-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
PM2.5 GP2Y1010AU0F Dust Smoke Particle Sensor
Features :
- Compliant with RoHS directive (2002/95/EC)
- Compact, thin package (46.0 × 30.0 × 17.6 mm)
- Low consumption current (Icc: MAX. 20 mA)
- The presence of dust can be detected by the photometry of only one pulse
- Enable to distinguish smoke from house dust
- Lead-free and RoHS directive compliant
₹466.00 (excl. GST)PM2.5 GP2Y1010AU0F Dust Smoke Particle Sensor
₹466.00 (excl. GST) -
PN532 NFC RFID Read/Write Module V3 Kit
Features:
- Support II2, SPI and HSU (High-Speed UART)
- I2C / UART: 3.3V ~ 24V TTL
- SPI: 3.3V TTL with 100-ohm resistors in series
- Communication distance: 5cm~7cm
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work in NFC Mode or RFID reader/writer Mode
- RFID reader/writer supports:
- Plug and play, compatible
- Built-in PCB Antenna, with 4cm~6cm communication distance
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work as an RFID reader/writer
- Work as a 1443-A card or a virtual card
- Exchange data with other NFC devices such as a smartphone
₹475.00 (excl. GST)PN532 NFC RFID Read/Write Module V3 Kit
₹475.00 (excl. GST) -
PNP Transistor – BC557 and S8550
- Bi-Polar PNP Transistor
- DC Current Gain (hFE) is 300 maximum
- Continuous Collector current (IC) is 100mA
- Emitter Base Voltage (VBE) is 6V
- Base Current(IB) is 5mA maximum
-
Pointed Bit Tip for Micro Soldering Iron
Features/Specs:
- suitable for:Â micro soldering Iron
- Material: Nickel
- Tip Type: Pointed
₹35.00 (excl. GST)Pointed Bit Tip for Micro Soldering Iron
₹35.00 (excl. GST) -
Portable Nano Mist Sanitizer Sprayer – USB Rechargeable
- [USB RECHARGEABLE] This machine can be refilled and recharge, comes with a portable USB cable.Capacity of this machine is about 30ml. Fill 30ml of Alcohol based Sanitizer in it. Make sure machine should be fully charge it before use. Just click the power button and sanitize your valuable.
- Â [High 380mah Li-ion Battery] : Homehop Automatic Nano facial Sanitizer sprayer disinfectant liquid alcohol spray hygienic machine has high 380 mAh Li-ion Battery.
- [30 ML CAPACITY] : The spray machine has a capacity of 30 ml and can be sprayed continuously for 20 minutes. 24 hours a day is enough to keep your stuff safe ( Not use Thick or Gel) in it.
- [PORTABLE SIZE FOR EVERYDAY CARE] Small size and light weight. You can conveniently put it in your backpack, sanitize it all day, This ca also be used as a Water Mist to refresh the Skin
₹250.00 (excl. GST)Portable Nano Mist Sanitizer Sprayer – USB Rechargeable
₹250.00 (excl. GST) -
Portable Resistor LED Potentiometer Kit for UNO R3
- 1 sets Handy Portable Resistor Kit for Arduino Starter Kit UNO R3 LED potentiometer tact switch pin header
- High Quality kit for arduino
₹150.00 (excl. GST)Portable Resistor LED Potentiometer Kit for UNO R3
₹150.00 (excl. GST) -
Potentiometer Shaft Rotary Volume Metallic 3 Pin
- Resistance: 1k Ω, 5kΩ, 10kΩ, 22kΩ, 47kΩ, 100kΩ, 470kΩ
- Tolerance: 20%.
- Shaft Length: 15mm.
₹18.00 (excl. GST)Potentiometer Shaft Rotary Volume Metallic 3 Pin
₹18.00 (excl. GST) -
Power Adaptor Dual Pin 12 Volt 1 Amps
- Stabilized Output, low ripple & low interference Ideal for CCTV Cameras / Routers / Modems / Cordless Phones / Set Top Boxes / Wireless Devices / POS Machines etc.
- Plug Type – 2 Pin
- 5.5mm DC Pin & 4.00mm Pin Combo
- Power supply for LED, SMD, LED strip, RGB LED strip
- Color as show on picture. Package includes 1 item.
₹90.00 (excl. GST)Power Adaptor Dual Pin 12 Volt 1 Amps
₹90.00 (excl. GST) -
Power Adaptor Dual Pin 5 Volt 1 Amps
- Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz.
- Input current (mA): 100.
- Output Power: 5V 2A
- Load regulation (%): ±5.
- Input Plug: 2-Pin EU type.
- Output Plug: 2 in 1 dual DC Jack (5.5mm + 4mm).
₹90.00 (excl. GST)Power Adaptor Dual Pin 5 Volt 1 Amps
₹90.00 (excl. GST) -
Power Adaptor Dual Pin 9 Volt 1 Amps
- AC Input Voltage: 100 ~ 240 V.
- Output Voltage(V): 9.
- Output Current (Amp): 1.
- Rated Frequency (Hz): 50 – 60.
- Cable Length: Approx 1.1m
₹90.00 (excl. GST)Power Adaptor Dual Pin 9 Volt 1 Amps
₹90.00 (excl. GST) -
Power Extension Board with 4IN+2UN+5MT FT-3513
Features-
Shock Proof ABS cabinet
Key holes for wall mounting
High conductivity for long life
Ultra durable heavy duty body
₹280.00 (excl. GST)Power Extension Board with 4IN+2UN+5MT FT-3513
₹280.00 (excl. GST) -
PowerMax Dual Channel Brushed ESC Motor Controller with EBD – 20A
- PowerMax Series Brushed Motor Controllers are dual channel motor controllers capable of driving 2 brushed DC motors.
- Signal-loss failsafe
- Synchronous rectification,
- Rregenerative braking, and an
- Isolated heat sink plate.
- The Powermax series can be used with any standard RC signals.
- Best option for Robowar Use.
₹2,700.00₹3,500.00(excl. GST)PowerMax Dual Channel Brushed ESC Motor Controller with EBD – 20A
₹2,700.00₹3,500.00(excl. GST)
