-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
Ublox NEO 6M GPS module
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
₹335.00₹490.00(excl. GST)Ublox NEO 6M GPS module
₹335.00₹490.00(excl. GST) -
Esp8266-12E WIFI Module
- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
₹150.00 (excl. GST)Esp8266-12E WIFI Module
₹150.00 (excl. GST) -
Esp8266-01 Serial WIFI Wireless Transceiver Module
- 802.11 b/g/n Standards
- Wi-Fi Direct (P2P), soft-AP
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
₹125.00 (excl. GST)Esp8266-01 Serial WIFI Wireless Transceiver Module
₹125.00 (excl. GST) -
ESP32 Development Board CP2102 based
- Bluetooth Ultra-Low Power Consumption Dual Core
- Durable Product
- It has 38 PIN
₹500.00 (excl. GST)ESP32 Development Board CP2102 based
₹500.00 (excl. GST) -
ESP-12F ESP8266 Wifi IOT Module
- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- +19.5dBm output power
₹115.00 (excl. GST)ESP-12F ESP8266 Wifi IOT Module
₹115.00 (excl. GST) -
Wire Cutter and Stripper
- Flawless Finish
- Optimum Strength
- Best Quality
- Cutting range of wire 0.5mm to 2.5mm & 6mm
- Also Suitable for Electronic, Aviation &Â Automobile sectors
₹65.00 (excl. GST)Wire Cutter and Stripper
₹65.00 (excl. GST) -
Wire Clipper Nipper
Suitable for dressing components on printed circuit boards. Handles made out of ABS plastics. Diagonal cutters have intersecting jaws that cut the wire at an angle, leaving a flat tip.
₹65.00 (excl. GST)Wire Clipper Nipper
₹65.00 (excl. GST) -
TP4056 1A Li-ion Lithium Battery Charging Module Charging Board Charger Micro USB
- Input interface: Mini USB.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.2V.
- Full charge voltage: 4.2V.
- Battery over-current protection: 3 A
- The battery Undervoltage protection:Â 2.5 V
₹30.00 (excl. GST) -
Soldering Iron Stand
- Heavy-duty base to uphold the weight of Soldering iron 25W or lesser
- Nickel-plated spring holder
- Spring holder provides substantial room for holding the soldering iron support
₹55.00 (excl. GST)Soldering Iron Stand
₹55.00 (excl. GST) -
Solder Tin Wire Spool Reel 50 Gram
- Rosin Core Solder
- Minimum Resistance
- No Additional Flux or paste is required
- No dry Solder
- Low Melting Point
- Widely applied in electrical repairs
- Easy to use, flows well and heats evenly.
- With the solder wire reel, soldering can be accomplished quickly.
₹105.00 (excl. GST)Solder Tin Wire Spool Reel 50 Gram
₹105.00 (excl. GST) -
Solder Suction Tin Pump
- Metal body
- High suction power
- Teflon nozzle
- Easily replaceable nozzle
- Easy to clean and maintain
₹80.00 (excl. GST)Solder Suction Tin Pump
₹80.00 (excl. GST) -
SMPS Adaptor of 24V 2.5Amps
- Material: Plastic
- Colour: Black
- Dimensions (L x B x H): 6.5 cm x 3.5 cm x 10 cm
- Weight: 120 g
- Package Contents: 1 RO Water Purifier SMPS
- Warranty: 6 Months Seller Warranty on Manufacturing Defects
- Care Instructions: Check specifications before use
₹610.00 (excl. GST)SMPS Adaptor of 24V 2.5Amps
₹610.00 (excl. GST)
