-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST)
-
₹10.00 (excl. GST)3E9 10W 5% Axial Lead Ceramic Encased White Wire Wound Resistors
₹10.00 (excl. GST) -
₹10.00 (excl. GST)68E 5W 5% Axial Lead Ceramic Encased White Wire Wound Resistors
₹10.00 (excl. GST) -
₹10.00 (excl. GST)50E 5W% Axial Lead Ceramic Encased White Wire Wound Resistors
₹10.00 (excl. GST) -
₹10.00 (excl. GST)
100E 10W 5% Axial Lead Ceramic Encased White Wire Wound Resistors
₹10.00 (excl. GST) -
Glue Stick 10 MM for Glue Gun
Glue Stick 10 MM used for prototyping purposes. It can be used with big Glue Gun. The stick diameter is 10mm.
₹10.00 (excl. GST)Glue Stick 10 MM for Glue Gun
₹10.00 (excl. GST) -
40 Pin IC Base – DIP IC Socket Connector
- Product type: IC base
- Function: to easy insert, remove and reinsert the programmable chips and ICs in the PCD and neglect the component damage because of heat during soldering
- Number of pins: 40
- Package contains: 5 x 40 pin IC base
₹10.00 (excl. GST)40 Pin IC Base – DIP IC Socket Connector
₹10.00 (excl. GST) -
24 Pin IC Base – DIP IC Socket Connector
- Product type: IC base
- Function: to easy insert, remove and reinsert the programmable chips and ICs in the PCD and neglect the component damage because of heat during soldering
- Number of pins: 24
- Package contains: 5 x 24 pin IC base
₹10.00 (excl. GST)24 Pin IC Base – DIP IC Socket Connector
₹10.00 (excl. GST) -
SW420 Tilt Ball switch 2801 ball sensor
- Operating voltage: 5V
- Contact Resistance: < 10 Ohms
- Trigger Angle: 15°
- Pins have no polarity
- This series of products is a ball sensor switch, up and down, or. Tilt over 15 degrees is conductive
- The series switch is normally open at rest (OFF) state, when the external force to achieve the corresponding flip, or at a proper angle of tilt, trigger switch.
- The trigger sensitivity of the inductive switch is very high
- Fully sealed package, waterproof, dustproof.
₹10.00 (excl. GST)SW420 Tilt Ball switch 2801 ball sensor
₹10.00 (excl. GST) -
Infrared IR Transmitter and Receiver (Photo-diode) Pair
Features:
- IR LED (TSFF5210)
- Package type: leaded
- Dimensions : 5mm
- Leads with stand-off
- Peak wavelength: λp = 870 nm
- High reliability
- High radiant power
- High radiant intensity
- Angle of half intensity: = ± 10°
- Low forward voltage
- Suitable for high pulse current operation
- High modulation bandwidth: fc = 24 MHz
- Good spectral matching with Si photodetectors
- IR Photodiode (BPV10NF)
- Package type: leaded
- Dimensions : 5mm
- Leads with stand-off
- Radiant sensitive area (in mm2): 0.78
- High radiant sensitivity
- Daylight blocking filter matched with 870 nm to 890 nm emitters
- High bandwidth: > 100 MHz at VR = 12 V
- Fast response times
- Angle of half sensitivity: ± 20°
₹10.00 (excl. GST)Infrared IR Transmitter and Receiver (Photo-diode) Pair
₹10.00 (excl. GST) - IR LED (TSFF5210)
-
650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
- Output Power: 5mW
- Working Voltage: 5V DC
- Working temperature: -10 ℃~＋40 ℃
- Housing material: Copper
- Working life: more than 2000 hours
- Spot mode: Dot Facula (continuous output)
- Laser wavelength: 650nm red-colored.
- Operating current: <40mA
- Power lead length: 120mm.
₹9.50 (excl. GST)650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
₹9.50 (excl. GST) -
Universal Heat Sink (25 x 25 x 10 mm)
- Quantity of blade: 8
- Material: Aluminum
- Color: Black
- Blade thickness: 1mm
- Base plate thickness: 2mm
- Dimensions: 25 x 25 x 10 mm
₹9.00 (excl. GST)Universal Heat Sink (25 x 25 x 10 mm)
₹9.00 (excl. GST) -
₹9.00 (excl. GST)Plastic Metal SPST 3 Pin 2 Way Toggle Switch 3A/5A AC 250V/125V
₹9.00 (excl. GST)
