-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
10M Ohm Resistor -(Pack of 5)
Resistor Coloring Codes-
₹6.00 (excl. GST)10M Ohm Resistor -(Pack of 5)
₹6.00 (excl. GST) -
0.1MM Copper Soldering Solder PPA Enamelled Repair Reel Wire
Specifications and Features:
- Wire Diameter: 0.1 mm.
- Length: about 15m
- Color: Copper
- Flux Content:about 15m
- Material: Copper / Copper Alloy
- Spool Size: 3.1cm x 3.1cm x 1.9cm.
- 100% Brand new and high quality!
- 1 roll of 0.1 mm Enamelled wire.
- It can be used to connect Fly line(Jump wire) for computer and mobile phone motherboard repair.
- No need to remove the lacquer, welding directly.
₹38.00₹44.00(excl. GST)0.1MM Copper Soldering Solder PPA Enamelled Repair Reel Wire
₹38.00₹44.00(excl. GST) -
CA3130EZ CMOS Op-Amp IC DIP-8 Package
Features
- MOSFET Input Stage Provides: – Very High ZI = 1.5 T (1.5 x 1012) (Typ) – Very Low II 5pA (Typ) at 15V Operation = 2pA (Typ) at 5V Operation
- Ideal for Single-Supply Applications
- Common-Mode Input-Voltage Range Includes Negative Supply Rail; Input Terminals can be Swung 0.5V Below Negative Supply Rail
- CMOS Output Stage Permits Signal Swing to Either (or both) Supply Rails
- Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
- Frequency Generator/Distorter
- Mobile jammers
- Voltage follower circuits
- DAC circuits
- Peak Signal/Noise detectors
- Oscillator circuits
Physical Attributes
- Length * Width * Height (mm): 9 x 7 x 7
- Weight (gm) : 0.2
₹35.00 (excl. GST)CA3130EZ CMOS Op-Amp IC DIP-8 Package
₹35.00 (excl. GST) -
₹25.00 (excl. GST)22E 2w Carbon Film Resistor – Pack of 5
₹25.00 (excl. GST) -
270k Ohm Resistors, 1/4 Watt, 5% (Pack of 5)
Features-
Resistance: 270K Ohm,
Power Rating: 1/4Watt,
Approximate Maximum Current:Â 1.1mA
₹5.00₹10.00(excl. GST)270k Ohm Resistors, 1/4 Watt, 5% (Pack of 5)
₹5.00₹10.00(excl. GST) -
170 Tie Point Mini Self-Adhesive Solderless Breadboard (Pack of 2)
Features :
- Use: experimental, testing, robot
- Matching jumper, diameter 0.8mm
- Accepts 20-29 AWG wire sizes.
- Adhesive-backed for permanent mounting.
- Color:Â Green, Yellow, Black.
₹57.00 (excl. GST)170 Tie Point Mini Self-Adhesive Solderless Breadboard (Pack of 2)
₹57.00 (excl. GST) -
Motor Driver Module TA6586 Based
Features:
- Heavy-duty screw terminal for the input.
- Can be connected directly to the 433MHz receiver output.
- Can drive up to 5A of current.
- Drives 2 motors.
₹165.00 (excl. GST)Motor Driver Module TA6586 Based
₹165.00 (excl. GST) -
Resistor 5 Watt 5 Ohm Resistance Axial Lead Ceramic Cement Power Resistor
Product:5W 220 Ohm,
cement resistorPower:5W
Resistance:5 Ohm
Body material:Cement
Tolerance: +/-5%
Color: White
Body Size (approx. ):0.87 x 0.37 x 0.37inch / 22 x 9.5 x 9.5mm(L * W * H)
Lead length(approx. ):0.8inch/21mm,
Lead diameter(approx. ): 0.026 inch/0.65mmPer Piece,
Weight(approx. ):0.18oz/5g
PACKAGE CONTENT: 5 x Cement Resistors
₹55.00 (excl. GST)Resistor 5 Watt 5 Ohm Resistance Axial Lead Ceramic Cement Power Resistor
₹55.00 (excl. GST) -
₹25.00 (excl. GST)22E 2w Carbon Film Resistor – Pack of 5
₹25.00 (excl. GST) -
3K3 10W Resistor 5% – (Pack of 5)
Specification
- Tolerance – 5%
- Power Rating – 3 W
- Resistance – 1 Ohm / 1R
- Resistor Type: Wire Wound
₹36.00 (excl. GST)3K3 10W Resistor 5% – (Pack of 5)
₹36.00 (excl. GST) -
1K ohm Resistor -2 Watt (5 Pieces Pack)
Features
Electronics Components Passive Components Electronics Components Type Resistors Resistor Type Carbon Film Resistor Resistance Value  1 Ohms Power Rating of Resistor 2 Watt Tolerance       5% ₹20.00 (excl. GST)1K ohm Resistor -2 Watt (5 Pieces Pack)
₹20.00 (excl. GST) -
6E8 ohm 5 Watt Wire Wound Resistor (Pack of 2)
Features/Specs:
- Resistor Value: 6.8 ohm
- Wattage: 5 Watt
- Type: Wire Wound
₹30.00 (excl. GST)6E8 ohm 5 Watt Wire Wound Resistor (Pack of 2)
₹30.00 (excl. GST)
