No products in the cart.
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST)UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(excl. GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST)4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (excl. GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (excl. GST)
- “Dual Channel Digital Power Board XH-M543, DC12-26V 2x120W DIY Module High Power Stereo Amp Board for Car Vehicle Computer Speaker DIY Home Theater Audio System” already exists in your wishlist
DC 12V High Pressure Water Pump 100 PSI – 5.0L/min
- 100% Brand Bew And High Quality.
- Compact And Lightweight, Easy To Install.
- DC 12V High Pressure Water Pump with Pressure Switch.
- Made From Practical Material , Which Guarantees A Longer Lifespan.
- Multi-Purpose: Home Use For Garden Sprinklers, Shower, Water Taps In The Boat, Caravan Or Motor.
₹450.00 (excl. GST)DC 12V High Pressure Water Pump 100 PSI – 5.0L/min
₹450.00 (excl. GST)Castor wheel with steel ball
- Dimensions: 22 x 15 mm (Diameter x Height)
- Weight: 10 gm
- Body Case Material: Plastic
- Ball Material: 304 Stainless Steel
- Application: for MiniQ robot
₹20.00 (excl. GST)Castor wheel with steel ball
₹20.00 (excl. GST)Propeller Pair-10X4.5 Inch Carbon Nylon
- Length: 10″.
- Pitch: 4.5″.
- Weight: 30 gm.
- Shaft Diameter: 7.7 mm.
- Total Length: 10 inch / 250 mm
- Material: Carbon Fiber
₹80.00 (excl. GST)Propeller Pair-10X4.5 Inch Carbon Nylon
₹80.00 (excl. GST)Brushless Motor – A2212
- Motor KV: 1000
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
- Prop Adapter is quality tested before shipping to customers.
Brushless Motor Speed Controller ESC 30A
- Constant Current: 30A (Max 40A<10s).
- BEC: 5V 3A.
- Input Voltage: 11.1 ~ 11.7 V.
- Li-Po battery: 2S ~ 3S.
- Ni-MH 4-10 CELLS Auto Detect.
₹300.00 (excl. GST)Brushless Motor Speed Controller ESC 30A
₹300.00 (excl. GST)BO Motor Wheel
- Tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Blue
₹9.00 (excl. GST)BO Motor Wheel
₹9.00 (excl. GST)716 Hollow Cup Coreless Motor with Propeller – Set of 2
Features:
- 716 Coreless motor is a High Speed and Low Torque motor.
- Less noisy operation.
- Offers low resistance.
- They are equipped with high-quality magnets.
- This coreless motor supports a 1S battery.
₹180.00 (excl. GST)716 Hollow Cup Coreless Motor with Propeller – Set of 2
₹180.00 (excl. GST)4WD Smart Robot Car Acrylic Chassis Kit
Features:
Very handy and simple in assembling/disassembling.
Strong components to withstand extreme terrain conditions.
Transparent Car Acrylic Chassis.
Attractive design.₹450.00 (excl. GST)4WD Smart Robot Car Acrylic Chassis Kit
₹450.00 (excl. GST)- ₹490.00 (excl. GST)
4-Axis Multi-Rotor Quadcopter Frame – F450
₹490.00 (excl. GST) 2WD Smart Robot Car Acrylic Chassis Kit
- Outline Size: 135 x 135 x 80mm
- The round acrylic plate diameter: 130mm
- Another acrylic plate size: 135 x 75mm
₹250.00 (excl. GST)2WD Smart Robot Car Acrylic Chassis Kit
₹250.00 (excl. GST)- ₹850.00 (excl. GST)
W5100 Network Expansion Board Ethernet Shield
₹850.00 (excl. GST) TEC1 12706 Thermoelectric Cooler 6A Peltier Module
Features:
Colour: white
Material: plastic + ceramics
Rated voltage: 12v
Rated power: 50~72w₹200.00 (excl. GST)TEC1 12706 Thermoelectric Cooler 6A Peltier Module
₹200.00 (excl. GST)
