-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹638.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹638.00(Price is Exclusive of GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹264.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹264.00 (Price is Exclusive of GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (Price is Exclusive of GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹207.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹207.00 (Price is Exclusive of GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)
-
MG90S Metal Geared Micro Servo Motor
Applications:
Used as actuators in many robots like Biped Robot, Hexapod, robotic arm etc..
Commonly used for steering system in RC toys
Robots where position control is required without feedback
Less weight hence used in multi DOF robots like humanoid robots
Can be used in DIY Kit for hobby projects₹155.00 (Price is Exclusive of GST)MG90S Metal Geared Micro Servo Motor
₹155.00 (Price is Exclusive of GST) -
1-8S Lipo Battery Voltage Tester
Features :
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- It has a mode button at the top for setting the desired voltage value.
₹154.00 (Price is Exclusive of GST)1-8S Lipo Battery Voltage Tester
₹154.00 (Price is Exclusive of GST) -
Orange A Grade IFR22650 3.2V 2000mAh 3C LiFePO4 Battery
- Shape:Â Cylindrical Battery
- Battery Type: LiFePO4 Battery
- High performance and capacity
- Flat top to suit many devices fitting
- Suitable for portable devices
₹152.00 (Price is Exclusive of GST)Orange A Grade IFR22650 3.2V 2000mAh 3C LiFePO4 Battery
₹152.00 (Price is Exclusive of GST) -
XL4016E1 200W Step Down Power Supply Module
XL4016E1
- Input voltage: 4-40VDC,
- Output voltage: (1.25-36V) continuously adjustable (recommended load debugging).
- Efficiency: 94%
- Output current: 8A(max)
- Output Power: 200W (max)
₹150.00 (Price is Exclusive of GST)XL4016E1 200W Step Down Power Supply Module
₹150.00 (Price is Exclusive of GST) -
6200ZZ Bearing 10x30x9 Shielded Miniature Ball Bearings
6200ZZ Bearing
- Model:Â 6200ZZ
- Inside diameter: 10 mm.
- Outside diameter: 30 mm.
- Width: 9 mm.
- Weight: 118 gm. (Each has 29.5 gm).
₹150.00 (Price is Exclusive of GST)6200ZZ Bearing 10x30x9 Shielded Miniature Ball Bearings
₹150.00 (Price is Exclusive of GST) -
Mini Solar Powered Toy Car
- DIY Mini Solar Powered Toy Car Kit For Children Educational Gadget Hobby Funny
- Material: ABS, metal
- Net Weight: 35g
- Product size: 8 x 7.5 x 3.2cm
- Solar panel: 1V, 80mA
- Dimensions and Weight:8.00 x 7.50 x 3.20 cm / 3.15 x 2.95 x 1.26 inches
₹150.00₹170.00(Price is Exclusive of GST)Mini Solar Powered Toy Car
₹150.00₹170.00(Price is Exclusive of GST) -
₹150.00 (Price is Exclusive of GST)
Rubber Band Powered Aircraft Model Kits Toy
₹150.00 (Price is Exclusive of GST) -
150W DC-DC Boost Converter 10-32V to 12-35V 6A Step-Up Adjustable Power Supply
Features :
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
- Easy to drive 65W 90W dual-core notebook.
- The output voltage is continuously adjustable on OUT+ and OUT- screw terminals (Output voltage must be greater than input voltage)
₹150.00 (Price is Exclusive of GST)150W DC-DC Boost Converter 10-32V to 12-35V 6A Step-Up Adjustable Power Supply
₹150.00 (Price is Exclusive of GST) -
12V 2A DC Power Adapter
- Universal
- Power Consumption: 60 W
- Power Cord Included
₹150.00 (Price is Exclusive of GST)12V 2A DC Power Adapter
₹150.00 (Price is Exclusive of GST) -
Resistor Kit 150 Pieces 30 Values 1/4W for Electronics DIY
- Carbon film assorted resistors
- 30 values
- Quantity: 150 pieces (5 each)
- Tolerance: 5%
- Power Rating: 0.25 wat
₹150.00 (Price is Exclusive of GST)Resistor Kit 150 Pieces 30 Values 1/4W for Electronics DIY
₹150.00 (Price is Exclusive of GST) -
4 Channel 12V Relay Module with Optocoupler
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
₹150.00 (Price is Exclusive of GST)4 Channel 12V Relay Module with Optocoupler
₹150.00 (Price is Exclusive of GST) -
HC-05 Bluetooth Module
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2
- Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution
- Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes
₹150.00 (Price is Exclusive of GST)HC-05 Bluetooth Module
₹150.00 (Price is Exclusive of GST)
