-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST)
-
N20-3V-100 RPM Micro Metal Gear-box DC Motor
Features :
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
₹225.00 (excl. GST)N20-3V-100 RPM Micro Metal Gear-box DC Motor
₹225.00 (excl. GST) -
70 x 20mm Pulley Wheel with 6mm Shaft Hole Diameter
Features :
- Smooth surface
- Durable
- Lightweight
₹20.00 (excl. GST)70 x 20mm Pulley Wheel with 6mm Shaft Hole Diameter
₹20.00 (excl. GST) -
70 x 40 mm Pulley Wheel with 6mm Shaft Hole Diameter
Features :
- Smooth surface
- Durable
- Lightweight
₹35.00 (excl. GST)70 x 40 mm Pulley Wheel with 6mm Shaft Hole Diameter
₹35.00 (excl. GST) -
₹50.00 (excl. GST)8 Channel Bi-Directional Logic Level Converter Module
₹50.00 (excl. GST) -
HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module
Features :
- It’s easy to use and completely encapsulated.
- You can set it as a slave or master.
- You can use the AT command set the baud rate.
- Coverage up to 60 meters.
- Built-in PCB antenna.
- UART design.
- Support bridge direct-driven mode simultaneously (no need for extra CPU).
- 20ms connection interval (default), quick to connect; Support AT instruction, to modify the baud rate of the serial port, gain MAC address and modify module name.
- Support AT instruction, to adjust the Bluetooth connection interval and control the forwarding rate (dynamic power consumption adjustment).
- Support APP; IO expansion.
- 2 channel ADC input (14 bit).
- 4 channel PWM (120Hz) output.
- The RSSI successive acquisition, auto read, and notification to APP (used in anti-lost alarm).
- Power indicator/alert.
- Support anti-hijack password setup, modification, and restoration.
- Ultra-low power consumption standby mode.
₹375.00 (excl. GST)HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module
₹375.00 (excl. GST) -
LM358DR SOIC-8 High Gain Operational Amplifier
Features:
- Single supply voltage from 3V to 32V and dual supply range from ±1.5V to ±16V
- Slew rate at unity gain is 0.3 V/µs
- Wide unity gain bandwidth of 0.7MHz
- Low drain supply current is 0.7mA independent of supply voltage
- Input offset voltage of 3mV
- Input offset current of 2nA
- Input bias current of -20nA
- Differential input voltage range equal to the maximum rated supply voltage of 32V
- Common mode rejection ratio (CMRR) of 80dB
- Operating temperature range from 0°C to 70°C
- Applications: Signal Processing, Sensing & Instrumentation, Consumer Electronics, Portable Devices, Motor Drive & Control
₹39.00 (excl. GST)LM358DR SOIC-8 High Gain Operational Amplifier
₹39.00 (excl. GST) -
YiHua 995D Hot Air Blower with Soldering Iron
The temperature fluctuation range ±1°C. Working Temperature Adjustable from 100 – 250 to 500C. Iron soldering station adapt to correct a temperature deviation caused by the environmental impact or replacement of heating elements, fans, soldering irons etc. The temperature range is corrected: ±50C.
Digital Display: With LED Screen digital display, shows temperature so you can easy control the temperature. Easy to deal with large joints, small spots and solder joint de-soldering. Operation Parameters Rated voltage 220V 50Hz Total Power 50W +/-10% Constant Temperature Power.
₹12,500.00 (excl. GST)YiHua 995D Hot Air Blower with Soldering Iron
₹12,500.00 (excl. GST) -
PCB Power Drill Machine
Features:
- Model – MB140
- Key-pin chuck
- Chuck capacity 0.4 to 1.0mm; 2.1 to 2.5mm
- Operating Voltage – 0 to 18 volts (D.C.)
- Ergonomic design includes a pencil grip for comfort
- Motor is fan cooled for long periods of use and longevity
- Overall length: 170mm (approx)
- RPM: 0 – 30,000 rpm
- Collete – (0mm) 1piece; (2.3mm) 1piece
- Weight: ~275grams
₹800.00 (excl. GST)PCB Power Drill Machine
₹800.00 (excl. GST) -
-
INGCO 2000 W Patented Metal Power and Hand Tools Heat Gun with Soft Rubber Grip
- Material: Others
- Item Dimension: 700 x 600 x 300 cm
- No Warranty
- INGCO Heat Gun 2000W
- Two speed setting, Thermal protection, Comes with 4 different nozzles & 1pcs scraper
- Material: Metal & Plastic with rubber grip, Color: Orange & Black
- Anti-burn design: the use of three-storey insulation design,can keep the user away from burns,Solidly made and work fine:this gun is made by quality materials
- Heat up quickly:this gun take advantage of double heating wire to achieve fast heating, the display will show real-time temperature
₹3,000.00 (excl. GST)INGCO 2000 W Patented Metal Power and Hand Tools Heat Gun with Soft Rubber Grip
₹3,000.00 (excl. GST) -
G1200 1200 x 12MP Multipurpose Digital Electronic Microscope with 7″ LCD Display
Save & output of Images and Videos: This LCD Screen digital microscope is equipped with a Micro SD card slot and 32G of the card. You can save the images and videos obtained during your observations to the 32G tf card and output.(Maximum support for 64G Micro SD cards)
Great Gift : This LCD digital microscope is perfect for circuit board inspection, QC inspection, watch/clock repair, textile industrial, kids education inspection, biological observation (not suitable for cells), medical professionals, scientific researchers, insects, coins, jewelry, and stamps. It’s the best gift for children, students, hobbyists, and other users.
₹9,500.00 (excl. GST)G1200 1200 x 12MP Multipurpose Digital Electronic Microscope with 7″ LCD Display
₹9,500.00 (excl. GST) -
Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
Features:
- Easy to use
- Easily Replaceable
₹140.00 (excl. GST)Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
₹140.00 (excl. GST)