-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
TL084 Quad JFET Input Operational Amplifier (Op-Amp) IC DIP
TL084 Quad Amplifier
Features:-
• Low Power Consumption: 1.4 mA/ch Typical
• Wide Common-Mode and Differential Voltage Ranges
• Low Input Bias Current: 30 pA Typical
• Low Input Offset Current: 5 pA Typical
• Output Short-Circuit Protection
• Low Total Harmonic Distortion: 0.003% Typical
• High Input Impedance: JFET Input Stage
• Latch-Up-Free Operation
• High Slew Rate: 13 V/μs Typical
• Common-Mode Input Voltage Range
• Includes VCC+
₹24.00 -
₹4,573.00
-
TLP250H – Optocoupler : Toshiba – Transistor Inverter Photo Coupler [Original]
TLP250H
- Series: TLP250
- Product Type: Logic Output Optocouplers
- Output Type: Push-Pull
- Number of Channels: 1 Channel
- Isolation Voltage: 3750 Vrms
- Fall Time: 50 ns
- Propagation Delay – Max: 500 ns
- If – Forward Current: 20 mA
- Vf – Forward Voltage: 1.57 V
- Vr – Reverse Voltage: 5 V
- Pd – Power Dissipation: 260 mW
- Minimum Operating Temperature: -40°C
- Maximum Operating Temperature: +125°C
- Mounting Style: Through Hole
- Package/Case: DIP-8
₹70.00 -
TLP350 Logic IC Output Optocoupler
TLP350
FeaturesÂ
-
Peak output current : IO = ±2.5A (max)
-
Guaranteed performance over temperature : −40 to 100°C
-
Supply current : ICC = 2 mA (max)
-
Power supply voltage : VCCÂ = 15 to 30 V
-
Threshold input current : IFLHÂ = 5 mA (max)
-
Switching time (tpLH/tpHL) : 500 ns (max)
-
Common mode transient immunity : 15 kV/μs
-
Isolation voltage : 3750 Vrms
-
Operating frequency 50 kHz
-
Storage temperature range Tstg -55 to 125 °C
-
Lead soldering temperature (1 0 s) Tsol 260 °C
₹70.00 -
-
TP4056 1A Li-ion Lithium Battery Charging Module Charging Board Charger Micro USB
- Input interface: Mini USB.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.2V.
- Full charge voltage: 4.2V.
- Battery over-current protection: 3 A
- The battery Undervoltage protection:Â 2.5 V
₹30.00 -
TPA3118 Mono Digital Amplifier Board 60W Home Audio Kit
Applicable speaker impedance: 4-8 ohm(8 ohm is the best). Specifications: Working Voltage: DC 8-24V Power Output: 60W Applicable Speaker Impedance: 4-8 ohm PCB Board Size: 45 * 35mm / 1.77 * 1.4in Weight: 50g / 0.43oz Package List: 1 * TPA3118 Digital Amplifier Board
₹255.00 -
Transistor Assorted Kit -(170pcs)
Transistor Kit
- TO-92Â
- S9012 S9013 S9014 S9015 S9018 A1015
- S8050 S8550 A42 A92 C1815
- 2N5401 2N5551 A733 C945 2N3904 2N3906
- 17 Vaues, Each 10pcs, Total 170pcs
₹130.00 -
Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino Mega 2560 R3
- Compatible with Arduino MEGA2560 R3 (unassemble).
- The cover can be adjusted.
- Color: Transparent.
- Material: Acrylic.
₹110.00 -
Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino UNO R3
- UNO Case is to enclose Development Board only.
- With screw copper pillar and installation instructions.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
- Simply Clicks Together Enclosure.
₹55.00 -
TS835 FPV 5.8G Wireless AV Transmitter – 600Mw 48Ch (2-6S)
TS835 FPV 5.8G Wireless AV Transmitter
1 x 48 CH AVTransmitter.1 x Power cable1 x A Removable Antenna₹1,450.00 -
TSOP IR Receiver for ARDUINO AVR
- Very low supply current
- Photo-detector and preamplifier in one package
- Internal filter for PCM frequency
- Improved shielding against EMI
- Supply voltage: 2.5 V to 5.5 V
- Improved immunity against ambient light
₹12.00
