-
Waveshare 4 Inch Resistive HDMI LCD Display 480×800
Features:
- 4inch IPS screen, 480×800 hardware resolution.
- Resistive touch control.
- Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 Model B or Pi Zero, which requires an HDMI cable).
- Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie).
- Also works as a computer monitor, in this case, the touch panel is unavailable and an HDMI cable is required.
- HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os).
- 3.5mm audio jack, supports HDMI audio output.
- The backlight can be turned off to lower power consumption.
₹2,490.00 (excl. GST)Waveshare 4 Inch Resistive HDMI LCD Display 480×800
₹2,490.00 (excl. GST) -
ORANGE TVS Transient Suppressor Clamp Type P6KE Diode Kit (200PCS )
Features:
- Used in the fields of electronic products, household appliances, and more.
-
High precision mechanism design offers acute operation and long service life.
-
Compact and lightweight, easy to carry and dismantling.
₹640.00 (excl. GST)ORANGE TVS Transient Suppressor Clamp Type P6KE Diode Kit (200PCS )
₹640.00 (excl. GST) -
Orange 100PCS Rectifier/Schottky Diode Kit
Features:
- Used in the fields of electronic products, household appliances, and more.
-
High precision mechanism design offers acute operation and long service life.
-
Compact and lightweight, easy to carry and dismantle.
₹240.00 (excl. GST)Orange 100PCS Rectifier/Schottky Diode Kit
₹240.00 (excl. GST) -
ORANGE 6mm Light Push Button Switch Kit-100PCS
Features:
- Through-hole design.
- Shaft Shape: Round
- Used in the fields of electronic products, household appliances, and more.
-
High precision mechanism design offers acute operation and long service life.
-
Compact and lightweight, easy to carry and dismantle.
-
Good electrical conductivity.
₹370.00 (excl. GST)ORANGE 6mm Light Push Button Switch Kit-100PCS
₹370.00 (excl. GST) -
Mega2560 R3 RAMPS 3D Printer Controller Board (1.4 MKS Gen L V1.0)
Pin Diagram:
Features:
1. Arduino MEGA compatible Atmega2560 and FT232 processors are compatible with all RAMPS class firmware
2. Firmware can have the same configuration as ramps1.4
3. Easy DISPLAY + SD-CARD connector, RepRapDiscount SmartController compatible pin header on board
4. Easy connect MKS TFT to AUX-1
5.3x temperature ADC connectors for thermistors
6.up 5 motor driver with A4982
7.4x PWM enable mosfet outputs voltage selector switch for Main Power. (Bed, Extruder0, Extruder1, Fans)
8.4 layers PCB, optimize heat dissipation.
9.6x end stop connectors with power supply Xmin / Xmax / Ymin / Ymax / Zmin / Zmax
10. Resettable fuse for short circuit.
₹2,022.00 (excl. GST)Mega2560 R3 RAMPS 3D Printer Controller Board (1.4 MKS Gen L V1.0)
₹2,022.00 (excl. GST) -
ESP WROOM 32 MCU Module Version: 1.1
The user may also power off the CPU and make use of the low-power coprocessor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32S integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SDIO/SPI, UART, and I²C.
Application :
- Universal low power IoT sensor hub.
- Home automation.
- Universal low power IoT recorder.
- Mesh network.
- Video streaming of the camera.
- Industrial wireless control.
- OTT TV box / set-top box device.
- Baby monitor.
- Smart Socket.
- Sensor networks.
- Wi-Fi toys: Counters, toys, Anti-lost device.
- Wearable electronic products.
- Wi-Fi speech recognition device.
- Wi-Fi location-aware devices.
Features :
- Integrated 520 KB SRAM.
- Hybrid Wi-Fi & Bluetooth.
- High level of integration.
- Ultra-low-power management.
- 4 MB Flash.
- On-board PCB antenna.
₹410.00 (excl. GST)ESP WROOM 32 MCU Module Version: 1.1
₹410.00 (excl. GST) -
STM32F401CCU6 Minimum System Board Microcomputer STM32 ARM Core Board
Features :
- 100% Brand new and high-quality STM32 Board
- 84 MHz work frequency.
- 256K flash memory,64K SRAM.
- 1.7-3.6V power, I/O.
- 4-26MHz crystal.
- Onboard the Type-C USB interface, you can give the board power supply and USB communication.
₹410.00 (excl. GST)STM32F401CCU6 Minimum System Board Microcomputer STM32 ARM Core Board
₹410.00 (excl. GST) -
₹4,573.00 (excl. GST)
TL866II Plus Universal Programmer Kit with 6 IC Adapters
₹4,573.00 (excl. GST) -
NEEMA 17-JK42HM48-1684-0.44N-m Round Type
Features :
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
₹1,010.00 (excl. GST)NEEMA 17-JK42HM48-1684-0.44N-m Round Type
₹1,010.00 (excl. GST) -
Lemon Lithium Polymer Battery Pack 3300mAh 3S 25C/50C
Features:
- Guaranteed leak proof operation in any position except inverted
- The expected life span of two to three years in float service applications
- Operation in a broad range of ambient temperatures
- Recovery capabilities even after deep discharges
- Compact, quick and simple to install, require low maintenance
₹2,870.00 (excl. GST)Lemon Lithium Polymer Battery Pack 3300mAh 3S 25C/50C
₹2,870.00 (excl. GST) -
NEEMA 23-JK57HS112-4204-3.1N-m Round Type
Note :
- The Neema 23 3.1N-m Stepper motor dimensions and weight may have a ±2% error.
- Resonances can occur because of improper mounting.
- Not easy to operate at extremely high speeds.
Features :
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
₹2,365.00 (excl. GST)NEEMA 23-JK57HS112-4204-3.1N-m Round Type
₹2,365.00 (excl. GST) -
Orange Lithium Polymer Battery Pack 4200mAh 2S 35C/70C (7.4V)
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
Precautions :
- Avoid over-charging or over-discharge batteries
- Do not put it besides the high-temperature condition
- Don’t directly expose it into the fire
- Avoid the contact of water.
- Do not Short Circuit the battery Terminals
₹1,940.00 (excl. GST)Orange Lithium Polymer Battery Pack 4200mAh 2S 35C/70C (7.4V)
₹1,940.00 (excl. GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale