No products in the cart.
Anycubic I3 MEGA S – FDM 3D Printer
Features:
Printing Platform: Strong adhesive when platform’s hot and easy to remove when cool down.
Filament Sensor: Provides better printing experience of flexible
Fast Assembly: Only need to install 8 screws and connect 3 wires before the first print.
Rigid Metal Frame: The structure is very stable which could reduce the body shake druing printing and improve the printing quality
Suspended Filament Rack: One-piece hanging design, simple and beautiful. The feeding of filament is smoother and the storage of filament is more convenint.₹14,500.00 (Price is Exclusive of GST)Anycubic I3 MEGA S – FDM 3D Printer
₹14,500.00 (Price is Exclusive of GST)XBEE S2C 802.15.4 RF Modules
- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
₹2,250.00₹2,990.00(Price is Exclusive of GST)XBEE S2C 802.15.4 RF Modules
₹2,250.00₹2,990.00(Price is Exclusive of GST)Sim900A GSM Modem Module
- Quad-band 850/900/1800/1900MHz.
- GPRS class 2/10.
- Input Voltage : 9V-12V DC.
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set).
- Configurable baud rate.
- Built-in SIM Card holder.
- Built-in Network Status LED.
₹900.00 (Price is Exclusive of GST)Sim900A GSM Modem Module
₹900.00 (Price is Exclusive of GST)SIM800L GPRS GSM Module
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
₹450.00 (Price is Exclusive of GST)SIM800L GPRS GSM Module
₹450.00 (Price is Exclusive of GST)RFID Card for Smart Access Control
Features:
- High security.
- The recorded content can be erased repeatedly.
- Can run away from the computer platform to achieve the Internet and offline automatic conversion mode of operation, to achieve a wide range of use, less wiring needs.
RF Wireless Transmitter Receiver Module (Red) – 433 MHz
Features:
- Transmitter Module employs a crystal-stabilized oscillator, ensuring accurate frequency control for best range performance
- Range in open space (Standard Conditions) : 100 Meters
- No requirement of external RF components except Antenna
- RX Supply Current: 3.5 mA. RX Typical Sensitivity: 105 Dbm
- Low Power Consumption
₹125.00 (Price is Exclusive of GST)RF Wireless Transmitter Receiver Module (Red) – 433 MHz
₹125.00 (Price is Exclusive of GST)RF Wireless Transmitter Receiver Module (Green)
- Operating voltage: 5V.
- Quiescent Current: 4mA.
- Receiving frequency: 315MHz.
- Receiver sensitivity: -105 dB.
- Communication Distance (m): 20 ~ 200 meter.
NodeMcu ESP8266 Based Wireless Development Module for IOT
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
MFRC-522 RC522 RFID Module
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- The low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Working current:13 – 26mA / DC 3.3V
- Standby current:10 – 13mA / DC 3.3V
- Sleep current:<80uA
- Peak current:<30mA
- Working frequency:13.56MHz
- Card reading distance :0~60mm (Mifare1 card)
₹125.00 (Price is Exclusive of GST)MFRC-522 RC522 RFID Module
₹125.00 (Price is Exclusive of GST)HC-05 Bluetooth Module
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2
- Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution
- Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes
₹170.00₹275.00(Price is Exclusive of GST)HC-05 Bluetooth Module
₹170.00₹275.00(Price is Exclusive of GST)Ublox NEO 6M GPS module
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
₹335.00₹490.00(Price is Exclusive of GST)Ublox NEO 6M GPS module
₹335.00₹490.00(Price is Exclusive of GST)Esp8266-12E WIFI Module
- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
₹150.00 (Price is Exclusive of GST)Esp8266-12E WIFI Module
₹150.00 (Price is Exclusive of GST)