-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST)
-
Arduino Mega 2560 R3 with USB Cable Compatible with Arduino
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
- Length:101.98mm/4.01in
- Width:53.63mm/2.11in
- Height:15.29mm/0.60in
₹850.00₹1,475.00(excl. GST)Arduino Mega 2560 R3 with USB Cable Compatible with Arduino
₹850.00₹1,475.00(excl. GST) -
₹850.00 (excl. GST)
W5100 Network Expansion Board Ethernet Shield
₹850.00 (excl. GST) -
3D Printer Filament – Multicolor PLA 1.75MM
- It is fed into the FDM 3D printer.
- It is extruded and deposited by an extrusion head onto a build platform where it cools.
- The process is continuous, building up layers to create the model.
₹850.00 (excl. GST)3D Printer Filament – Multicolor PLA 1.75MM
₹850.00 (excl. GST) -
Mini Sewing Machine – JYSM-202A
-Mini sewing machine offers double threads and perfect control of points
-Best view and more convenient in cutting the thread
-Small size, lightweight and with exquisite finish
-Equipped with a light lamp and a wire cutter, easy to cut the wires
-A large coil can be used with a rewind device for easy replacement of the bottom bobbin₹850.00₹950.00(excl. GST)Mini Sewing Machine – JYSM-202A
₹850.00₹950.00(excl. GST) -
BMS 24V 7S 20A Daly Waterproof BMS for Li-ion Cell (NMC) 25.9V
Features :
- Strong load ability, constant discharge current 10A~250A , use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.
- IC itself has power balancing function. The circuit is simple and reliable.
- Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable. long time short circuit of the load won’t affect the PCB and the battery. Temperature protection during charging and discharging.
- Extreme low power consumption. the consumption of the whole device is less than 50uA.
- PCB use high anti-corrosion, high water resistance, high impedance ESD conformal coating.
₹850.00 (excl. GST)BMS 24V 7S 20A Daly Waterproof BMS for Li-ion Cell (NMC) 25.9V
₹850.00 (excl. GST) -
₹865.00 (excl. GST)Sunflower kit in persuit of light (school science kit)
₹865.00 (excl. GST) -
3D Pen Professional for 3D Printing Drawing Pen with 3 x 1.75mm ABS/PLA Filament
- The 3D printing pen has an ergonomic design that makes it comfortable for users.
- The 3D pen is a perfect gift for kids because it is safe and eco-friendly.
- The 3D pen for professionals is compatible with both 1.75mm ABS & PLA Filament.
- It features a Fast boot setup in just 30 seconds. You can draw and create quickly.
- This 3D printing pen is perfect for working professionals like architects, designers and model makers.
₹890.00 (excl. GST)3D Pen Professional for 3D Printing Drawing Pen with 3 x 1.75mm ABS/PLA Filament
₹890.00 (excl. GST) -
Sim900A GSM Modem Module
- Quad-band 850/900/1800/1900MHz.
- GPRS class 2/10.
- Input Voltage : 9V-12V DC.
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set).
- Configurable baud rate.
- Built-in SIM Card holder.
- Built-in Network Status LED.
₹900.00 (excl. GST)Sim900A GSM Modem Module
₹900.00 (excl. GST) -
Stainless Steel Digital Vernier Caliper-150mm
- caliper type: digital calipers
- diy supplies: metalworking measurement range: 0-150mm
- good quality product
₹900.00 (excl. GST)Stainless Steel Digital Vernier Caliper-150mm
₹900.00 (excl. GST) -
37 in 1 Sensor Kit
37 in 1 Sensor Kit is a sensor kit with 37 different types of sensors. It can be used for various DIY projects and application according to the need.
₹950.00₹1,090.00(excl. GST)37 in 1 Sensor Kit
₹950.00₹1,090.00(excl. GST) -
Optical Fingerprint Reader R307 Sensor Module
- Integrated image collecting and algorithm chip together, ALL-in-One
- Low power consumption, small size, excellent performance. Please be informed that the product required prior knowledge regarding the usage.
- Good image processing capabilities can successfully capture an image up to resolution 500 dpi.
- Fingerprint reader can conduct secondary development, can be embedded into a variety of end products
- Professional optical technology, precise module manufacturing techniques.
₹950.00₹1,050.00(excl. GST)Optical Fingerprint Reader R307 Sensor Module
₹950.00₹1,050.00(excl. GST) -
Stanley STHT62511-8 9-way Screwdriver
Stanley STHT62511 Screwdriver are essential tools to carry out many of your household activities such as repairing and fixing. From assembling furniture to fixing up an old machine, it is used in fixing a number of things. STANLEY tools provides a set of 9 screwdriver set in different sizes which will come in handy for your house hold repairing needs.
₹950.00 (excl. GST)Stanley STHT62511-8 9-way Screwdriver
₹950.00 (excl. GST)
