-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(excl. GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (excl. GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST)
- “1K ohm Resistor (Pack of 5)” already exists in your wishlist
-
Waveshare 320×240 Resistive Touch LCD Display (2.8 Inch)
Features:
- Onboard touch controller, smoother touch experience than solutions that directly use AD pins for touching.
- SPI interface requires a few pins.
- Programmable backlight control, power saving.
- Comes with development resources and a manual (examples for STM32/AVR/PIC).
₹1,220.00 (excl. GST)Waveshare 320×240 Resistive Touch LCD Display (2.8 Inch)
₹1,220.00 (excl. GST) -
6 Flexible Arms Soldering Station With Swiveling Alligator Clip
Features :
- Built-in Trays for components and screws.
- 6 flexible arms each with a large swiveling alligator clip.
- 6+1 pockets in beautifully base to hold loose components.
- 6 Silicon clip tips for the ultimate heat resistance.
- 6 Removable feet for a stable standalone operation.
- Integrates perfectly with Panavise vices and base mounts.
₹1,249.00₹1,500.00(excl. GST)6 Flexible Arms Soldering Station With Swiveling Alligator Clip
₹1,249.00₹1,500.00(excl. GST) -
Drill Work Station
- High performance; Drill Depth:2inches. Contents: 1 workstation
- Easy to use
- Warranty – 1 year from the date of invoice (provide invoice copy to claim warranty)
- Please Note : The package does not contain machine
₹1,250.00 (excl. GST)Drill Work Station
₹1,250.00 (excl. GST) -
Orange 11.1V 1300mAh 30C 3S Lithium Polymer Battery Pack
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹1,250.00₹1,299.00(excl. GST)Orange 11.1V 1300mAh 30C 3S Lithium Polymer Battery Pack
₹1,250.00₹1,299.00(excl. GST) -
Otto Wheel Based Robot Kit for Robotics Learning
- Part Reference: Otto DIY Bot Wheel Based
- Application: For Robotics Learning
- Color: Varies and not constant as per image
- Structure Type: 3D Printed
- Microcontroller: Arduino Nano V3
₹1,250.00 (excl. GST)Otto Wheel Based Robot Kit for Robotics Learning
₹1,250.00 (excl. GST) -
Bms 13S 40A 48V Waterproof Protection Circuit Module
- 13S 48V BMS
- Discharging current – 40A
- Charging current – 20 A
- Waterproof.
₹1,250.00 (excl. GST)Bms 13S 40A 48V Waterproof Protection Circuit Module
₹1,250.00 (excl. GST) -
MK3 Ultron Arduino Based Development Board
MK3 Ultron Arduino Based Development Board
The MK3 Utron Arduino Board is a specialized, high-quality Arduino-based development board designed for a variety of electronic projects and educational purposes. Made in India, this board features the robust ATmega 328P microcontroller, ensuring reliable performance for both DIY enthusiasts and professionals. It comes with an integrated motor driver, making it perfect for robotics and automation projects.
The MK3 Utron Arduino Board  includes a built-in buzzer and power pins, enhancing its functionality. The fastest bootloader ensures quick and efficient start-up times. Additionally, the Type-C cable provided makes programming straightforward and convenient.
₹1,250.00 (excl. GST)MK3 Ultron Arduino Based Development Board
₹1,250.00 (excl. GST) -
Orange 11.1V 1800mAh 30C 3S Lithium Polymer Battery Pack
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹1,257.00 (excl. GST)Orange 11.1V 1800mAh 30C 3S Lithium Polymer Battery Pack
₹1,257.00 (excl. GST) -
Waveshare 12-bit I2C 16-Channel Servo Driver for micro: bit
Features of I2C 16-Channel Servo Driver:
- micro: bit edge connector, directly pluggable
- I2C controlled, using only 2 pins
- Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)
- Integrates 5V regulator, up to 3A output current, can be powered from the battery through VIN terminal
- Standard servo interface supports commonly used servo such as SG90, MG90S, MG996R, etc.
- Reserved I2C control pins, allows working with other control boards
- Comes with development resources and manual (micro: bit graphical examples like Bluetooth/2.4G wireless remote control)
₹1,257.00 (excl. GST)Waveshare 12-bit I2C 16-Channel Servo Driver for micro: bit
₹1,257.00 (excl. GST) -
Ninja Robot Kit (Otto Bot) for Robotics Project
- Part Reference: Otto DIY Bot
- Application: For Robotics Learning
- Color: Varies and not constant as per image
- Structure Type: 3D Printed
₹1,340.00 (excl. GST)Ninja Robot Kit (Otto Bot) for Robotics Project
₹1,340.00 (excl. GST) -
Orange Lithium Polymer Battery Pack 1800mAh 3S 40C/80C (11.1V)
Precautions :
- Avoid over-charging or over-discharging the batteries.
- Do n0t put it beside the high-temperature condition.
- Don’t throw it into the fire or Water
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹1,345.00 (excl. GST)Orange Lithium Polymer Battery Pack 1800mAh 3S 40C/80C (11.1V)
₹1,345.00 (excl. GST) -
Otto Humanoid Robot Kit For Robotics Learning
- Part Reference: Otto DIY Bot
- Application: For Robotics Learning
- Color: Varies and not constant as per image
- Structure Type: 3D Printed
₹1,350.00 (excl. GST)Otto Humanoid Robot Kit For Robotics Learning
₹1,350.00 (excl. GST)
