-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST)
-
Ceramic Capacitor-220pF 1206 (Surface Mount Multilayer )- (Pack of 30)
Ceramic Capacitor-220pF 1206
- Capacitance: 220 pF
- Voltage: 50V
- Mounting type: SMD/SMT
- Operating temperature: -55ºC to 125ºC
- Supplied in tape on reel
- Nickel-barrier end termination
- RoHS compliant
- Halogen Free compliant
₹29.00 (excl. GST)Ceramic Capacitor-220pF 1206 (Surface Mount Multilayer )- (Pack of 30)
₹29.00 (excl. GST) -
E88 Pro Drone
E88 Pro Drone
Brand Generic Model Name e88 pro Special Feature AUTO RETURN MOBILE APP CONTROL Age Range (Description) Kid Color black Video Capture Resolution 1080p Effective Still Resolution 8 Connectivity Technology Wi-Fi Included Components Battery Skill Level Beginner ₹1,500.00 (excl. GST)E88 Pro Drone
₹1,500.00 (excl. GST) -
Speed Measuring Sensor Groove Coupler Module For Arduino
Speed Measuring Sensor
- Using imported groove optical coupling sensor, width 5mm.
- It has the output state light, if output high level, the lights are off. if output low level, it on.
- If it covered, it will output high level; otherwise, its output low level.
- Good signal and waveform, with a strong driving ability for more than 15mA.
- Equipped with a fixed bolt hole, easy install.
- Use the LM393 wide voltage comparer.
₹29.00 (excl. GST)Speed Measuring Sensor Groove Coupler Module For Arduino
₹29.00 (excl. GST) -
Hi-Link Switch Power Supply Module (HLK PM01 5V/3W)
Hi-Link Switch Power Supply Module
Environmental conditions:
- Technical indicators: Single bit
- Working temperature: – 20-60 +degree
- Storage temperature: + 80-40 -degree
- Relative humidity: 5-95%
- The cooling way: Natural cooling
- The atmospheric pressure: 80-106Kpa
- The altitude: 2000M or less.
₹161.00 (excl. GST)Hi-Link Switch Power Supply Module (HLK PM01 5V/3W)
₹161.00 (excl. GST) -
Pluto DIY Nano Drone Kit Pluto 1.2
Pluto DIY Nano Drone Kit Pluto 1.2
- Build your drone with available spares and open-source designs.
- Easy C++ API structure with open-source code.
- Start with simple “Alt Hold + Motion Control” and progress to advanced acrobatics.
- Created at IIT Bombay, made in India, and crash-resistant.
- Access open-source content and projects.
₹7,000.00 (excl. GST)Pluto DIY Nano Drone Kit Pluto 1.2
₹7,000.00 (excl. GST) -
ABS Plastic Landing Gear for Quadcopter (Pack of 4) – Made in INDIA
ABS Plastic Landing Gear for Quadcopter
- Color: Black
- Material: ABS Plastic
- Length: ~190mm
- Ground Clearance: 150 mm
- Compatibility: Q450 and S500 Frames
- Weight: 75 gm (total of 4)
₹132.00 (excl. GST)ABS Plastic Landing Gear for Quadcopter (Pack of 4) – Made in INDIA
₹132.00 (excl. GST) -
Tensioner Torsion Spring for GT2 6MM Timing Belt used in 3D Printer – 5Pcs
Tensioner Torsion Spring
5 x Tensioner Torsion Spring for GT2 6MM Timing Belt used in 3D Printer
₹40.00 (excl. GST)Tensioner Torsion Spring for GT2 6MM Timing Belt used in 3D Printer – 5Pcs
₹40.00 (excl. GST) -
Advanced Johnson/Mini Gear Motor L Clamp (Bracket)
Advanced Johnson/Mini Gear Motor L Clamp
- Material: Mild Steel
- Thickness: 1.5 mm
- Motor Mounting Hole: 3 mm
- Bracket Mounting Hole: 4 mm
- Weight: 34 gm
₹126.00 (excl. GST)Advanced Johnson/Mini Gear Motor L Clamp (Bracket)
₹126.00 (excl. GST) -
Radial Ball Bearing 625ZZ for 3D Printer/ Robot – 4Pcs
Radial Ball Bearing
- Model: 625ZZ
- Quality: ABEC-3
- Dimensions: 4.6x16x5 mm
- ID (inner diameter): 4.6mm
- OD (outer diameter): 16mm
- Thickness: 5mm
₹55.00 (excl. GST)Radial Ball Bearing 625ZZ for 3D Printer/ Robot – 4Pcs
₹55.00 (excl. GST) -
8mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP08
8mm Bore Inner Ball Mounted
- Type: KP08
- Material: zinc alloy
- Bore Diameter:8mm
- Mounting Hole Diameter: 5 mm
- Durable with high precision
- Can withstand great weight
₹83.00 (excl. GST)8mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP08
₹83.00 (excl. GST) -
606ZZ Bearing 6x17x6 Stainless Steel Shielded Miniature Bearings – 2 Pcs
606ZZ Bearing 6x17x6
- Model: 606ZZ
- Inside diameter (ID): 6 mm.
- Outside diameter (OD): 17 mm.
- Width: 6 mm.
- Weight: 5 gm (each)
₹42.00 (excl. GST)606ZZ Bearing 6x17x6 Stainless Steel Shielded Miniature Bearings – 2 Pcs
₹42.00 (excl. GST) -
696ZZ Bearing 6x15x5 Stainless Steel Shielded Miniature Bearings (4Pcs)
696ZZ Bearing 6x15x5
- Model: 696ZZ
- Inside diameter (ID): 6 mm.
- Outside diameter (OD): 15 mm.
- Width: 5 mm.
- Weight: 16 gm. (Each has 3 gm).
₹82.00 (excl. GST)696ZZ Bearing 6x15x5 Stainless Steel Shielded Miniature Bearings (4Pcs)
₹82.00 (excl. GST)
