No products in the cart.
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)
Proto Shield Prototype expansion board for Arduino UNO
Features:
Power rails down the middle and sides
A reset button and an extra general use button
2x 3mm general use LEDs, red and green, as well as 2 matching resistors
A pass-thru ICSP stacking header so you can stack any kind of shield on top, and/or use an AVR programmer
A surface-mount chip area for up to 14 SOIC size parts
Compatible with tiny breadboards
Every pin is brought out
Gold plated pads₹82.00₹90.00(Price is Exclusive of GST)Proto Shield Prototype expansion board for Arduino UNO
₹82.00₹90.00(Price is Exclusive of GST)MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection
- Using high-quality dual-panel design, with power indicator and TTL signal output instructions.
- The switching signal having a DO (TTL) output and analog output AO.
- TTL output valid signal is low.
- The higher the voltage, the concentration of the analog output voltage is higher.
- A hydrogen gas detection with good sensitivity.
- Has a long life and reliable stability
₹80.00 (Price is Exclusive of GST)MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection
₹80.00 (Price is Exclusive of GST)
6x15x5 696ZZ Stainless Steel Shielded Miniature Bearings – 4Pcs
The 6x15x5 696ZZ Bearings protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan.
Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
₹80.00 (Price is Exclusive of GST)6x15x5 696ZZ Stainless Steel Shielded Miniature Bearings – 4Pcs
₹80.00 (Price is Exclusive of GST)Tensioner Torsion Spring for GT2 6MM Timing Belt-5Pcs
Features:
- Maintain optimal belt tension to ensure high-quality prints every time.
- it is compatible with 6mm GT2 timing belts.
- It will absorb belt vibration.
- It can be mounted on top of the belts and requires no removal.
₹80.00 (Price is Exclusive of GST)Tensioner Torsion Spring for GT2 6MM Timing Belt-5Pcs
₹80.00 (Price is Exclusive of GST)0.28inch 0-100V Three Wire DC Mini Voltmeter Display Green
- Don’t compromise best price and high quality
- Package Includes :- 1pcs voltmeter
- Operating Voltage: 0-100 VDC
- this voltmeter will automatically move the decimal point’s position according to the different measuring voltage
- It is a 3-wire display.
₹80.00 (Price is Exclusive of GST)0.28inch 0-100V Three Wire DC Mini Voltmeter Display Green
₹80.00 (Price is Exclusive of GST)Solder Suction Tin Pump
- Metal body
- High suction power
- Teflon nozzle
- Easily replaceable nozzle
- Easy to clean and maintain
₹80.00 (Price is Exclusive of GST)Solder Suction Tin Pump
₹80.00 (Price is Exclusive of GST)Propeller Pair-10X4.5 Inch Carbon Nylon
- Length: 10″.
- Pitch: 4.5″.
- Weight: 30 gm.
- Shaft Diameter: 7.7 mm.
- Total Length: 10 inch / 250 mm
- Material: Carbon Fiber
₹80.00 (Price is Exclusive of GST)Propeller Pair-10X4.5 Inch Carbon Nylon
₹80.00 (Price is Exclusive of GST)BMS 4 Series 14.8V 18650 Lithium Battery Equalization Board
- Type: Voltage Regulator
- Supply Voltage:14.8V/16.8V
- Dissipation Power:18650 Lithium Battery Balanced Function Board
- Operating Temperature: Discharge Shunt balanced 4.2V 66mA
₹79.00 (Price is Exclusive of GST)BMS 4 Series 14.8V 18650 Lithium Battery Equalization Board
₹79.00 (Price is Exclusive of GST)DHT11 Digital Temperature And Humidity Sensor
The DHT-11 has a temperature measurement range of 0°C to 50°C with an accuracy of ±2°C
a humidity measurement range of 20% to 80% RH with an accuracy of ±5% RH.
the DHT-11 is an excellent choice for any electronics project that requires temperature and humidity sensing.
₹78.00 (Price is Exclusive of GST)DHT11 Digital Temperature And Humidity Sensor
₹78.00 (Price is Exclusive of GST)A4988 driver Stepper Motor Driver
Features :
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
₹78.00 (Price is Exclusive of GST)A4988 driver Stepper Motor Driver
₹78.00 (Price is Exclusive of GST)USBRS485 USB to Rs485 485 Converter Adapter
- Fully compliant USB 2.0 Standard, backward compatible with USB1.1
- Support system: windows xp, vista, windows 7, Linux, macos and wince5.0 Drive
- Supports baud rate range: 75bps 115200bps, up to 6mbps
₹76.00 (Price is Exclusive of GST)USBRS485 USB to Rs485 485 Converter Adapter
₹76.00 (Price is Exclusive of GST)ADC0809CCN-IC ADC 8BIT SAR 28DIP
ADC0809CCN
Reference Type :External
Voltage – Supply, Analog : 4.5V ~ 6.5V
Voltage – Supply, Digital : 4.5V ~ 6.5V
Features
-Operating Temperature : -40°C ~ 85°C
Package / Case : 28-DIP (0.600″, 15.24mm)
Supplier Device Package : 28-DIP
Mounting Type : Through Hole
₹75.00 (Price is Exclusive of GST)ADC0809CCN-IC ADC 8BIT SAR 28DIP
₹75.00 (Price is Exclusive of GST)
