-
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST)
-
Soldering Stand with Magnifying Glass and Helping Hand
*With two LED lighting ,this model can work very well in the dark environment.
*With 3 pcs of AAA batteries,large capacity,this model can continuously discharge more than 10 hours,expediently be used.
₹350.00 (excl. GST)Soldering Stand with Magnifying Glass and Helping Hand
₹350.00 (excl. GST) -
Soldering Tip- Chisel (Pack of 5)
Soldering Bit Material: Copper- Soldering Bit Type: Lead-free
- Soldering Bit Temperature Range: 200-480°
- Soldering Bit Shape: 5Pcs/Package (I+B+K+2.4D+3C)
- Soldering Bit Suitable for: soldering station
₹320.00 (excl. GST)Soldering Tip- Chisel (Pack of 5)
₹320.00 (excl. GST) -
Soldering Wick
The End Of A Length Of Braid Is Placed Over The Soldered Connections Of A Component Being Removed. The Connections Are Heated With A Soldering Iron Until The Solder Melts And Is Wicked Into The Braid By Capillary Action. The Braid Is Removed While The Solder Is
₹50.00 (excl. GST)Soldering Wick
₹50.00 (excl. GST) -
Solderless 400 pin breadboard – Normal Quality – Without Packing
Specifications and features:
- 400 tie points
- 1 Double strip, Total 300 tie points
- 2 Power lanes, Total 100 tie points in power lanes
- Perfect for Arduino shield prototyping and testing
- Plastic housing, metal contact clips
₹38.00₹58.00(excl. GST)Solderless 400 pin breadboard – Normal Quality – Without Packing
₹38.00₹58.00(excl. GST) -
Songle Single-channel 5V 30A Relay Module Power Failure Relay
- Trigger Voltage: 5VDC
- Switching Voltage: 250VAC@30A; 30VDC@30A
- The module can be set high level or low-level trigger by the jumper
₹148.00 (excl. GST)Songle Single-channel 5V 30A Relay Module Power Failure Relay
₹148.00 (excl. GST) -
SPDT ON-Off 3 Pin 2 Position Slide Switch 0.3A
- This is a mountable SPDT switch great for use as a general control switch. The pins are spaced by 3.7mm (0.14″).
- This switch has two handy 2mm mounting holes on each side of the actuator, making it easy to install while providing a discreet slide switch for your next project.
- It is rated for 300mA at 125VAC
₹4.00 (excl. GST)SPDT ON-Off 3 Pin 2 Position Slide Switch 0.3A
₹4.00 (excl. GST) -
Speed Measuring Sensor Groove Coupler Module For Arduino
Speed Measuring Sensor
- Using imported groove optical coupling sensor, width 5mm.
- It has the output state light, if output high level, the lights are off. if output low level, it on.
- If it covered, it will output high level; otherwise, its output low level.
- Good signal and waveform, with a strong driving ability for more than 15mA.
- Equipped with a fixed bolt hole, easy install.
- Use the LM393 wide voltage comparer.
₹29.00 (excl. GST)Speed Measuring Sensor Groove Coupler Module For Arduino
₹29.00 (excl. GST) -
SpeedyBee TX800 5.8GHz Video Transmitter
- Model: TX800
- Frequency Channel: 5.8GHz 48CH
- Video input impedance: 75 Ohm
- Antenna Connector: MMCX
₹2,800.00 (excl. GST)SpeedyBee TX800 5.8GHz Video Transmitter
₹2,800.00 (excl. GST) -
Stainless Steel Digital Vernier Caliper-150mm
- caliper type: digital calipers
- diy supplies: metalworking measurement range: 0-150mm
- good quality product
₹900.00 (excl. GST)Stainless Steel Digital Vernier Caliper-150mm
₹900.00 (excl. GST) -
Stanley 12 Pieces Spanner Set, 70-380E
- Anti-slip design on open end.
- Chrome Vanadium Steel.
- Matte Finsih.
₹650.00 (excl. GST)Stanley 12 Pieces Spanner Set, 70-380E
₹650.00 (excl. GST) -
STANLEY 66-052 Bi Material Handle Precision Screwdriver Set (6 Piece)
Bi-material handle design
Tips hardened to 53 HRC
Chrome vanadium steel blade with black oxide finish
Overall length 110mm
Set contains Philips No. 0,1, Slotted tip 1.4, 2.0, 2.4, 3.0mm₹550.00 (excl. GST)STANLEY 66-052 Bi Material Handle Precision Screwdriver Set (6 Piece)
₹550.00 (excl. GST) -
STANLEY 84-214-22 130mm/5.25” Wire Stripper (Black and Yellow)
FEATURES & BENEFITS
- Adjustable slide stop and hole designed for bending and looping wire
- Oil-resistant dipped handle allows for a comfortable grip
- Meets ANSI specifications
₹250.00 (excl. GST)STANLEY 84-214-22 130mm/5.25” Wire Stripper (Black and Yellow)
₹250.00 (excl. GST)
