-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
DC L-Shaped BO Motor for Smart Car Robot
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 150 RPM
- Rated Torque: 0.8 Kgcm
-
DC Geared Motor – 12V (10 to 1000 RPM)
- DC supply: 4 to 12V
- Total length: 46mm
- Motor diameter: 36mm
- Motor length: 25mm
- Brush type: Precious metal
- Gear head diameter: 37mm
- Gear head length: 21mm
- Output shaft: Centred
- Shaft diameter: 6mm
- Shaft length: 22mm
- Gear assembly: Spur
- Same size motor available in various RPM
-
Brushless Motor – A2212
- Motor KV: 1000
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
- Prop Adapter is quality tested before shipping to customers.
-
USB to RS232 TTL Converter Module Adapter Board
Features:
Single Chip USB to UART Data Converter
Integrated clock without external oscillator
Integrated USB transceiver does not require external resistors
On-Chip Power-On Reset Circuit . On-Chip Voltage Regulator 3.3V Output USB Function Controller
USB specification 2.0 full speed (12 Mbps)
USB abort status supported by the SUSPEND and RI pins -
L293D Motor Driver Board
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
₹45.00L293D Motor Driver Board
₹45.00 -
4 Bits Digital Tube LED Display Module With Clock Display
- Driver Chip:Â MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 30 mA
- Display Dimensions: 42x24x12 (LxWxH) mm
₹75.00 -
PNP Transistor – BC557 and S8550
- Bi-Polar PNP Transistor
- DC Current Gain (hFE) is 300 maximum
- Continuous Collector current (IC) is 100mA
- Emitter Base Voltage (VBE) is 6V
- Base Current(IB) is 5mA maximum
-
Robo Car DIY Kit with UNO Line Follower Obstacle Detector Edge Detector Maze Solver
Package Contents:
1x UNO R3 Board with USB Cable
1x 2WD Robo Car Kit
4x IR Sensor Module
1x Ultrasonic Sensor
1x L293D Motor Driver Board
3x Jumper Wire , 1x Male to Male, 1x Male to Female, 1x Female to Female with 20 Wires Each₹1,400.00₹1,900.00 -
LED (Light Emitting Diode) 5MM
- Voltage : DC 1.5V – 3.0V
- Head Size (Approx) : 5mm
- Quantity: 60 Pieces (6 colors x 10pcs). Emitting Color: White/Red/Green/Blue/Yellow/Orange
- Every led diode are colored in head, use compartments to distinguish colors, easy to recognize and find the one you needed.
-
Arduino UNO DIY Kit – Professional Electronics Starter DIY Kit – V2
This DIY Kit with UNO R3, USB Cable, LEDs, Buzzer, Switch, Breadboard, Servo SG90 Motor, PIR Motion Sensor, Ultrasonic Sensor, LCD 16×2, 4×4 Keypad, IR sensors, Relay board, L293D Motor Driver Board, Male and Female Header Strips and Jumper Wires
₹1,699.99₹2,350.00Arduino UNO DIY Kit – Professional Electronics Starter DIY Kit – V2
₹1,699.99₹2,350.00
