier
₹20.00 (excl. GST) -
PBT Connector Terminal Block 2 Pin
- 5.08mm pitch.
- Pin header: Tin plated brass.
- Contacts: Nickel plated brass.
- Strong, compact, lightweight.
- Heat resistant.
₹5.00 (excl. GST)PBT Connector Terminal Block 2 Pin
₹5.00 (excl. GST) -
PBT Connector Terminal Block 3 Pin
- 5.08mm pitch.
- Pin header: Tin plated brass.
- Contacts: Nickel plated brass.
- Strong, compact, lightweight.
- Heat resistant.
₹8.00 (excl. GST)PBT Connector Terminal Block 3 Pin
₹8.00 (excl. GST) -
PCB Drill bit
Drill bit Applications:
- Drilling PCBs
- Drilling ornaments
- Drilling thin Aluminium plates
Drill bit specification:
- 0.8mm diameter
- High quality stainless steel
- Long term durability
- Good for though surfaces
₹12.00 (excl. GST)PCB Drill bit
₹12.00 (excl. GST) -
-
PCB Mounting Type 2 Cell Holder 18650 Battery Holder
- Material Plastic, Steel
- No Soldering Just Plug and Use standatd battery
- High quality and strong material
₹40.00 (excl. GST)PCB Mounting Type 2 Cell Holder 18650 Battery Holder
₹40.00 (excl. GST)
