No products in the cart.
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹390.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)
- “Robo Car DIY Kit with UNO Line Follower Obstacle Detector Edge Detector Maze Solver” already exists in your wishlist
Nova PM Sensor SDS011 High Precision Laser pm 2.5 Air Quality Detection Sensor
Features:
- Accurate and Reliable: laser detection, stable, good consistency.
- Quick response: response time is less than 10 seconds when the scene changes.
- Easy integration: UART output (or IO output can be customized), fan built-in.
- High resolution: the resolution of 0.3ug/m3.
₹2,078.00 (Price is Exclusive of GST)Nova PM Sensor SDS011 High Precision Laser pm 2.5 Air Quality Detection Sensor
₹2,078.00 (Price is Exclusive of GST)NPN Transistor
2N2222 is a Transistor. It has a gain value of 110 and a collector current of 600mA.
₹3.00 (Price is Exclusive of GST)NPN Transistor
₹3.00 (Price is Exclusive of GST)NRF24L01 Wireless Transceiver Module-2.4GHz
The embedded baseband protocol engine (Enhanced ShockBurst) is based on packet communication and supports various modes from manual operation to advanced autonomous protocol operation.
Features :
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Particularly suitable for industrial control applications.
- 125 Channels, Multi-point communication, and frequency hopping to meet the communication needs
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Available software to set the address only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
- Built-in voltage regulator
- Standard DIP Pitch Interface for embedded applications.
₹65.00 (Price is Exclusive of GST)NRF24L01 Wireless Transceiver Module-2.4GHz
₹65.00 (Price is Exclusive of GST)Official Raspberry Pi 5 Camera FPC Cable – 200mm
- FPC Cable Type: Camera Cable
- Length: 200 mm
₹83.00 (Price is Exclusive of GST)Official Raspberry Pi 5 Camera FPC Cable – 200mm
₹83.00 (Price is Exclusive of GST)Official Raspberry Pi 5 Camera FPC Cable – 200mm
- FPC Cable Type: Camera Cable
- Length: 200 mm
₹83.00 (Price is Exclusive of GST)Official Raspberry Pi 5 Camera FPC Cable – 200mm
₹83.00 (Price is Exclusive of GST)Official Raspberry Pi M.2 HAT+
- Fast Data Transfer: Achieve speeds of up to 450 Mbytes/s with the 4 Gbits/s PCIe 2.0 interface for NVMe SSDs and PCIe accessories.
- Seamless Compatibility: Fully compliant with HAT+ specification for easy integration with Raspberry Pi 5.
- Plug-and-Play: Automatically detected by the latest Raspberry Pi software and firmware.
- Easy Installation: Comes with a 16mm stacking header, spacers, and screws for convenient setup with the Active Cooler in place.
₹828.00 (Price is Exclusive of GST)Official Raspberry Pi M.2 HAT+
₹828.00 (Price is Exclusive of GST)OMRON 3D Printer Limit Switch ENDSTOP SS-5GL
Features :
- Switching capacity of 3A at 250VAC, 5A at 125VAC, 0.1A at 30VDC.
- Pin plunger, hinge, long hinge, simulated roller, hinge roller lever actuators available.
- Solder, quick connect, PCB terminals available.
- SPDT, SPST-NC, SPST-NO contact configuration.
- Two split springs ensure high stability and durability.
- Economical, subminiature snap action switch offers long service life (30 million operations minimum)
- All models are free from overtravel restrictions, permit easy setting
- Wide switching capacity range from micro voltage/current loads (1 mA at 5 VDC to high-capacity loads 10.1 A at 250VAC)
- Standard operating force, low force or super-low force models available
- RoHS Compliant
₹64.00 (Price is Exclusive of GST)OMRON 3D Printer Limit Switch ENDSTOP SS-5GL
₹64.00 (Price is Exclusive of GST)OP07CP Amplifier ICs
OP07CP Amplifier ICs
- IC Name: OP07
- Package/Case: DIP-8
₹16.00 (Price is Exclusive of GST)OP07CP Amplifier ICs
₹16.00 (Price is Exclusive of GST)Optical Fingerprint Reader R307 Sensor Module
- Integrated image collecting and algorithm chip together, ALL-in-One
- Low power consumption, small size, excellent performance. Please be informed that the product required prior knowledge regarding the usage.
- Good image processing capabilities can successfully capture an image up to resolution 500 dpi.
- Fingerprint reader can conduct secondary development, can be embedded into a variety of end products
- Professional optical technology, precise module manufacturing techniques.
₹950.00₹1,050.00(Price is Exclusive of GST)Optical Fingerprint Reader R307 Sensor Module
₹950.00₹1,050.00(Price is Exclusive of GST)Optical Liquid Level Sensor
Features:
- Measuring accuracy: 1MM
- Current output :15mA
- Operating voltage: 5v
- No mechanical moving parts, high reliability
- High precision level control
- Meet the safety standard requirements
- An easily mounting method with locking nut.
- Measurement range: single-point measurements
- Equipped with 50 cm cable length.
₹710.00 (Price is Exclusive of GST)Optical Liquid Level Sensor
₹710.00 (Price is Exclusive of GST)Orange 100PCS Rectifier/Schottky Diode Kit
Features:
- Used in the fields of electronic products, household appliances, and more.
- High precision mechanism design offers acute operation and long service life.
- Compact and lightweight, easy to carry and dismantle.
₹240.00 (Price is Exclusive of GST)Orange 100PCS Rectifier/Schottky Diode Kit
₹240.00 (Price is Exclusive of GST)Orange 11.1V 1300mAh 30C 3S Lithium Polymer Battery Pack
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹1,250.00₹1,299.00(Price is Exclusive of GST)Orange 11.1V 1300mAh 30C 3S Lithium Polymer Battery Pack
₹1,250.00₹1,299.00(Price is Exclusive of GST)
