-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
7432 Quad OR Logic Gate IC
- 4 OR gates in a 14-Pin DIP Package
- QUAD 2-INPUT POSITIVE OR GATE
- Outputs Directly Interface to CMOS, NMOS and TTL
- Voltage Rating: 2.0 to 6.0V
- Schmitt Trigger Action at All Inputs
₹12.007432 Quad OR Logic Gate IC
₹12.00 -
7408 Quad AND Logic Gate IC
Features and Specifications:
Operating voltage range: +4.75 to +5.25V
Recommended operating voltage: +5V
Maximum supply voltage:7V
Maximum current allowed to draw through each gate output: 8mA
TTL outputs
Low power consumption
Typical Rise Time: 18ns
Typical Fall Time: 18ns
Operating temperature:0C to 70C
Storage Temperature: -65C to 150C₹12.007408 Quad AND Logic Gate IC
₹12.00 -
7404 NOT Logic Gate IC
- IC 74LS04 can deliver -0.4 mA current when the output is high.
- It can deliver 16 mA current when the output is low.
- When the Vcc is 5V and the input signal is 5V then the IC draws 1 mA current.
- When the Vcc is 5V and the input signal is 2.7V then the IC draws 20 to 40 micro-ampere currents.
- When the Vcc is 5V and the input signal is 0.4V then the IC draws -1.6 mA current.
₹12.007404 NOT Logic Gate IC
₹12.00 -
6 Pin DPDT Push Switch Self Lock Switch-10pcs
- Switch type: Non-Momentary
- Small 7 x 7 mm. Size
- PCB through-hole mounting
- Maximum voltage DC30V
- Operating Current 0.1 A
₹40.00₹50.006 Pin DPDT Push Switch Self Lock Switch-10pcs
₹40.00₹50.00 -
555 Timer IC
- Timing from microseconds to hours
- A stable or monostable operation
- Adjustable duty cycle
- TTL compatible output can sink or source up to 200mA
₹6.00555 Timer IC
₹6.00 -
555 Timer based Electronics Project DIY Kit
- The component kit for engineering project consists of high quality products that are very important for prototyping and testing.
- These electronic kit component consists of assorted resistors, transistors, capacitors, diodes, breadboard, wires, buttons and switch.
- The collection of electronic components comes in very handy for both beginners and project enthusiasts.
₹495.00 -
4 Pin Tactile Micro Switch
- High precision mechanism design offers acute operation and long service life.
- Used in the fields of electronic products, household appliances and more.
- Feature momentary contact, 4 pins, round black push button, through hole mounting
- Size: 6 x 6 x 5mm. 4 Pin
₹2.00 -
2 Pin Tactile Micro Switch
- High precision mechanism design offers acute operation and long service life.
- Used in the fields of electronic products, household appliances and more.
- Feature momentary contact, 2 pins, round black push button, through hole mounting
- Size: 6 x 6 x 5mm. 2 Pin
₹1.50 -
Single 1×40 Row Male Breakable Pin Header Connector Berg Strip – 1 Piece
- Can be manually broken for the length needed.
- Connector: Pin Header
- Connector type: Pin Strips Male
- Number of pins: 40
- Right angled male berg strip.
₹2.50₹4.00 -
1X40 Right Angle Female Header Berg Strip
- Connector: Pin Header
- Connector type: Pin Strips female
- Number of pins: 40
- Pin Length: 12mm.
- Pitch: 2.54mm.
₹6.00₹7.001X40 Right Angle Female Header Berg Strip
₹6.00₹7.00 -
Micro USB 2.0 Cable Type A/B for Arduino Nano
- Up to 480 Mbps data transfer rate.
- USB Type: Type-A to Mini-B
- Weight: 15 gm
- Length: 30 cm
- Exclusively designed for Arduino boards.
₹18.00 -
USB 2.0 Cable Type A/B for Arduino UNO
- Fully compatible with the PC.
- Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
- Aluminum under mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
₹18.00
