-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
Full Set DIY 2DOF Robot Arm Manipulator Claw+2pcs Servo Brackets(Not Assembly) Kit
Specifications and Features :
- Aluminum Matte Coat Pan and Tilt for the horizontal surface, unassembled
- Servo bracket used in the shoulders and knees or another joint of humanoid robots, biped robots etc.
- Can plant a camera or IR sensor for Robot.
- Package total weight: 112 gm
- Clamp Claw:
- Weight capacity is about 300 gm objects
- Material: Full aluminum alloy
- Weight: About 64gm
- Maximum angle: 54mm
- Total length: 110mm (paw when closed overall longest length)
- Total width: 94mm (the claws open when the maximum overall width)
- Compatible with our MG995 Servo
₹1,887.60 -
Plastic Landing Gear for Quadcopter
Features :
- Good-Quality Gears
- Provides 200mm ground clearance
- Skid proof gears
- Compatible with Q450 and S500 and another large size frames
₹263.00 -
Servo Driver Module Shield 16 Channel
Features :
- The I2C input, PWM output control 16 roads, steering gear can 16 roads.
- The steering gear power independent V + input maximum 6 V.
- Logic signals and logical power independent output for 3V to 5 V.
- 40-1000 Hz frequency.
₹525.00 -
Yellow 38 Teeth Plastic Spur Gear
Features:
- Good Quality Material
- Light Weight
- Heavy Duty and Long Life
- Good Temperature and Environmental Resistance
₹300.00 -
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
Features :
- Compatible with MK KK flight control installment pitch of holes
- Compatible with MK KK flight control system
- Can connect 1-8 ESC.
- Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
₹144.00 -
RunCam Phoenix 2 Micro FPV Camera for Quadcopters
Features:
- New upgraded CPU for better performance
- High quality 6 layer glass lens for better picture
- Supports Image Mirror & Flip
- Low latency, high performance
- Excellent low light performance
₹4,060.00 -
RunCam Phoenix 2 Nano Edition 1000 TVL FPV Camera
Features:
- 7G ƒ/2.0 big aperture glass lens. Less red lens flare
- Excellent Image Quality – in day or night!
- 1/2″ big image sensor
- f/2.0 aperture for more light
- Excellent low light performance
- Less digital image shimmer
- New upgraded CPU for better performance
- Better low light performance than even the RunCam Eagle!
- High quality 6 layer glass lens for better picture
- PAL/NTSC & 4:3/16:9 Switchable
- Supports Image Mirror & Flip
- Low latency, high performance
₹4,137.00 -
1-8S Lipo Battery Voltage Tester
Features :
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- It has a mode button at the top for setting the desired voltage value.
₹154.001-8S Lipo Battery Voltage Tester
₹154.00 -
MT8870 DTMF Audio/Speech Decoding Telephone Module
Features:
- Onboard voice input interface
- Low power consumption
- Internal gain setting amplifier
- Onboard LED, it is very convenient to check the output state.
- Adjustable guard time
- Central office quality
- Onboard 3.5mm input interface
- 5 Channel interface
- On-board MT8870 frequency decoder chip
- Power-down mode
- Inhibit mode
- Onboard audio input interface
- Onboard LED lights for output state indication Complete DTMF Receiver.
- Does not require external circuits or wiring, it can be inserted directly into the UNO/MEGA2560/DUE board to use.
- 12-Digital outputs decode mobile and fixed telephone keys (0-9, * #). Also, another 4 Digital output(ABCD) can use “DTMF Dial” for Software control.
₹147.00 -
PM2.5 GP2Y1010AU0F Dust Smoke Particle Sensor
Features :
- Compliant with RoHS directive (2002/95/EC)
- Compact, thin package (46.0 × 30.0 × 17.6 mm)
- Low consumption current (Icc: MAX. 20 mA)
- The presence of dust can be detected by the photometry of only one pulse
- Enable to distinguish smoke from house dust
- Lead-free and RoHS directive compliant
₹466.00 -
Seed Studio Grove 6 Axis Accelerometer & Gyroscope (BMI088)
Features:
- The BM1088 is designed for drones, robotics and industrial applications with challenging performance requirements.
- Wide acceleration measurement range(up to 24g)
- The accelerometer features a low TCO of 0.2 mg/K and low spectral noise of only 230 pg/sqrt(Hz) in the widest measurement range of ± 24 g
₹3,595.00 -
OMRON 3D Printer Limit Switch ENDSTOP SS-5GL
Features :
- Switching capacity of 3A at 250VAC, 5A at 125VAC, 0.1A at 30VDC.
- Pin plunger, hinge, long hinge, simulated roller, hinge roller lever actuators available.
- Solder, quick connect, PCB terminals available.
- SPDT, SPST-NC, SPST-NO contact configuration.
- Two split springs ensure high stability and durability.
- Economical, subminiature snap action switch offers long service life (30 million operations minimum)
- All models are free from overtravel restrictions, permit easy setting
- Wide switching capacity range from micro voltage/current loads (1 mA at 5 VDC to high-capacity loads 10.1 A at 250VAC)
- Standard operating force, low force or super-low force models available
- RoHS Compliant
₹64.00