-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(excl. GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (excl. GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST)
-
Digital Non-Contact Infrared Forehead Thermometer Gun with Display
- Human body engineering design – strengthen his hand grip handle experience, and be convenient to measure
- Body temperature measurement: 32.0 43°c / 90 109.4°f ambient temperature measurement: 0-60°c / 32-140°f accuracy: (+ -) 0.2°c measurement distance: 1 to 15cm (within 5cm is the best) auto-shutdown time: about 7s power supply: 2 x 1.5v AAA batteries
₹1,500.00 (excl. GST)Digital Non-Contact Infrared Forehead Thermometer Gun with Display
₹1,500.00 (excl. GST) -
Outdoor Monocular Astronomical Telescope-F36050 360/50mm
- PERFECT TELESCOPE F36050 SET – Give your little one an exciting glimpse of the cosmos with the Techtest Telescope F36050 Kit for Children! The set includes a telescope, 3 magnification lenses (H20mm, H6mm, 1.5X), zenith mirror, and a tabletop tripod stand for a steady image while exploring the skies.
- PERFECT FOR BEGINNERS – Inspire your little one’s love for astronomical, expose them to the beauty of the universe, and give them a head start when it comes to identifying stars and constellations. Our telescope with stand produces clear images to act as an effective educational toy for kids.
₹1,500.00 (excl. GST)Outdoor Monocular Astronomical Telescope-F36050 360/50mm
₹1,500.00 (excl. GST) -
E88 Pro Drone
E88 Pro Drone
Brand Generic Model Name e88 pro Special Feature AUTO RETURN MOBILE APP CONTROL Age Range (Description) Kid Color black Video Capture Resolution 1080p Effective Still Resolution 8 Connectivity Technology Wi-Fi Included Components Battery Skill Level Beginner ₹1,500.00 (excl. GST)E88 Pro Drone
₹1,500.00 (excl. GST) -
Orange Metal Gear Digital Servo Motor -OT5330M 7.4V 35.5kg.cm 180°
Orange Metal Gear Digital Servo Motor
- Input Voltage Range (VDC): 4V-8.4V
- Rated Torque: 35.5Kg.cm @ 7.4V
- Gears Type: Steel Metal
- Connector: JR
- Command Signal: PWM
- Size (L x W x H) mm: 55 x 20 x 43
₹1,500.00 (excl. GST)Orange Metal Gear Digital Servo Motor -OT5330M 7.4V 35.5kg.cm 180°
₹1,500.00 (excl. GST) -
Lemon Lithium Polymer Battery Pack 1800mAh 3S 25C/50C
Features:
- Guaranteed leak proof operation in any position except inverted
- The expected life span of two to three years in float service applications
- Operation in a broad range of ambient temperatures
- Recovery capabilities even after deep discharges
- Compact, quick and simple to install, require low maintenance
₹1,520.00 (excl. GST)Lemon Lithium Polymer Battery Pack 1800mAh 3S 25C/50C
₹1,520.00 (excl. GST) -
3.5″ Touch Screen LCD Raspberry Pi Display
Features:
- Designed for Raspberry Pi, an ideal alternative solution for HDMI monitor
- Supports all revision of Raspberry Pi (directly-pluggable models)
- Works with Raspbian/Ubuntu directly
- Comes with a full set of screws and nuts for assembly
- 320×480 resolution, better display
- Lightweight and easy to install
₹1,580.00 (excl. GST)3.5″ Touch Screen LCD Raspberry Pi Display
₹1,580.00 (excl. GST) -
Original ARDUINO NANO 33 BLE Board (Without Header)
Bluetooth and BLE
The communications chipset on the Nano 33 BLE can be both a BLE and Bluetooth client and host device. Something pretty unique in the world of microcontroller platforms. If you want to see how easy it is to create a Bluetooth central or a peripheral device, explore the examples at our Arduino BLE library.
Features:
- 9 axis inertial sensor: what makes this board ideal for wearable devices
- humidity, and temperature sensor: to get highly accurate measurements of the environmental conditions
- barometric sensor: you could make a simple weather station
- microphone: to capture and analyze sound in real-time
₹1,592.00₹2,999.00(excl. GST)Original ARDUINO NANO 33 BLE Board (Without Header)
₹1,592.00₹2,999.00(excl. GST) -
Orange Lithium Polymer Battery Pack 3300mAh 2S 25C/50C (7.4V)
Safety Precautions :
- Avoid over-charging or over-discharging the batteries.
- Do n0t put it beside the high-temperature condition.
- Don’t throw it into the fire or Water
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹1,595.00 (excl. GST)Orange Lithium Polymer Battery Pack 3300mAh 2S 25C/50C (7.4V)
₹1,595.00 (excl. GST) -
Lemon Lithium Polymer Battery Pack 1800mAh 3S 45C/90C
Features:
- Guaranteed leak proof operation in any position except inverted
- The expected life span of two to three years in float service applications
- Operation in a broad range of ambient temperatures
- Recovery capabilities even after deep discharges
- Compact, quick and simple to install, require low maintenance
₹1,600.00 (excl. GST)Lemon Lithium Polymer Battery Pack 1800mAh 3S 45C/90C
₹1,600.00 (excl. GST) -
HX770 Vmax Aircraft 6-AXIS GYRO QUADCOPTER Drone
- HX770 GYRO QUADCOPTER Drone toy Quadcopter Material: ABS, metal Item size: 17*17*4.5 cm Frequency: 2.4G Quadcopter weight(with battery): 33g Flying Height: 30 meters max Controlling distance: 30 meters
- Battery for controller: 4*”AA” batteries(not included) Battery for quadcopter: 3.7V 220mAh Li-poly
- Charging Time: about 30 minutes
- Flying time: about 6-9 minutes For customer satisfaction, each piece is quality tested against any manufacturing defect, Note that it is a delicate product may need practice for best control. Important Note: Only for 14+ age, must be used in Adults Supervision.
- Function: 360-degree flips in all directions, fancy rotation, different speed mode, fantasy light Package Contents: 1 x HX 770 toy Drone 1 x 3.7V 220mAH battery 1 x Transmitter 2 x Propeller 1 x Manual.
- 360° Roll-Over: The simple flying of WSAD is too boring, and the new 3D rolling special effects surprise all the people.
- 6 Channel Stable Remote-Control Quadcopter Drone, Very Fun To Fly And Has A Great Control On The Copter.
₹1,600.00₹1,980.00(excl. GST)HX770 Vmax Aircraft 6-AXIS GYRO QUADCOPTER Drone
₹1,600.00₹1,980.00(excl. GST) -
AD633JNZ IC ANALOG MULTIPLIER 8-DIP
AD633JNZ IC
1.The AD633 is a complete four-quadrant multiplier offered in low cost 8-lead SOIC and PDIP packages. The result is a product that is cost effective and easy to apply.
2.No external components or expensive user calibration are required to apply the AD633.
3.Monolithic construction and laser calibration make the device stable and reliable.
4.High (10 MΩ) input resistances make signal source loading negligible.
5.Power supply voltages can range from ±8 V to ±18 V. The internal scaling voltage is generated by a stable Zener diode; multiplier accuracy is essentially supply insensitive.
₹1,600.00 (excl. GST)AD633JNZ IC ANALOG MULTIPLIER 8-DIP
₹1,600.00 (excl. GST) -
Original Arduino Uno Rev3
The Original Arduino Uno Rev3 board is the first in a series of USB Arduino boards and the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Arduino index of boards.
₹1,625.00 (excl. GST)Original Arduino Uno Rev3
₹1,625.00 (excl. GST)
