-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
Raspberry Pi Zero 2 W
At the heart of it is a 1GHz BCM2710A1 with 64-bit ARM Cortex-A53 CPU with 512MB RAM. Quite frankly, this Pi is about four times faster than the original Raspberry Pi and is only a fraction of the cost of the current RPi3.
Features-
- Input voltage(V) – 5V DC 2.5A
- Bluetooth Version – 4.2
- Operating Temperature Range( °C) – -20 to 70
₹950.00 (excl. GST)Raspberry Pi Zero 2 W
₹950.00 (excl. GST) -
RC4558P Operational Amplifiers
RC4558P Operational Amplifier
Subcategory:Amplifier ICs
Supply Type:Single, Dual
Technology:Bipolar
Voltage Gain dB:109.54 dB
Width:6.35 mm
Unit Weight:440.400mg
₹23.00 (excl. GST)RC4558P Operational Amplifiers
₹23.00 (excl. GST) -
RCWL-0516 Microwave Radar Human Body Induction Switch Module Intelligent Sensor
- Transmission signal processing control chip RCWL-9196.
- Wide operating voltage range 4.0V to 28.0V
- Penetrating detection capability, compared with the traditional infrared feeling PIR
- Adjustable Block time and distance
- 3.3V output power supply
₹40.00 (excl. GST) -
Readytosky 80A ESC 2-6S Brushless ESC Speed Controller for RC Drone
Features:
- Security power function: When the power is turned on, regardless of the throttle stick at any position will not start the motor immediately to prevent personal injury
- Throttle range calibrated function: to adapt the throttle differences between different strokes, improve the linearity of throttle response
- programmed project (available throttle stick or card LED parameter settings):
- Brake setting: No brake / with brake
- Battery Type: Lithium battery / NiMH
- Low Voltage Protection Mode: Soft Shutdown / hard off
- Low Voltage Protection Threshold: low / medium / high
- start mode: Normal / Soft / Super-soft and start
- Timing: low / medium / high
- Restore factory defaults
- Comprehensive protection features:
- Under-voltage protection: the program set by the user when the battery voltage is below the protection threshold, ESC automatically reduces the output power
- Overvoltage Protection: input voltage exceeds the input range are not allowed to start, automatic protection, also issued a hasty “beep” Warning
- Overheat protection: built-in temperature detection circuit that automatically reduces the output power ESC temperature is too high
- Remote signal loss protection: remote control signal is lost for 1 second to reduce the power, and then have two seconds to turn off without the remote control signal output
₹1,866.00 (excl. GST)Readytosky 80A ESC 2-6S Brushless ESC Speed Controller for RC Drone
₹1,866.00 (excl. GST) -
₹540.00 (excl. GST)Red 2WD Aluminum Smart Robot Car Chassis Kit DIY
₹540.00 (excl. GST) -
Resistance Box Assorted
-Precision quality with 12 mm thick rectangular brass blocks and silk covered non-inductive windings
– Coils are connected with double nut systems are fitted in spray painted teak wood box, standard quality
– Accuracy 0.05 to 0.1%
– These Boxes are available in several ranges₹22.00 (excl. GST)Resistance Box Assorted
₹22.00 (excl. GST) -
Resistor 5 Watt 220 Ohm Resistance Axial Lead Ceramic Cement Power Resistor
Product:5W 220 Ohm,
cement resistorPower:5W
Resistance:220 Ohm
Body material:Cement
Tolerance: +/-5%
Color: White
Body Size (approx. ):0.87 x 0.37 x 0.37inch / 22 x 9.5 x 9.5mm(L * W * H)
Lead length(approx. ):0.8inch/21mm,
Lead diameter(approx. ): 0.026 inch/0.65mmPer Piece,
Weight(approx. ):0.18oz/5g
PACKAGE CONTENT: 5 x Cement Resistors
₹140.00 (excl. GST)Resistor 5 Watt 220 Ohm Resistance Axial Lead Ceramic Cement Power Resistor
₹140.00 (excl. GST) -
Resistor 5 Watt 5 Ohm Resistance Axial Lead Ceramic Cement Power Resistor
Product:5W 220 Ohm,
cement resistorPower:5W
Resistance:5 Ohm
Body material:Cement
Tolerance: +/-5%
Color: White
Body Size (approx. ):0.87 x 0.37 x 0.37inch / 22 x 9.5 x 9.5mm(L * W * H)
Lead length(approx. ):0.8inch/21mm,
Lead diameter(approx. ): 0.026 inch/0.65mmPer Piece,
Weight(approx. ):0.18oz/5g
PACKAGE CONTENT: 5 x Cement Resistors
₹55.00 (excl. GST)Resistor 5 Watt 5 Ohm Resistance Axial Lead Ceramic Cement Power Resistor
₹55.00 (excl. GST) -
Resistor Kit 150 Pieces 30 Values 1/4W for Electronics DIY
- Carbon film assorted resistors
- 30 values
- Quantity: 150 pieces (5 each)
- Tolerance: 5%
- Power Rating: 0.25 wat
₹150.00 (excl. GST)Resistor Kit 150 Pieces 30 Values 1/4W for Electronics DIY
₹150.00 (excl. GST) -
Resistor Kit-560pcs 56 Values
Resistor Kit-560pcs
Specification
Type: Carbon Film Resistor
Material: Carbon Film
Power Rating: 1/4W
Resistance Value: 1R~10MΩ (56 Values)
Resistance Tolerance: 5%
Total Length(Approx.): 60mm/2.36-inch
Package List: 560pcs (10pcs*56 values) x Carbon Film Resistors₹250.00 (excl. GST)Resistor Kit-560pcs 56 Values
₹250.00 (excl. GST) -
RF Wireless Transmitter Receiver Module (Green)
- Operating voltage: 5V.
- Quiescent Current: 4mA.
- Receiving frequency: 315MHz.
- Receiver sensitivity: -105 dB.
- Communication Distance (m): 20 ~ 200 meter.
