No products in the cart.
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)
Mini Hacksaw Blade 150mm
Here the hacksaw blades come in handy. These blades are fine-tooth saw blades, mainly made to cut metal.
₹250.00 (Price is Exclusive of GST)Mini Hacksaw Blade 150mm
₹250.00 (Price is Exclusive of GST)Mini Portable Digital Clamp Meter
- AC CURRENT RANGE: 10MA ~ 20A, 100MA ~ 200A, 1A ~ 400A.
- OVERLOAD PROTECTION: 400A ON ALL RANGES
- AC VOLTAGE: RANGE 1V ~ 450V
- DC VOLTAGE: RANGE 1V ~ 600V. OVERLOAD PROTECTION: 600V DC / (PEAK AC) ON ALL RANGES.
- RESISTANCE MEASUREMENT: 200K OHM RANGE.
₹550.00 (Price is Exclusive of GST)Mini Portable Digital Clamp Meter
₹550.00 (Price is Exclusive of GST)Mini Mutimeter -DT830D
Mini Multimeter-DT830D
1 piece each multimeter and bread board. All our products are made from quality items. We recommend that you read labels, warnings and directions of all products before use and not rely solely on the information. Care instruction keep away from the items or products which may cause damage to this product.
₹175.00 (Price is Exclusive of GST)Mini Mutimeter -DT830D
₹175.00 (Price is Exclusive of GST)Junior Hacksaw Blades – 12 inch
A pack of ten 150mm blades made from a strong but flexible carbon steel to ensure extra long life.
₹800.00 (Price is Exclusive of GST)Junior Hacksaw Blades – 12 inch
₹800.00 (Price is Exclusive of GST)Steel Frame Hacksaw -15-166 305mm/12”
- Depth of Throat: 220mm/8” 3/4”.Blade Size: 254mm / 12-Inch
- Structurally designed for maximum strength and durability
- Designed to cut metal and plastic in hard to reach places
- Ergonomically designed grip with thumb rest for maximum comfort
- Back blade stop for safe handling and use
₹700.00 (Price is Exclusive of GST)Steel Frame Hacksaw -15-166 305mm/12”
₹700.00 (Price is Exclusive of GST)Raspberry Pi 3 Official ABS Case Box
The Raspberry Pi 3 Official Case for Raspberry Pi 3 Model B only Red/White is a 5-part Enclosure for Raspberry Pi 2 Model B and Raspberry Pi B+. Official case for the Raspberry Pi from the Raspberry Pi Foundation.This case has a very attractive strawberry red and white color. It is made up of ABS.
₹125.00 (Price is Exclusive of GST)Raspberry Pi 3 Official ABS Case Box
₹125.00 (Price is Exclusive of GST)Raspberry Pi 3 Model B Plus
New Original Raspberry Pi 3B Plus Built-in Broadcom 1.4GHz quad-core 64 bit processor with Low Energy On-Board Wifi Bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity.
₹3,450.00₹5,800.00(Price is Exclusive of GST)Raspberry Pi 3 Model B Plus
₹3,450.00₹5,800.00(Price is Exclusive of GST)Raspberry Pi 5 MP Camera Module
Raspberry Pi 5 MP Camera Module is a portable light weight camera that supports Raspberry Pi. It communicates with Pi using the MIPI camera serial interface protocol. It is normally used in image processing, machine learning or in surveillance projects. It is commonly used in surveillance drones since the payload of camera is very less. Apart from these modules Pi can also use normal USB webcams that are used along with computer.
₹450.00 (Price is Exclusive of GST)Raspberry Pi 5 MP Camera Module
₹450.00 (Price is Exclusive of GST)Raspberry Pi 4 Model B – 8GB RAM
Raspberry Pi 4 8GB with the 8GB RAM capacity provides a huge scope for various multi-tasking activities, running powerful data servers, projects, virtual machines etc. This mini-computer is a better alternative since it is both energy efficient and cost effective. It is a silent machine and uses less energy than any other computer. It provides faster networking as it comes with a Gigabit Ethernet and onboard wireless networking along with better Bluetooth connectivity. It can transfer data 10 times faster with the help of two USB 3.0 ports and two USB 2.0 ports.
₹6,500.00₹9,500.00(Price is Exclusive of GST)Raspberry Pi 4 Model B – 8GB RAM
₹6,500.00₹9,500.00(Price is Exclusive of GST)Raspberry Pi Pico
Designed by Raspberry Pi, RP2040 features a dual-core Arm Cortex-M0+ processor with 264KB internal RAM and support for up to 16MB of off-chip Flash. A wide range of flexible I/O options includes I2C, SPI, and — uniquely — Programmable I/O (PIO). These support endless possible applications for this small and affordable package.
₹290.00 (Price is Exclusive of GST)Raspberry Pi Pico
₹290.00 (Price is Exclusive of GST)- ₹1,850.00 (Price is Exclusive of GST)
MAXX PAMMA 936 Temperature Controlled Soldering Station ESD Safe 60 W Temperature Controlled (Round Tip)
₹1,850.00 (Price is Exclusive of GST) 600VA/360Watt Uninterrupted Power Supply -UPS FPS-755
- Compact Design Line Interactive UPS with Load Capacity of 360Watts / 600VA. Output Frequency (sync to mains) : 47 – 63 Hz Sync to mains
- Three Battery Backed up and Surge Protected 6A, 2/3 Pin Output Indian Power Socket
₹2,000.00 (Price is Exclusive of GST)600VA/360Watt Uninterrupted Power Supply -UPS FPS-755
₹2,000.00 (Price is Exclusive of GST)
