-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹638.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹638.00(Price is Exclusive of GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹264.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹264.00 (Price is Exclusive of GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (Price is Exclusive of GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹207.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹207.00 (Price is Exclusive of GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)
-
5 Colors F5 MM LED Kit ORANGE 500PCS
Features:
- Low heat, energy-saving, low power consumption, long service life.
- Perfect for light decorations, LED Matrix, and Display Panel.
- Signal indicator and electronic and electrical experiment, including Arduino projects, etc.
₹294.00 (Price is Exclusive of GST)5 Colors F5 MM LED Kit ORANGE 500PCS
₹294.00 (Price is Exclusive of GST) -
Portable Nano Mist Sanitizer Sprayer – USB Rechargeable
- [USB RECHARGEABLE] This machine can be refilled and recharge, comes with a portable USB cable.Capacity of this machine is about 30ml. Fill 30ml of Alcohol based Sanitizer in it. Make sure machine should be fully charge it before use. Just click the power button and sanitize your valuable.
- Â [High 380mah Li-ion Battery] : Homehop Automatic Nano facial Sanitizer sprayer disinfectant liquid alcohol spray hygienic machine has high 380 mAh Li-ion Battery.
- [30 ML CAPACITY] : The spray machine has a capacity of 30 ml and can be sprayed continuously for 20 minutes. 24 hours a day is enough to keep your stuff safe ( Not use Thick or Gel) in it.
- [PORTABLE SIZE FOR EVERYDAY CARE] Small size and light weight. You can conveniently put it in your backpack, sanitize it all day, This ca also be used as a Water Mist to refresh the Skin
₹295.00 (Price is Exclusive of GST)Portable Nano Mist Sanitizer Sprayer – USB Rechargeable
₹295.00 (Price is Exclusive of GST) -
DC 24V Solenoid Cabinet Door Lock
 Features:
- Â Iron Body Material
- High-quality ultra-compact electric lock.
- Rustproof, durable, safe, and convenient to use.
- Suction which tightly sucks the iron, thus locking the door.
- Applicable for being installed in the escape door or fire door electronic controlled system.
- Adopts the principle of electric magnetism, when the current is through the silicon, the electromagnetic lock will achieve a strong.
₹297.00 (Price is Exclusive of GST)DC 24V Solenoid Cabinet Door Lock
₹297.00 (Price is Exclusive of GST) -
Transistor Assorted Kit -(150pcs)
Transistor Kit
- TO-92Â
- S9012 S9013 S9014 S9015 S9018 A1015
- S8050 S8550 A42 A92 C1815
- 2N5401 2N5551 A733 C945 2N3904 2N3906
- 17 Vaues, Each 10pcs, Total 170pcs
₹299.00 (Price is Exclusive of GST)Transistor Assorted Kit -(150pcs)
₹299.00 (Price is Exclusive of GST) -
ATmega328P Micro-Controller IC
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
₹300.00 (Price is Exclusive of GST)ATmega328P Micro-Controller IC
₹300.00 (Price is Exclusive of GST) -
TPA3118 Mono Digital Amplifier Board 60W Home Audio Kit
Applicable speaker impedance: 4-8 ohm(8 ohm is the best). Specifications: Working Voltage: DC 8-24V Power Output: 60W Applicable Speaker Impedance: 4-8 ohm PCB Board Size: 45 * 35mm / 1.77 * 1.4in Weight: 50g / 0.43oz Package List: 1 * TPA3118 Digital Amplifier Board
₹300.00 (Price is Exclusive of GST)TPA3118 Mono Digital Amplifier Board 60W Home Audio Kit
₹300.00 (Price is Exclusive of GST) -
XH-M604 Battery Charger Control Module DC 6-60V Storage Lithium Battery Charging Control Switch Protection Board
- Name: numerical control battery charging control module; Model: XH-M604; Input Voltage:DC 6-60V (max 80V)
- Display Precision:0.1V; Control Precision:0.1V; Output
- Voltage Tolerance:+/-0.1V; Application Fields:6-60V
- storage battery; Output Type: direct output
- Voltage Tolerance:±0.1V; Apply For:6-60V MAX 80V battery
₹300.00 (Price is Exclusive of GST)XH-M604 Battery Charger Control Module DC 6-60V Storage Lithium Battery Charging Control Switch Protection Board
₹300.00 (Price is Exclusive of GST) -
Two Wheel Drive (2WD Kit) Smart Robot Bot with Chassis, Bo Motor, Wheels -DIY Robot Chassis
- Mechanical structure is simple, it is easy to install
- Package included :- 1 x car chassis, 2 x gear motor(1:48), 2 x wheel and all necessary screw and nut
- Wheel size: 6.6cm x 2.6cm approx
- Wheel center hole: 5.3mm long, 3.5mm wide
₹300.00 (Price is Exclusive of GST)Two Wheel Drive (2WD Kit) Smart Robot Bot with Chassis, Bo Motor, Wheels -DIY Robot Chassis
₹300.00 (Price is Exclusive of GST) -
Temperature Humidity Time Display Meter with Clock – Hygrometer Thermometer Sensor
- Temperature Humidity Display Meter
- Wireless outdoor and indoor temperature (Fahrenheit or Celsius)
- Measures temperature and humidity level
- 1 x HTC (main unit) and 1 x AAA 1.5v Battery
- Includes clock, day, date and alarm function
- Provides for flip out bracket for free standing or wall fixing
₹300.00 (Price is Exclusive of GST)Temperature Humidity Time Display Meter with Clock – Hygrometer Thermometer Sensor
₹300.00 (Price is Exclusive of GST) -
TC-50 5V 2Amp Super Fast Charger with 1 Meter USB Cable
- Colour- White
- Compatible with any Android phone
- Connector GenderFemale-to-Male
₹300.00₹325.00(Price is Exclusive of GST)TC-50 5V 2Amp Super Fast Charger with 1 Meter USB Cable
₹300.00₹325.00(Price is Exclusive of GST) -
DHT22 Digital Temperature and Humidity Sensor Module
- Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
- Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
- Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
- Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
₹300.00 (Price is Exclusive of GST)DHT22 Digital Temperature and Humidity Sensor Module
₹300.00 (Price is Exclusive of GST) -
TB6600 Stepper Motor Driver Controller
Features :
- H bridge bipolar constant current drive.
- The biggest 4.0 A Eight kinds of output current are optional.
- The biggest 32 To subdivide 6 kinds of subdivision modes selectable.
- Input signal high-speed photoelectric isolation.
- A total of standard single pulse interface.
- Offline retention function.
- The semi-enclosed casing can adapt to a more stringent environment.
- Provide energy saving half automatic current lock function.
₹300.00 (Price is Exclusive of GST)TB6600 Stepper Motor Driver Controller
₹300.00 (Price is Exclusive of GST)
