-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
Orange Lithium Polymer Battery Pack 4200mAh 2S 35C/70C (7.4V)
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
Precautions :
- Avoid over-charging or over-discharge batteries
- Do not put it besides the high-temperature condition
- Don’t directly expose it into the fire
- Avoid the contact of water.
- Do not Short Circuit the battery Terminals
₹1,940.00 -
600VA/360Watt Uninterrupted Power Supply -UPS FPS-755
- Compact Design Line Interactive UPS with Load Capacity of 360Watts / 600VA. Output Frequency (sync to mains) : 47 – 63 Hz Sync to mains
- Three Battery Backed up and Surge Protected 6A, 2/3 Pin Output Indian Power Socket
₹2,000.00 -
LX-103 Light Meter Luxmeter, Measures Up-To 2,00,000 LUX/20,000 FC
Features Of HTC LX-103 Digital Lux Meter:
- Large Range up to 200000Lux
- Large LCD Display with Back Light and Bar Graph
- Auto Power Off
- MAX/MIN and Data Hold
₹2,015.00 -
Mega2560 R3 RAMPS 3D Printer Controller Board (1.4 MKS Gen L V1.0)
Pin Diagram:
Features:
1. Arduino MEGA compatible Atmega2560 and FT232 processors are compatible with all RAMPS class firmware
2. Firmware can have the same configuration as ramps1.4
3. Easy DISPLAY + SD-CARD connector, RepRapDiscount SmartController compatible pin header on board
4. Easy connect MKS TFT to AUX-1
5.3x temperature ADC connectors for thermistors
6.up 5 motor driver with A4982
7.4x PWM enable mosfet outputs voltage selector switch for Main Power. (Bed, Extruder0, Extruder1, Fans)
8.4 layers PCB, optimize heat dissipation.
9.6x end stop connectors with power supply Xmin / Xmax / Ymin / Ymax / Zmin / Zmax
10. Resettable fuse for short circuit.
₹2,022.00 -
Lemon Lithium Polymer Battery Pack 1800mAh 3S 75C/150C
Features:
- Guaranteed leak proof operation in any position except inverted
- The expected life span of two to three years in float service applications
- Operation in a broad range of ambient temperatures
- Recovery capabilities even after deep discharges
- Compact, quick and simple to install, require low maintenance
₹2,025.00 -
OTG Android 5.8G UVC AV Phone Receiver
OTG Android
- Model: ROTG01
- Name: UVC OTG FPV Receiver
- Channel: 150CH
- Power Supply: 5V(by smartphone)
- Connector: SMA Female
₹2,061.00OTG Android 5.8G UVC AV Phone Receiver
₹2,061.00 -
Nova PM Sensor SDS011 High Precision Laser pm 2.5 Air Quality Detection Sensor
Features:
- Accurate and Reliable: laser detection, stable, good consistency.
- Quick response: response time is less than 10 seconds when the scene changes.
- Easy integration: UART output (or IO output can be customized), fan built-in.
- High resolution: the resolution of 0.3ug/m3.
₹2,078.00 -
Electric Drilling and Grinding Large Tools Kit (72 pcs) – LX134MO
- Speed Control : 8000-30000 rpm
- Diameter extension :Â 0.5 to 3.2 mm
- Number of tools including chucks :Â 75 pcs
- Performance :Â 130W
- Weight milling : 0.5 kg
- Package weight :Â 1.8 kg
- Dimensions :Â 240 mm length
- Power : 230V / 50Hz
₹2,100.00 -
Raspberry Pi 3 Model A+
To Get Started You’ll Need:
- A micro SD card with NOOBS (see Software & OS tab)
- A high-quality 2.5A micro USB power supply, such as the official Raspberry Pi Universal Power Supply.
Software installation:
Beginners should start with the NOOBS (New Out Of Box Software) operating system installation manager, which gives the user a choice of the operating system from the standard distributions.
SD cards with NOOBS pre-installed should be available from any of our global distributors and resellers. Alternatively, you can download NOOBS.
Raspbian is the recommended operating system for normal use on a Raspberry Pi.
Find help with installing Raspbian on your Pi in our online Getting started guide.
You can browse basic examples to help you get started with some of the software available in Raspbian, find more detail about the Raspbian operating system, or read information on fundamental Linux usage and commands for navigating the Raspberry Pi and managing its file system and users.
₹2,199.00Raspberry Pi 3 Model A+
₹2,199.00 -
XBEE S2C 802.15.4 RF Modules
- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
₹2,250.00₹2,990.00XBEE S2C 802.15.4 RF Modules
₹2,250.00₹2,990.00 -
NEEMA 23-JK57HS112-4204-3.1N-m Round Type
Note :
- The Neema 23 3.1N-m Stepper motor dimensions and weight may have a ±2% error.
- Resonances can occur because of improper mounting.
- Not easy to operate at extremely high speeds.
Features :
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
₹2,365.00 -
BASIC NX3224T028 2.8″HMI LCD Touch Display
Features:
- 320 x 240 Resolution
- RGB 65K true to life colours
- TFT screen with integrated resistive touch panel
- 4 pin TTL serial interface
- 4M Flash memory for User Application Code and Data
- Onboard micro-SD card slot for firmware upgradation
- Visual Area: 57.6mm(L)×43.2mm(W)
- Adjustable Brightness: 0~180 nit, the interval of adjustment is 1%
- 5V65mA power consumption
- Compatible with Raspberry Pi A+, B+, Pi 2, Pi 3, Arduino.
- Certificates: CE/EMC, RoHS (certificates)
Software:
₹2,450.00
