-
GL-12 840 Hole Solderless Breadboard
- Product model: GL-12
- Product pitch: 840 holes
- Excellent quality breadboard.
- ABS plastic material.
- Reusable for fast build a prototype of an electronic circuit
₹45.00₹65.00(excl. GST)GL-12 840 Hole Solderless Breadboard
₹45.00₹65.00(excl. GST) -
L293D Motor Driver Board
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
₹45.00 (excl. GST)L293D Motor Driver Board
₹45.00 (excl. GST) -
8X8 Mini Dot Matrix LED Display
- Easy to Install on Breadboard
- Bright LED lights
- Compact Design.
- LED Size: 3mm
- Configuration: Common Cathode
₹45.00 (excl. GST)8X8 Mini Dot Matrix LED Display
₹45.00 (excl. GST) -
Jumper Wire Male to Male 20 cm (Set of 40 Piece)
40 pc male to male
- Each cable length about 20cm or 8-inch
- The male ends meant for insertion into standard 0.1 inch (2.54mm) female sockets and the female ends are meant for insertion onto standard 0.1 inch (2.54mm) male headers
- Suitable for Arduino breadboard kit project, PCB project, pc motherboard, etc
- Through the pin connection, without welding, fit for fast circuit test.
₹45.00₹60.00(excl. GST)Jumper Wire Male to Male 20 cm (Set of 40 Piece)
₹45.00₹60.00(excl. GST) -
₹45.00
₹60.00(excl. GST)Jumper Wire Male to Female 20 cm (Set of 40 Piece)
₹45.00₹60.00(excl. GST) -
Jumper Wire Female to Female 20 cm (Set of 40 Piece)
Features :
Compatible with 2.54mm spacing pin headers
40pcs chromatic color jump wire
High quality and in good working condition
Durable and reusable
Easy to install and use
A popular choice for construction or repair
Be used for the electronic project and Genuine Arduino product
Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
₹45.00₹60.00(excl. GST)Jumper Wire Female to Female 20 cm (Set of 40 Piece)
₹45.00₹60.00(excl. GST) -
SW-420 Vibration Sensor Module
- Using SW-420 normally closed type vibration sensor.
- Comparator output, clean signal, good waveform, strong driving ability, >15mA.
- Using a wide voltage LM393 comparator.
- With bolt holes for easy installation.
₹45.00 (excl. GST)SW-420 Vibration Sensor Module
₹45.00 (excl. GST) -
DHT11 Temperature and Humidity Sensor Module
- DHT11 sensor with PCB and LED indicator; 3 to 5V power and I/O, 4 pins with 0.1″ spacing
- The board has pre-built 4.7K or 10K resistor, which you will need to use as a pull-up from the data pin to VCC.
- 2.5mA max current use during conversion (while requesting data)
- Good for 20-80% humidity readings with 5% accuracy
- Good for 0-50°C temperature readings ±2°C accuracy.
₹45.00₹92.00(excl. GST)DHT11 Temperature and Humidity Sensor Module
₹45.00₹92.00(excl. GST) -
Multicolor Flat Ribbon Cable, 20 Wire per 1 meter
Features :
- Easily and directly inserted into PCB.
- Suitable for internal wiring in office equipment, audio, and video machines.
- Durable and reusable.
- Easy to install and use.
- A popular choice for construction or repair.
- Useful for the electronic project and Genuine Arduino product.
₹44.00₹55.00(excl. GST)Multicolor Flat Ribbon Cable, 20 Wire per 1 meter
₹44.00₹55.00(excl. GST) -
GT2 Close-Loop Rubber Timing Belt for 3D Printer
GT2 Close-Loop Rubber Timing Belt
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 188mm
- Belt Height: 1.52 mm
- Tooth Height: 0.76mm
- Shape: Closed Loop
₹43.00 (excl. GST)GT2 Close-Loop Rubber Timing Belt for 3D Printer
₹43.00 (excl. GST) -
LM6UU 6 MM Linear Motion Bearing
LM6UU 6 MM Linear Motion Bearing
Features :
- Outer Casing: Chromium Steel
- Low friction, optimum loading capacity, long life.
- It has linear bearing ball cage, hardened coat at both end rings.
- No worry if replacement of any worn part.
- Low noise even in high-speed operation.
₹42.00 (excl. GST)LM6UU 6 MM Linear Motion Bearing
₹42.00 (excl. GST) -
606ZZ Bearing 6x17x6 Stainless Steel Shielded Miniature Bearings – 2 Pcs
606ZZ Bearing 6x17x6
- Model: 606ZZ
- Inside diameter (ID): 6 mm.
- Outside diameter (OD): 17 mm.
- Width: 6 mm.
- Weight: 5 gm (each)
₹42.00 (excl. GST)606ZZ Bearing 6x17x6 Stainless Steel Shielded Miniature Bearings – 2 Pcs
₹42.00 (excl. GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale