No products in the cart.
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹390.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST)
Wire Clipper Nipper
Suitable for dressing components on printed circuit boards. Handles made out of ABS plastics. Diagonal cutters have intersecting jaws that cut the wire at an angle, leaving a flat tip.
₹65.00 (Price is Exclusive of GST)Wire Clipper Nipper
₹65.00 (Price is Exclusive of GST)TP4056 1A Li-ion Lithium Battery Charging Module Charging Board Charger Micro USB
- Input interface: Mini USB.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.2V.
- Full charge voltage: 4.2V.
- Battery over-current protection: 3 A
- The battery Undervoltage protection: 2.5 V
₹30.00 (Price is Exclusive of GST)TP4056 1A Li-ion Lithium Battery Charging Module Charging Board Charger Micro USB
₹30.00 (Price is Exclusive of GST)Soldering Iron Stand
- Heavy-duty base to uphold the weight of Soldering iron 25W or lesser
- Nickel-plated spring holder
- Spring holder provides substantial room for holding the soldering iron support
₹55.00 (Price is Exclusive of GST)Soldering Iron Stand
₹55.00 (Price is Exclusive of GST)Solder Tin Wire Spool Reel 50 Gram
- Rosin Core Solder
- Minimum Resistance
- No Additional Flux or paste is required
- No dry Solder
- Low Melting Point
- Widely applied in electrical repairs
- Easy to use, flows well and heats evenly.
- With the solder wire reel, soldering can be accomplished quickly.
₹105.00 (Price is Exclusive of GST)Solder Tin Wire Spool Reel 50 Gram
₹105.00 (Price is Exclusive of GST)Solder Suction Tin Pump
- Metal body
- High suction power
- Teflon nozzle
- Easily replaceable nozzle
- Easy to clean and maintain
₹80.00 (Price is Exclusive of GST)Solder Suction Tin Pump
₹80.00 (Price is Exclusive of GST)SMPS Adaptor of 24V 2.5Amps
- Material: Plastic
- Colour: Black
- Dimensions (L x B x H): 6.5 cm x 3.5 cm x 10 cm
- Weight: 120 g
- Package Contents: 1 RO Water Purifier SMPS
- Warranty: 6 Months Seller Warranty on Manufacturing Defects
- Care Instructions: Check specifications before use
₹610.00 (Price is Exclusive of GST)SMPS Adaptor of 24V 2.5Amps
₹610.00 (Price is Exclusive of GST)Prototype PCB Vero Perforated Board
Size 4 x 4 inch Voltage 12 V DC Operating Temperature -20 to 50 Degree C Rated Pressure 15 kPA 9 Volt Power Adaptor Single Pin 1 Amps
- Material: Plastic
- Colour: Black
- Dimensions (L x B x H): 6.5 cm x 3.5 cm x 10 cm
- Weight: 120 g
- Warranty: 6 Months Seller Warranty on Manufacturing Defects
- Care Instructions: Check specifications before use
₹90.00 (Price is Exclusive of GST)9 Volt Power Adaptor Single Pin 1 Amps
₹90.00 (Price is Exclusive of GST)Power Adaptor Dual Pin 9 Volt 1 Amps
- AC Input Voltage: 100 ~ 240 V.
- Output Voltage(V): 9.
- Output Current (Amp): 1.
- Rated Frequency (Hz): 50 – 60.
- Cable Length: Approx 1.1m
₹90.00 (Price is Exclusive of GST)Power Adaptor Dual Pin 9 Volt 1 Amps
₹90.00 (Price is Exclusive of GST)18650 Li-Ion Rechargeable Battery – 3.7V 3000mAH
Features:
1. High quality and durable
2. Provide excellent continuous power sources to your device
3. High energy density, large capacity and long life battery
4. No memory effect, recharge up to many times
5. Rechargeable type and professional design, safe and convenient to use₹125.00 (Price is Exclusive of GST)18650 Li-Ion Rechargeable Battery – 3.7V 3000mAH
₹125.00 (Price is Exclusive of GST)Li-Ion Rechargeable 2S Battery – 7.4V 2200mAH
1. High quality and durable
2. Provide excellent continuous power sources to your device
3. High energy density, large capacity and long life battery
4. No memory effect, recharge up to many times
5. Rechargeable type and professional design, safe and convenient to use₹190.00 (Price is Exclusive of GST)Li-Ion Rechargeable 2S Battery – 7.4V 2200mAH
₹190.00 (Price is Exclusive of GST)9V Watt Battery
- Constant 9V Output till lasts.
- Metal Jacket Body.
- Easy to install and Replace
- Pack of 2 Battery.
₹18.00 (Price is Exclusive of GST)9V Watt Battery
₹18.00 (Price is Exclusive of GST)
