-
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
Sanitizer Tunnel Kit DC Motor, SMPS, Nozzle and Pipe
The kit contains the below Parts:
1 Piece DC Motor of 24V
1 Piece SMPS Adaptor 24V 2.5Amps
1 Piece 6mm Diameter Output Pipe
1 Piece 10mm Diameter Input Pipe
5 Piece Brass Nozzle with Connector
Input Pipe Connectors₹3,500.00 (excl. GST)Sanitizer Tunnel Kit DC Motor, SMPS, Nozzle and Pipe
₹3,500.00 (excl. GST) -
Automatic Hand Sanitizer Dispenser with Ultrasonic Sensor – 8 Litre Capacity
Features:
Automatic Sensing
8 Liter Tank Capacity
Mist Spray for better output
Easy to Install, just need to plug and use
6 Months Manufacture Warranty
Works under Sunlight₹3,500.00 (excl. GST)Automatic Hand Sanitizer Dispenser with Ultrasonic Sensor – 8 Litre Capacity
₹3,500.00 (excl. GST) -
KK2.1.5 Flight Controller Board-Multi-Rotor LCD
- MCU : Atmega644 PA
- Gyro/Acc: MPU6050
- Auto-level: Yes
- Input Voltage: 4.8-6.0V
- AVR interface: standard 6 pin.
- Signal from Receiver: 1520us (5 channels).
- Signal to ESC: 1520us.
₹3,500.00 (excl. GST)KK2.1.5 Flight Controller Board-Multi-Rotor LCD
₹3,500.00 (excl. GST) -
Seed Studio Grove 6 Axis Accelerometer & Gyroscope (BMI088)
Features:
- The BM1088 is designed for drones, robotics and industrial applications with challenging performance requirements.
- Wide acceleration measurement range(up to 24g)
- The accelerometer features a low TCO of 0.2 mg/K and low spectral noise of only 230 pg/sqrt(Hz) in the widest measurement range of ± 24 g
₹3,595.00 (excl. GST)Seed Studio Grove 6 Axis Accelerometer & Gyroscope (BMI088)
₹3,595.00 (excl. GST) -
Lemon 5500mAh 3S 45C/90C Lithium Polymer Battery Pack
Features:
- Guaranteed leak proof operation in any position except inverted
- The expected life span of two to three years in float service applications
- Operation in a broad range of ambient temperatures
- Recovery capabilities even after deep discharges
- Compact, quick and simple to install, require low maintenance
₹3,602.00 (excl. GST)Lemon 5500mAh 3S 45C/90C Lithium Polymer Battery Pack
₹3,602.00 (excl. GST) -
DFRobot Gravity I2C Oxygen Sensor
Features:
- High sensitivity
- I2C Interface
- Compatible with both 3.3V and 5V micro-controllers
- Polarity protection
₹3,800.00 (excl. GST)DFRobot Gravity I2C Oxygen Sensor
₹3,800.00 (excl. GST) -
₹3,900.00 (excl. GST)
Flysky CT6B Remote 6 Channel Transmitter and Receiver
₹3,900.00 (excl. GST) -
Snap Circuits Jr. SC-100 Kit
- Dr. Toy 100 Best Children’s Products
- Dr Toy Best Educational Products
- Valuable component to a rounded STEM curriculum
- Build working models of a photo sensor
₹3,919.00 (excl. GST)Snap Circuits Jr. SC-100 Kit
₹3,919.00 (excl. GST) -
11.1V 5400mAH LiPo Battery
- This is a 11.1V LiPo battery pack with a capacity of 5400mAh.
- It produces a maximum charging rate of 5C and maximum discharging rate of 40C.
- Experts recommend to maintain a charging rate of 1-3C for the5400mAh LiPo battery.
- Suitable for most RC models such as remote control racing drone, helicopter, car, boat, etc.
- Compatible with balance charger. Package Included : 1 x 5400mah lipo Battery
₹4,000.00 (excl. GST)11.1V 5400mAH LiPo Battery
₹4,000.00 (excl. GST) -
RunCam Phoenix 2 Micro FPV Camera for Quadcopters
Features:
- New upgraded CPU for better performance
- High quality 6 layer glass lens for better picture
- Supports Image Mirror & Flip
- Low latency, high performance
- Excellent low light performance
₹4,060.00 (excl. GST)RunCam Phoenix 2 Micro FPV Camera for Quadcopters
₹4,060.00 (excl. GST) -
RunCam Phoenix 2 Nano Edition 1000 TVL FPV Camera
Features:
- 7G ƒ/2.0 big aperture glass lens. Less red lens flare
- Excellent Image Quality – in day or night!
- 1/2″ big image sensor
- f/2.0 aperture for more light
- Excellent low light performance
- Less digital image shimmer
- New upgraded CPU for better performance
- Better low light performance than even the RunCam Eagle!
- High quality 6 layer glass lens for better picture
- PAL/NTSC & 4:3/16:9 Switchable
- Supports Image Mirror & Flip
- Low latency, high performance
₹4,137.00 (excl. GST)RunCam Phoenix 2 Nano Edition 1000 TVL FPV Camera
₹4,137.00 (excl. GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale