-
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST) -
Flame Induction Fan kit School Science DIY Kit
Age Range : 8 to 13 YearsOEM & ODM : Available₹545.00 (Price is Exclusive of GST)Flame Induction Fan kit School Science DIY Kit
₹545.00 (Price is Exclusive of GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹638.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹638.00(Price is Exclusive of GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹462.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹462.00 (Price is Exclusive of GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹264.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹264.00 (Price is Exclusive of GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹207.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹207.00 (Price is Exclusive of GST)
-
Hi Link HLK PM01 5V/3W Switch Power Supply Module
Features:
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test
- Low power consumption, environmental protection, no-load loss <0.1W
Environmental conditions:
- Technical indicators: Single bit
- Working temperature: – 20-60 +degree
- Storage temperature: + 80-40 -degree
- Relative humidity: 5-95%
- The cooling way: Natural cooling
- The atmospheric pressure: 80-106Kpa
- The altitude: 2000M or less.
₹170.00 (Price is Exclusive of GST)Hi Link HLK PM01 5V/3W Switch Power Supply Module
₹170.00 (Price is Exclusive of GST) -
EasyMech Bracket For NEMA23 Stepper Motor – Straight
Features :
- Most accurate design for NEMA23 Stepper Motor
- Made from High-Quality MS.
- Equips extra holes for user-defined motor fitting.
₹170.00 (Price is Exclusive of GST)EasyMech Bracket For NEMA23 Stepper Motor – Straight
₹170.00 (Price is Exclusive of GST) -
Arduino Nano V3
- Operating Voltage (logic level): 5V
- With USB cable and Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
₹170.00 (Price is Exclusive of GST)Arduino Nano V3
₹170.00 (Price is Exclusive of GST) -
N30 High Magnetic Motor with Propeller (Set of 2)
- Axis diameter:1mm
- Axis length:8mm
- Electrical size:20*10*12mm
₹170.00 (Price is Exclusive of GST)N30 High Magnetic Motor with Propeller (Set of 2)
₹170.00 (Price is Exclusive of GST) -
CJMCU-34725 TCS34725 Color Sensor RGB Module
- Operating Voltage: 3.3V
- Supply Voltage: 3.3V-5V
- The TCS3472 device provides digital return values for red, green, blue (RGB) and bright light sensing
- Color management is more accurate.
- The high sensitivity.
- Wide dynamic range.
- IR shading filters make the TCS3472 ideal.
₹168.00 (Price is Exclusive of GST)CJMCU-34725 TCS34725 Color Sensor RGB Module
₹168.00 (Price is Exclusive of GST) -
Orange A Grade ISR 18650 3.7V 2000mAh 10C Li-ion Battery
- Model No.: ISR18650-2000
- Capacity (mAh): 2000
- Output Voltage: 3.7V
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
₹166.00 (Price is Exclusive of GST)Orange A Grade ISR 18650 3.7V 2000mAh 10C Li-ion Battery
₹166.00 (Price is Exclusive of GST) -
Roofer A Grade INR18650-2200A 3.7V 2200mAh 1C Li-ion Battery
- Model No.: INR 18650 2200
- Capacity (mAh): 2200
- Output Voltage: 3.7V
- Charge Rate: 1C
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
₹165.00 (Price is Exclusive of GST)Roofer A Grade INR18650-2200A 3.7V 2200mAh 1C Li-ion Battery
₹165.00 (Price is Exclusive of GST) -
0.96 Inch I2C/IIC 4pin OLED Display Module BLUE
Features of 4 pin 128 x 64 OLED Display
- Super High Brightness (Adjustable)
- Super High Contrast (Adjustable)
- Embedded Driver/Controller
- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- working voltage: 3.3V
- Control Chip: SSD1306
₹165.00 (Price is Exclusive of GST)0.96 Inch I2C/IIC 4pin OLED Display Module BLUE
₹165.00 (Price is Exclusive of GST) -
Orange ICR18650-22F 3.7V 2200mAh 2C Li-ion Battery
- Model No.: ICR18650-22F
- Capacity (mAh): 2200
- Output Voltage: 3.7V
- Charge Rate: 2C
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
₹164.00 (Price is Exclusive of GST)Orange ICR18650-22F 3.7V 2200mAh 2C Li-ion Battery
₹164.00 (Price is Exclusive of GST) -
801S Vibration Shock Sensor Module
- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
₹163.00 (Price is Exclusive of GST)801S Vibration Shock Sensor Module
₹163.00 (Price is Exclusive of GST) -
Hi-Link Switch Power Supply Module (HLK PM01 5V/3W)
Hi-Link Switch Power Supply Module
Environmental conditions:
- Technical indicators: Single bit
- Working temperature: – 20-60 +degree
- Storage temperature: + 80-40 -degree
- Relative humidity: 5-95%
- The cooling way: Natural cooling
- The atmospheric pressure: 80-106Kpa
- The altitude: 2000M or less.
₹161.00 (Price is Exclusive of GST)Hi-Link Switch Power Supply Module (HLK PM01 5V/3W)
₹161.00 (Price is Exclusive of GST) -
12mm Square Flange Bushing Linear Bearing LMK12LUU
Features :
- Smooth moving
- Low friction
- High rigid
- Long life
- Economical and easy to maintain.
₹161.00 (Price is Exclusive of GST)12mm Square Flange Bushing Linear Bearing LMK12LUU
₹161.00 (Price is Exclusive of GST)
