-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST)
-
Power Extension Board with 4IN+2UN+5MT FT-3513
Features-
Shock Proof ABS cabinet
Key holes for wall mounting
High conductivity for long life
Ultra durable heavy duty body
₹280.00 (excl. GST)Power Extension Board with 4IN+2UN+5MT FT-3513
₹280.00 (excl. GST) -
PowerMax Dual Channel Brushed ESC Motor Controller with EBD – 20A
- PowerMax Series Brushed Motor Controllers are dual channel motor controllers capable of driving 2 brushed DC motors.
- Signal-loss failsafe
- Synchronous rectification,
- Rregenerative braking, and an
- Isolated heat sink plate.
- The Powermax series can be used with any standard RC signals.
- Best option for Robowar Use.
₹2,700.00₹3,500.00(excl. GST)PowerMax Dual Channel Brushed ESC Motor Controller with EBD – 20A
₹2,700.00₹3,500.00(excl. GST) -
PowerMax Dual Channel Brushed ESC Motor Controller with EBD – 60A
- PowerMax Series Brushed Motor Controllers are dual channel motor controllers capable of driving 2 brushed DC motors.
- Signal-loss failsafe
- Synchronous rectification,
- Rregenerative braking, and an
- Isolated heat sink plate.
- The Powermax series can be used with any standard RC signals.
- Best option for Robowar Use.
₹4,900.00₹6,500.00(excl. GST)PowerMax Dual Channel Brushed ESC Motor Controller with EBD – 60A
₹4,900.00₹6,500.00(excl. GST) -
Pro Mini Atmega328 5V and 16MHz
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
₹650.00 (excl. GST)Pro Mini Atmega328 5V and 16MHz
₹650.00 (excl. GST) -
Propeller Pair-10X4.5 Inch Carbon Nylon
- Length: 10″.
- Pitch: 4.5″.
- Weight: 30 gm.
- Shaft Diameter: 7.7 mm.
- Total Length: 10 inch / 250 mm
- Material: Carbon Fiber
₹80.00 (excl. GST)Propeller Pair-10X4.5 Inch Carbon Nylon
₹80.00 (excl. GST) -
Proto Shield Prototype expansion board for Arduino UNO
Features:
Power rails down the middle and sides
A reset button and an extra general use button
2x 3mm general use LEDs, red and green, as well as 2 matching resistors
A pass-thru ICSP stacking header so you can stack any kind of shield on top, and/or use an AVR programmer
A surface-mount chip area for up to 14 SOIC size parts
Compatible with tiny breadboards
Every pin is brought out
Gold plated pads₹82.00₹90.00(excl. GST)Proto Shield Prototype expansion board for Arduino UNO
₹82.00₹90.00(excl. GST) -
Prototype PCB Vero Perforated Board
Size 4 x 4 inch Voltage 12 V DC Operating Temperature -20 to 50 Degree C Rated Pressure 15 kPA -
Pulse Heart Rate Sensor
- Biometric Pulse Rate or Heart Rate detecting sensor
- Plug and Play type sensor
- Operating Voltage: +5V or +3.3V
- Current Consumption: 4mA
- Inbuilt Amplification and Noise cancellation circuit.
- Diameter: 0.625”
- Thickness: 0.125” Thick
₹175.00 (excl. GST)Pulse Heart Rate Sensor
₹175.00 (excl. GST) -
Q250 Quadcopter Super Strong Carbon Fiber 4mm Arm FPV Racing Frame(250mm) Kit
Q250 Quadcopter
Features :
- Lightweight and Durable.
- Made by super strong and advanced engineering material.
- The frame has excellent strength.
- The arm equips dampers for the safe landing.
- The arm has multiple motor mounting holes.
- Equips vibration-free mounting bracket for FPV camera.
₹975.00 (excl. GST)Q250 Quadcopter Super Strong Carbon Fiber 4mm Arm FPV Racing Frame(250mm) Kit
₹975.00 (excl. GST) -
Quadcopter Drone DIY Kit – V1
- Built from quality glass fiber and polyamide nylon.
- Integrated PCB connections for direct soldering of your ESCs
- Pre-threaded brass sleeves for all of the frame bolts.
- Colored arms for orientation to keep you flying in the right direction.
- Large mounting tabs on main frame bottom plate for easy camera mounting.
- Easy assembly.
₹10,500.00 (excl. GST)Quadcopter Drone DIY Kit – V1
₹10,500.00 (excl. GST) -
Quadcopter Drone DIY Kit – V2
Drone DIY Kit Package Contents:
1 x F450 Quadcopter Frame
1 x Flysky i6 Radio Transmitter and Receiver with programmer
4 x 30A ESC
4 x A2212 1000/1400 KV Brushless Motor
1 x Naze 32 Flight Control Board
4 x 1045 (2CW+2CCW) Black Propeller
1 x Lipo Battery ChargerFeatures:
F450 Frame based Quadcopter Kit
Includes 30A ESC for speed control and Lipo battery Charger
Flight Control board Naze 32/ KK 2.1.5
Flysky i6 Radio controller transmitter receiver wireless
Includes Brushless motors and Propellers₹12,500.00 (excl. GST)Quadcopter Drone DIY Kit – V2
₹12,500.00 (excl. GST) -
₹1,120.00 (excl. GST)
Quadruped Bionic Smart Robot Dog
₹1,120.00 (excl. GST)
